Reviews Hss Roll Forged Drills

100pc 1/8\ Shank Rotary Tool Accessory Set for Dremel (Sanding | Polishing | ...

  • Universal fit for all rotary type tools including Dremel | 1/8th Shank.
  • Sanding Band, Rubber Mandrel for Sanding Band, Fiber Glass Cutoff Wheel, Abrasive Wheel,.
  • 15pc Soft Wool, 9pc Pink Aluminum Oxide, 9pc Green Aluminum Oxide, Polishing Woolen Wheel.
  • 30pc Soft Wool, 10pc Hard Wool, Silicon Cutoff Wheel, Aluminum Oxide Cutoff Wheel,.
  • Stainless Steel Brush, Mounted Abrasive Point, Diamond Burs, HSS Burs/ Drills, HSS Burs/ Drills.
Check Stock

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

  • ...aintenance, and most general repairs..
  • 【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs..
  • 【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
  • 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel..
Check Stock

1/2” Reduced Shank Drill Bit, HHS-G Black Oxide Twist Dill Bit Metric Size Steel Metal Plastic Wood（16mm）

  • Common flute and overall length for minimal adjustment during tool changes.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Hex shank, which is suitable for most drills,fit for electric screwdrivers, hand screwdrivers, electric drills, air drills and so forth..
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

DEWALT 10-Inch Miter / Table Saw Blades, 60-Tooth Crosscutting & 32-Tooth General Purpose, Combo Pack (DW3106P5)

  • Purpose: suitable for cutting soft metals such as wood, gypsum board, plastic, PVC, aluminum and copper.
  • Suitable for most rotary tools or air tools，It is an ideal tool for DIY at hom.
  • Advanced materials: Forged with high-quality HSS, hard texture, durable, fast cutting, the maximum speed is 20000.
  • Contains: 22mm(0.87")/25mm(0.98")/32mm(1.26")/35mm(1.38")/44mm(1.73")/50mm(1.97") cutting disc.
Check Stock

Extra Long Brad Point HSS Drill Bit, 2-5mm Diameter x 150mm Length, Straight Shank Twist Drill Bits for Wood Plastic and Aluminum

  • [Metal Drill Bits Set]: The extra long HSS drill bit set comes with the following diameter: 2mm, 3mm, 3.5mm, 4mm, 5mm.
  • [Extra Length]: Length (150mm~160mm) is great for general purpose use on hand drills and allows you to access hard to areas where jobber length drills can not go.
  • [Material]: Made of High speed steel, the drill bits have a high hardness for fast, smooth cutting of plywood, hard wood and soft wood, swift bore.
  • [Wide Applications]: Ideal for most drilling jobs and materials such as aluminum, iron, wood, plastics.
  • [100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on week days.
Check Stock

Luckmart 20pcs HSS Mini Micro Twist Drill Bits Set Kit Precision Craft Tool 0.3-1.6mm

  • Drill Sizes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6mm.
  • Great for precision crafts, jewellery, watch repair, model making, hobby work, electronics.
  • Package included: 20pcs x HSS twist drills.
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • 【EXCLUSIVELY DESIGNED FOR DIY】226-Pcs tool kit includes all the drill bits/screwdriver bits/anchors screw you need. 12 x HSS 4341 Drills: 2.5/3/3.2/3.5/4/4.5/4.8/5/5.5/6/6.5/8mm, 8 x Masonry Drills: 3/4/5/5/6/6/8/10mm,7 x Brad Point Wood Bits: 3/4/5/5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

  • Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life.
  • 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth.
  • CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
  • Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
  • Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench.
Check Stock

Irwin Industrial Tools 43022 1-3/8-Inch Self Feed Bit

  • For drilling large diameter holes in wood for pipe, conduit and other applications.
  • Replaceable coarse screw point drills quickly in dry, wet and gummy wood.
  • All bits have a 7/16-Inch hex quick change impact shank that fits 1/2-Inch or larger electric drills or 7/16-Inch hex impact wrench drills.
  • Precision milled shank eliminates run out and wobble.
  • Forged in one piece from high carbon steel for Maximum strength under tough drilling conditions.
Check Stock

NordWolf 12-Piece Metric Step Countersink Cone Drills with 1/4 Hex Shank Multi Drill Saw & Automatic Center Punch Titanium HSS Set in Storage Box

  • 【Step Drills and Cone Drill】3 piece 5/9/14 step drills (4-12/20/32mm) and 1 piece cone drill (8-20mm). Laser marking of step size provide convenient and accurate drilling.
  • 【Countersink Drill Bits】6 piece countersink drill bits: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm - 90° point, three cutting edges, ideal for deep countersinking.
  • 【High Quality】All drills are HSS Titanium coated, come with 1/4" (6.35mm) hex shank, and are precision ground, heat treatment, and hardened for consistently accurate drilling or enlarging holes into sheet & non-ferrous metals, wood and plastics.
  • 【Multi-Drill Saw & Center Punch】Multi drill saw (6mm) can be used in combination with drills, saws, rotary files, reamers and routers. Automatic brass center punch provides high impact spring-loaded strike when pressed against working surface.
  • striking force is adjustable by turning cap.
  • 【Ergonomic Storage Box】Insert hex shank into black plastic holder at 10°-15° first, then push head of product down to fix firmly. Box can be re-used to store other tools by taking out foam inlay.
Check Stock

Topline Cutting Tools No. 43 Drill Bits Cobalt M42 6-Pk

  • ... utilized with a variety of hand and motorized tools. Straight Shank Mini Bits are compatible with a wide range of tool holding systems. To use with most power rotary tools, use with Gyros Mini Adaptor Chuck 45-01803. For all your hand drilling needs, pair with the Gyros Swivel Head Pin Vise 97-01818.
  • 12 Micro Twist Drills – Professional Craftsmen, Model Makers, Hobbyist, Jewelers, and Do-It-Yourself enthusiasts prefer these Gyros Mini Drill Bits, which come complete with 12 (1 Dozen) small-diameter twist drills size #43 (0.089"/2.261MM), providing quality and value for your money, and are a Must-Have for all your drilling tasks..
  • Convenient and Easy Storage – These Gyros Mini Drill Bits come in a handy clear vial storage case with a protective tight fit cover to keep drills secure and prevent them from being damaged or lost..
  • Wide Application – All Gyros Wire Gauge Mini Drill Bits are ideal for all projects that demand precise hole drilling. Gold, silver, wood, hard and soft metals, plastic, PVC, beads, and jewelry are all good candidates for Gyros Micro Drills. Some people may even try to use it to clean small carburetors’ emulsion tubes and jets. This Gyros Wire Gauge Mini Drill Bits with Clear Vial Storage is the perfect option for all of yo....
Check Stock