Reviews Hydraulic Cylinder Rod

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

  • The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
  • Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
  • for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
  • Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.
Check Stock

1543262C1 Loader Lift Cylinder Seal Kit Fits Case 480D 580C 580D 580SD 580E

  • One New Aftermarket Replacement Hydraulic Cylinder Seal Kit.
  • Fits Case Backhoe Loader, Crawler Dozer / Loader, and Wheel Loader Cylinder Models With One Piece Rod Pistons..
Check Stock

Kit King - Case 128728A1 Aftermarket Hydraulic Cylinder Seal Kit

  • Case equipment types: backhoe loaders, landscapers, loaders, skid steer, unimog, uni loaders & more.
  • CASE Equip. Models: 1830, 1835, 1835B, 1835C, 1838, 1840, 1845, 1845B, 1845C, 1845S, 480, 480B, 480C, 480D, 480E, 580, 580B, 580C, 580D, 580 Super D, 580 Super E, 480E LL, 480LL, MB4/94 & More.
  • Typical hydraulic applications: bucket, tilt.
  • Cylinders: 118110A1, G103407, G33128, G34926 & More - Double Check Rod Size and Cylinder Numbers. Two Cylinder Sizes May Exist On Your Equipment Model.
Check Stock

Enerpac - RC102 RC-102 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 2.13\ Stroke

  • Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke.
  • Round body with single piston rod for use in general purpose applications in any position.
  • High-strength alloy steel with baked enamel finish for corrosion resistance.
  • 10-ton cylinder capacity for lifting or pushing.
  • Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately).
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

ACDelco Professional 530-300 Premium Gas Charged Rear Shock Absorber

  • a hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping....
  • drawn over mandrel (dom) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • o-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Check Stock

WEN WT4030 Cross Tube Hydraulic Cylinder with 4 Bore and 30-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 30-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 40-inch cylinder extends out to 70 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT4008 Cross Tube Hydraulic Cylinder with 4 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 4-inch bore, a 8-inch stroke, and a 2-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock

WEN WT3508 Cross Tube Hydraulic Cylinder with 3.5 Bore and 8-inch Stroke, Black

  • Double-acting steel-welded design creates pressure up to 3000 PSI.
  • Features a 3.5-inch bore, a 8-inch stroke, and a 1.75-inch rod diameter.
  • SAE-8 port (3/4 inch-16UNF) connects easily to your hydraulic hose.
  • Retracted 18-inch cylinder extends out to 26 inches in length.
  • Includes a polished chrome-plated rod, and a two-year warranty.
Check Stock