Reviews Inch To Inch Pvc Reducer

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

BELL PSB37550GY Single-Gang Weatherproof Three 1/2 in. or 3/4 in. Threaded Outlets, 2 in, Gray

  • Mounting hardware and installation instructions included.
  • Includes (2) 3/4 inch closure plugs and (3) reducer bushings.
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!.
  • One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value fo....
Check Stock

CURT 45408 Trailer Hitch Receiver Adapter Reducer Sleeve Set, 3 to 2-1/2 or 2-Inch, 2-Piece

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve set is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve set is fast and easy. You can use each of the included reducer sleeves as needed by simply inserting them into your hitch receiver (hitch pin sold separately).
Check Stock

AIDA Duplex Receptacle Wall Outlet Residential 3-Wire Self-Grounding 15Amp 125V UL Listed Push & Side Wire White 10 Pack

  • Mounting hardware and installation instructions included.
  • Includes (2) 3/4 inch closure plugs and (3) reducer bushings.
Check Stock

CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

Leviton 42777-1WB Surface Mount Backbox, Single Gang, White, 1.45-Inch

  • Mounting hardware and installation instructions included.
  • Includes (2) 3/4in. closure plugs and (3) reducer bushings.
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

5-1/2 Inch 18 Tooth ATB Fast Cutting and Trimming Saw Blade, Cordless Trim Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10-mm Reducer Bushings Include) - 2 Pack

  • DIMENSIONS: Diameter: 5-1/2 inch (140mm).
  • Arbor size: 5/8 inch(16mm) (1/2-Inch and 10-mm Reducer Bushings Include).
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • FEATURES: Expansion slots to prevent warping, anti-kickback tooth design for impact resistance..
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with super thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • WHAT YOU GET: 2 Pack 5-1/2 Inch 18 Tooth ATB Fast Cutting Trimming Saw Blade with Arbor size: 5/8 inch(16mm) (1/2-Inch and 10-mm Reducer Bushings Include) compatible almost cordless portable saw, portable saw, trim saw, circular saw..
Check Stock

POWERTEC 70322 4 to 2-1/2 Reducer and 4 Dust Control Flex Cuff with Hose Clamps

  • INCLUDES: (1) 4” to 2 1/2” Dust Collection Hose Reducer & (1) Flexible Hose Cuff Coupler with (2) Dust Hose Clamps.
  • REDUCER'S FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop....
  • FLEX CUFF'S FUNCTION: Provides a perfectly sealed, airtight connection between a pair of 4 inch OD dust collection equipment ports, hoses or fittings.
  • PREMIUM BUILD: Reducer made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.....
  • DIMENSIONS: Reducer - 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID.
  • 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.....
Check Stock

TuoLauthon 45 Degree 3 to 3-1/2 inch 76-89mm Silicone Reducer Coupler Hose,4-Ply Reinforced,Length 4inch 102mm with 2PCS clamps Turbo/Intercooler/Intake Piping Reducer Coupler

  • Thickness: 5 mm,Size: ID 3inch to 3-1/2 inch (76-89mm), OD3-1/2-4 inch (89-102mm)..
  • Made of high-quality silica gel and other anti-aging materials, it has excellent compression resistance and high pressure resistance. Not for oil or....
  • Heavy duty & high quality heat resisted Silicone hose/ reducer/ coupler for intercooler, turbo, supercharger or intake..
  • Working Temperature: -76 F (-60C) to +500 F (+260 C), Working Pressure: 0.3Mpa (43.5 PSI) to 0.9Mpa (130.5 PSI), Bursting Pressure: 245 PSI, 2Mpa.
  • Package including: 1pc silicone 45 Degree Black Silicone Reducer Coupler, 2pcs Stainless Steel Hose Clamps..
Check Stock

DGT35 Galvanized Round Transition (5\)

  • 【Size】Made of galvanized steel. Adapts 8 inches to 6 inches. Round Ducting Adaptor.
  • 【Widely Application】Designed for bathroom extractor fans, HVAC systems, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchen..
  • 【Adventages】Maintains airflow efficiency by creating a connection between two different sized duct openings..
  • 【How to Use】The solid duct reducer or increaser can be used when connecting two different solid or flexible ducts or ducts to ventilators, 8 to 6 inch, or vice versa..
  • 【Easy to Install】Put it in the two ducting, easy to install the air duct reducer..
Check Stock