Reviews Hydraulic Directional Valves

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

Rule Evacuator 8000-High Capacity Submersible 12 Volt DC Utility Pump (Yellow/Black)

  • Manual hydraulic water pressure test pipeline tester..
  • Suitable for water,or hydraulic oil as a medium,for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy,to provide the required pressure.
  • for chemical, construction, plumbing, oil,coal, Shipbuilding and other industries..
  • Normal tap water pressure of 0.3MPa,high-rise residential 0.4MPa,water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa.(Tap water 0.1MPa 1KG pressure).
Check Stock

Cal Royal 420PALUM 400 Series Dual Valve Door Closer

  • High quality hydraulic fluid for high lubricity and constant lubrication.
  • Dual valve, closing and latching speed controlled by two separate regulating valves.
  • Rack and pinion operation contained in a high tensile precision cast aluminum housing for the highest quality.
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 311 with

  • 105 Degree Backstop No Hold-Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock