Reviews Hub Puller Tool

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

KIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check Stock

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

  • 【SPECIFICALLY DESIGN】-- ①3/4'' custom drive screw, 5-10 times longer than similar designs, which with special equalizer washer provide smooth operation. ②Jaws designed and sized to property fit hub applications and is quickly located on the puller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
  • 【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry and storage. keeps all tool great and organized..
  • 【SATISFACTION GUARANTEE】-- Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with This 6575 Hub Grappler Kit, simply return it for a full refund in 30 days, guarantee with 1 year’s warranty..
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock