Reviews Safe Puller Tool

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

DMDMBSR Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design

  • Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

  • ✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
  • ✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
  • ✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
  • ✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
  • ✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

OOir onOO Manual Stand Up Weed Puller Head Replacement Tool, 4-Claw Steel Head Design, Black

  • Upgrade Design – NEW and IMPROVED steel head design for a stronger weed removal tool..
  • Premium Material – Standing weed puller Made of steel, Not easy to break.Note: This Weed Puller has no handle, only manual weeding head..
  • Stand Up Design – Easily Remove Weeds Without Bending, Pulling, or Kneeling..
  • Modern & Safe Design – Steel 4-claw design works on all soil types especially after a good rain or watering..
  • Wide Application – The weed puller is workable for crabgrass, thistle, tap root, crab grass, taproot, plantain, clover, burdock, bush etc. It is a good tool for your garden, backyard, patio, lawn, etc..
Check Stock

2 Packs Dent Removal Kits - Powerful Car Dent Puller Small Large Car Dent Repair Kit Auto Dent Remover Tool for Car Repair, Glass, Screen, Objects Moving

  • 【Note】- Dent puller doesn't work on curved surface (of which a car has many) !.
  • 【Attentions】- Before purchase, please determine whether the location of the car dent is elastic surface deformation.
  • plastic surface deformation(Such as car bumper and four bodies with metal material) can not be directly repaired through the dent puller repair, Repairs can only be carried out at a professional car repair shop..
  • 【Upgrade Unique Design】- Upgrade dent remover tool for car with our ergonomic palm-fit dent remover tool. One-touch hand pulling is effortless and comfortable, while the side bullhorn ensures safe, hassle-free kit removal..
  • 【Strong Suction Cup】- This is a dent remover tool specially designed for elastic surface deformation repair.The maximum suction power reaches 180 lb and the small one reaches 130 lb.
  • Improved curved rubber suction cup has stronger grip and better suction power than traditional ones, making the dent puller easier and more efficient to use. (The dent puller diameter should exceed the suction cup base diameter for vacuum adsorption. Large: 4.3in. Small: 2.3in)..
Check Stock

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

  • 【Ideal for Removing】The trim puller is specifically designed for safe removal of tiles, baseboards, hardwood floors, window trim,molding, door casings, trim panels, and even nailed or glued countertops, without using shims or board spacers..
  • 【Easy To Use】First remove or separate the caulk that seals the top of the baseboard by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet.
  • it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
  • 【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
  • 【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock