Reviews Inch Bsp Pipe Fittings

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

2 Pack G 1/2 BSP Female Thread to US 1/2 NPT Male Thread Pipe Fitting,Brass Pipe Fitting Adapter,G to NPT Adapter 1/2 Inch

  • Size: 1/2 inch G thread (metric BSP) female thread to 1/2 inch NPT (standard pipe thread) male thread. G thread can fit BSP,NPS and G thread.
  • Sturdy material: made of high-quality brass, sturdy and corrosion-resistant.
  • Leak-proof design: the adapter is equipped with a rubber gasket to prevent leakage.
  • Please note: G thread (BSP) and NPT thread are two different threads, please purchase after confirmation..
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse

  • PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
  • The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
  • Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
  • Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
  • Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
  • tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
  • PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
  • Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

10 Pieces Airbrush Adapter Set Includes Airbrush Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Female Couplings Nylon Braided Airbrush Hose for Air Compressor and Airbrush Hose

  • ...pter kits are made of quality metal material, which endows these accessories with sturdy and strong structure, makes them not easy to break or deform, anti-corrosion and anti-rust, durable to provide you long term application.
  • Simple to assemble: the quick release airbrush fittings are easy to connect and disconnect airbrush without screw trouble, with smooth threads which are convenient for you to assemble in several seconds, saving you much effort and time.
  • Compatible with: the airbrush quick disconnect set is compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex airbrush and most China airbrush, able to satisfy your multiple replacing needs and practical to use.
  • Convenient to change: the airbrush adapter fittings come in simple design with metallic finish, are ideal airbrush connectors to attach an air hose to an airbrush, help quickly change airbrushes when you use multiple airbrushes.
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • ...ed or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut..
Check Stock

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

  • COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
  • ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
  • TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
  • 3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
  • MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Check Stock

OBPSFY 5PCS BSP Pipe Tap Set,Bearing Steel Threading Taps Tool for clean/re-thread damaged/Jam Pipe threads（1/8\

  • * Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.5 Different Sizes ，great for tapping various threads, meet your different needs..
  • * BSP Pipe taps are used to cut new threads or repair damaged threads / jam pipe threads and have excellent results,it is the best choice for your toolbox..
  • * In accordance with National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8.
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock