Reviews Hydraulic Transmission Jack
2 Stage Transmission Jack 1600lbs Capacity, 2 Springs Load Hydraulic Jack, 360° Swivel Wheel Garage/Shop Lift Hoist with Brakes, Red
- 【1600 LBS Load Capacity】: Telescopic 2 stage hydraulics upgrade 2 reinforced springs with 1600lbs load capability for greater lift range, precise load control and rapid lift.Upgrade 2 bolts with pull rings to help you reset 2 stage telescoping transmission jack manually..
- 【High Quality】: From the highest grades of rugged steel, to the wear-resistant Y-style sealing rings, to the super strong QT 450 Nodular Iron hydraulic pump, right down to the high/low temperature-resistant (40°F to 105°F) hydraulic oil. We uses quality components built to exacting standards to deliver top performance and reliability of transmission jack..
- 【Precise Positioning】: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done..
- 【Stable and Easy to Move】: The transmission jacks' sturdy base increase 2 brakes for 4 heavy-duty 360º swivel casters to prevent the sliding during use. Adding effortless maneuverability. Once your jack is in place, the smooth, manual-operated hydraulic system makes easy work of lifting and low....
Check StockVEVOR Transmission Jack,3/5 Ton/1322 lbs Capacity Hydraulic Telescopic Transmission Jack 2-Stage Floor Jack Stand with Foot Pedal 360° Swivel Wheel Garage/ Shop Lift Hoist Red
- 1322 LBS Loading Capacity: Our 1322 lbs / 0.6 ton 2-stage hydraulic telescoping transmission jack helps you easily guide a transmission securely. Great for any automotive or light truck transmission installation or removal. See where the problem is and solve it with a quality transmission jack..
- 33-1/2" -67" Lifting Range: Enhanced hydraulic pressure for an extended lifting range, the pedestal transmission jack with a 33-1/2 inch to 67 inch lift range, our jack can lift your car to any suitable height. Comes with a foot-operated pedal, so it's easier to rise, and free up your hands..
- Precise Positioning: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done..
- Easy to Move: Features 4 pcs swivel casters, so there is no need to worry about how to transport it to another car. An auxiliary ring is fixed at the middle of the jack, making it convenient for your hands to push or pull when you move it..
- Premium High-Grade Steel: Durable frame is constructed of high-grade steel for quality and durability. A wide ba....
Check StockGZYF 1100LBS 2 Stage Hydraulic Transmission Jack w/ 360 Degree Swivel Wheels Telescopic Lift Hoist
- Foot-operated pump and lowering pedal for hands-free rising of the ram, allow mechanic to position and align the transmission.
- Two 31" long safety chains for securing the transmission on the saddle.
- Telescopic 2-stage hydraulic ram for greater lift range.
- Features fully adjustable saddle with corner brackets.
- Universal hydraulic transmission jack, Applied for most automotive or light truck transmission installation or removal..
Check StockAFF Fuel Tank Adapter, Transmission Jack Accessory, 3198
- Version 2.0, functional upgraded with dual springs, higher pressure, increased the stability and the lift speed.
- This is our newest 1300LBS / 0.6T Upgraded Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
Check StockPro Lift Low Profile Transmission Jack - Heavy Duty Roll Under Floor Jack High Lift from 9 to 24 inches with 1100 Lbs (1/2 Ton) Capacity for Car Light Truck
- Pro -Lift Transmission Floor Jack with 1100 lbs capacity is designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles..
- The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins.
- Hydraulic system is protected from internal damage by a patented by-pass mechanism. Rugged steel wheels and full swivel ball bearing casters..
- U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage. Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load.
- Load-restraining chain is vital for raising and lowering safety. Four wheel casters allow easy movement, positioning of transmission jack.
Check Stock1100 LBS Transmission Jack 2 Stage Hydraulic with Pedal 360° Swivel Wheel Lift Hoist Adjustable Height Hydraulic Telescoping Transmission Jack Fit for Car Lift
- ✔STRONG LOADING: Transmission jack holds up to 1100LBS / 0.5T weight and extends from 33"(850mm) to 70"(1790mm).
- ✔PRECISE POSITIONING: An adjustable tray and the pedal type design of the hydraulic transmission jack enable you to position and align the transmission more precisely..
- ✔EASY TO MOVE: 4 cast iron swivel casters and a auxiliary pulling ring help you move the jack for lift more easily..
