Reviews Electro hydraulic Valves

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

9L2Z7G391A Automatic Transmission Control Solenoid Pack Assembly Fits for Ford Explorer 2003-2010 Mustang 05-10 Thunderbird 04-05 Mercury Mountaineer 03-10 Lincoln Aviator 03-05 LS 04-06 5R55S 5R55W

  • Transmission solenoids are one of your automatic transmission’s many critical components. A transmission solenoid is an electro-mechanical component “valve” used to control the flow of transmission fluid in the transmission, and they open and close as per the electrical signals they receive from your vehicle’s engine or transmission control unit, which pulls its data from a series of speed sensors in the engine..
  • Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. If one of these electro-mechanical valves fail, then all sorts of transmission problems can ensue..
  • This Automatic Transmission Control Solenoid Fits For the Following Vehicles: 2003-2010 Ford Explorer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L.
  • 2007-2010 Ford Explorer Sport Trac 6 Cyl 4.0L , 8 Cyl 4.6L.
  • 2005-2010 Ford Mustang 6 Cyl 4.0 , 8 Cyl 4.6L, 8 Cyl 5.4L.
  • 2004-2006 Lincoln LS 6 Cyl 3.0L, 8 Cyl 3.9L.
  • 2003-2010 Mercury Mountaineer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L..
  • Customers can find the product you need accurat....
Check Stock

Samorillo 5-Pack Replacement Bite Valve for Osprey Hydraulics Reservoir - BPA-Free, Phthalate-Free, Lead-Free - Silicone Nozzle - Value Pack for Osprey Hydration Bladders

  • Value Pack: 5 pack of replacement bite valves for Osprey Hydraulics reservoirs & hydration bladders at an incredible value. No more dirty, moldy bite valves leaving a bad taste in your mouth - our value pack allows you to replace your bite valve more frequently for a more enjoyable experience.
  • Food-grade, OEM Quality: We have designed our bite valve to meet OEM quality, based on in-house testing. Made from BPA-free, phthalate-free, lead-free, food-grade silicone, our bite valves have the perfect balance of softness and rigidity to give you a great drinking experience and hold up to extended use.
  • Perfect Fit: Each one of our bite valves provides a perfect fit for your Osprey Hydraulics reservoir (including LT reservoirs) - not designed to be compatible with other brands of hydration bladders. As with the OEM part, it will provide fast, smooth water flow, a self-seal after each sip and a leak-free experience.
  • Easy To Replace: Simply pop off the dirty, old mouth piece and install your new Samorillo replacement bite valve. Quick and easy - replace it in under 30 seconds.
  • Please note: This is an aftermarket replacement product (produced by Samorillo, LLC). We have no affiliation with or endorsement from any of the manufacturers mentioned.
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

Rule Evacuator 8000-High Capacity Submersible 12 Volt DC Utility Pump (Yellow/Black)

  • Manual hydraulic water pressure test pipeline tester..
  • Suitable for water,or hydraulic oil as a medium,for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy,to provide the required pressure.
  • for chemical, construction, plumbing, oil,coal, Shipbuilding and other industries..
  • Normal tap water pressure of 0.3MPa,high-rise residential 0.4MPa,water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa.(Tap water 0.1MPa 1KG pressure).
Check Stock

Cal Royal 420PALUM 400 Series Dual Valve Door Closer

  • High quality hydraulic fluid for high lubricity and constant lubrication.
  • Dual valve, closing and latching speed controlled by two separate regulating valves.
  • Rack and pinion operation contained in a high tensile precision cast aluminum housing for the highest quality.
Check Stock

Osprey Hydraulics Silicon Nozzle Three Pack

  • 3 pack of replacement nozzles for your Osprey hydraulics reservoir bite valve.
  • Oem replacement for all 2016 Osprey hydraulics bite-valves.
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 311 with

  • 105 Degree Backstop No Hold-Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

Cardone 20-0038F Remanufactured Domestic Power Steering Filter

  • 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function.
  • All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability.
  • All units are built with 100% new seals and o-rings.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Shafts are 100% processed to ensure surface finish is within O.E. tolerances.
Check Stock