Reviews Hydraulic Cylinder Kit

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

  • High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
  • Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
  • Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
  • Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
  • Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
  • Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..
Check Stock

G109456 & G109417 & G109423 & G109452 & G109460 & G109504 Whole Machine Hydraulic Cylinder Seal Kit for Case 580SE, 580 Super E Hydraulic Cylinders

  • 【WIDE COMPATIBLY】: Includes all standard equipment cylinder seal kits fits for 580SE /580 Super E. Perfect matches OEM Kit, all parts and seals are included. This Is An Aftermarket Part Made To Replace Its OEM Counterpart..
  • 【EXCELLENT FUNCTION】: This high-quality seal kit allows to fast repair the cylinder from leaking, benefit to rebuilds the standard Hydraulic Cylinder. These seals never wear out and can be resealed without any issues..
  • 【SUPERIOR MATERIAL】: Made of durable environmental plastic & natural rubber with resists Oxidation, wear, tear, UV Rays and Solvents for a long service life. All of the components of this kit meet or exceed OEM specifications..
  • 【PACKAGE INCLUDED】: 2 - Loader Bucket Tilt # G109456.
  • 5 - Backhoe Swing, Stabilizer, Stick # G109423.
  • 【SATISFACTION GUARANTEE】: We aim to give our customers the best products and services. If you're not 100% satisfied with this Hydraulic Cylinder Seal Kit, simply return it for a full refund in 30 days. Support 12 months’ warranty..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

Amarine Made Boat Marine 5 Spoke 13-1/2 Inch Destroyer Steering Wheel with Black Foam Grip and Knob

  • 13.5'' Steering Wheel: Made of aluminum alloy and high-quality plastic. This boat hydraulic steering kit is anti-aging, corrosion-resistant, and high-density. The anti-slip wave design can make your operation more comfortable..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Aluminum Alloy Casing: Our hydraulic steering kit for boats features high-strength aluminum alloy casing ensuring wear resistance and corrosion resistance, and effectively prevent seawater erosion..
  • Compact & Neat: The hydraulic pump has a compact internal structure and a stylish exterior. The hydraulic pump of our boat steering system for boats rated to a maximum of 300 HP..
  • Wide Application: These boat steering parts are suitable for ships under 300HP horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

269 Motorsports Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 & Z06 TAMCKYB

  • Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 and Z06.
  • Custom Tilton Adjustable Master Cylinder.
  • Unrestricted and Heat-Wrapped Clutch Hydraulic Line.
  • Includes All Necessary Hardware and Easy to Understand Instructions.
  • Flows More Fluid Than Any Other Master Cylinder Available.
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

1543262C1 Loader Lift Cylinder Seal Kit Fits Case 480D 580C 580D 580SD 580E

  • One New Aftermarket Replacement Hydraulic Cylinder Seal Kit.
  • Fits Case Backhoe Loader, Crawler Dozer / Loader, and Wheel Loader Cylinder Models With One Piece Rod Pistons..
Check Stock

Bonvoisin 20T Hydraulic Cylinder Jack Porta Power Ram 2\ Stroke Mini Single Acting Lifting Cylinders for Machinery Shipbuilding

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

NEWTRY 20T Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump Multi Section Jack, 1.18” Stroke Industrial Mini Hydraulic Cylinder

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has m....
Check Stock