- ✔HIGH QUALITY: Strong steel construction for maximum durability, and paint coated surface for rust-resistance..
- ✔APPLICATION: Any automotive or light truck transmission installation or removal and other objects weighing no more than 500KG..
Check StockUERST Transmission Jack Lift 1100lbs 2 Stage Capacity Adjustable Height Hydraulic Transmission Jack 360° Swivel Wheel Lift Hoist
- The telescoping transmission jack is built in ISO certified facilities and engineered using the same systems as Aerospace Technologies and the Automotive OEM sector. This jack is also tested for reliability and safety, meets ASME safety standards..
- The sturdy base increase 2 brakes for 4 heavy-duty 360º swivel casters to prevent the sliding during use. Adding effortless maneuverability. Once your jack is in place, the smooth, manual-operated hydraulic system makes easy work of lifting and lowering. Slow release valve (knob above the foot pedal) that enables the user to slow the rate of descent as needed..
- Frame is constructed of high-grade steel and built to exacting standards for quality and durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Paint is oil, grease and dirt-resistant for easy cleanup. Piston-ram is treated and polished to resist skiving..
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life..
- Reinforced springs with 1100lbs load capability for greater lift range, precise load control and rapid lift. Upgrade 2 pull rings to help you reset 2 stage t....
Check StockHTTMT- New 1100 LBS 2 Stage Hydraulic Transmission Jack w/ 360°Swivel Wheels Lift Hoist [P/N: ET-CAR-FIX004-0.5T-Yellow]
- This is our 1100LBS Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
- Suitable for Any automotive or light truck transmission installation or removal.
Check StockXKMT- 33 To 70 Professional Hydraulic Transmission Jack 1100 lbs/ 0.5 Ton 2 Stage for Car Lift [P/N ET-CAR-FIX004-0.5T-YELLOW]
- This is our 1100LBS Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
- Suitable for Any automotive or light truck transmission installation or removal.
Check StockHTTMT- 34\ To 73\ Professional Dual Spring Hydraulic Transmission Jack Car Lift 1300 lbs/ 0.6 Ton 2 Stage Dual Spring [P/N: ET-CAR-FIX004-0.6T-YELLOW]
- Version 2.0, functional upgraded with dual spring, higher pressure, increased the stability and load capacity,as well as the lift speed than single spring.
- This is our newest 1300LBS / 0.6T Upgraded Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
Check StockVEVOR Electric Car Jack 5 Ton Car Jack Hydraulic, Electric Floor Jack with Electric Impact Wrench, LED Light Hydraulic Jack Car Repair Tool, 155-420 mm Lifting Range for SUV MPV Sedan Truck Repair
- ... The two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows getting power from the car battery. The built-in tire pump will inflate the tire quickly and get your work done..
- High-Quality Material: The copper motor drives to ensure good transmission performance: enlarged and sturdy baseplate, large contact area, and stress more uniform. The jack head uses a non-slip design: a cross-shaped groove plus particles protruding from the surface to increase friction. The electric floor jack adopts a fully enclosed structure, which is completely waterproof and does not leak oil to ensure safety during use..
Check StockOEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle
- HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
- Hydraulic jack lift is built for performance and ease of use.
- Valuable shop floor jack or garage floor jack.
- LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
- These low profile floor jacks have a maximum lifting height of 14 inches.
- SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
- 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
- PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
- Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
- Easily transport this portable car lift around your garage.
- PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
- (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock9TRADING 1100 lbs Auto Transmission Jack Adapter Capacity Transform Automotive Floor Jack
- OTC's rugged, stable, 2,000 lb. capacity transmission jack is ideal for handling heavy transmissions like the Eaton Fuller Roadranger transmissions used in most Class 7 & 8 trucks (adapter included).
- Low profile design gets under the lowest clearance trucks making it ideal for clutch repair work.
- Built in safety overload feature prevents using the jack beyond its rated capacity.
- safety bypass protects the hydraulic cylinder from damage.
- Features a pump handle that conveniently rotates a full 360 degrees for use in any position and 3.5 inch, ball bearing swivel casters for easy jack positioning.
- Min. height - 6-7/8 in., max. height - 35-1/4 in., max. forward tilt - 24 deg., max. backward tilt - 18 deg., max. side tilt (either side) - 11 deg., overall length - 43-1/2 in., overall width - 26 in..
Check Stock