Reviews Hss Npt Pipe Tap

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

IRWIN Tap Set, Taper Pipe, 6-Piece (1921ZR)

  • Tap sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Die sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Precision ground heat treated alloy steel.
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

3/4\-14 NPT Pipe Tap,American Standard Tap Tool

  • Each taper tap is used to cut internal threads in pipes.
  • This taper tap is ideal for pipe fittings.
  • Taps are tapered at a rate of 3/4 inches per foot.
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • 1/4" size with 18 NPT (National Pipe Taper).
Check Stock

Hand Pipe Tap Set Drill Taper NPT 1 Inch Steel Bits Tool for Machining Thread with Plastic Box 1PCS,Tap

  • Hand Pipe Tap Set are designed to clean and re-thread damaged or Jam Pipe threads.
  • Hand Taper Set allows chips to collect in the Flutes and are well suited for most applications.
  • Drill Taper Sets have an action that engages when they are run in a clockwise direction.
  • Pipe Tap Taper, sizes 1"-11-1/2 NPT carbon steel Pipe taps in plastic pouch case.
  • Drill Pipe Tap Set feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

QWORK 1/2\ - 14 NPT Pipe Tap, Carbon Steel, for Clean and Re-thread Damaged or Jam Pipe Threads

  • Characteristics:QWORK 1/2"-14 NPT Pipe Tap is an ideal choice for pipe fittings..
  • Size: 1/2" size with 14 NPT (National Pipe Taper)..
  • Usage: Used to cut internal threads of pipes..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

Toledo Pipe 300 15682 Complete Pipe Threading Machine, 38 RPM, Aftermarket 811A fits RIDGID 300 T2 418 with Accessory Kit

  • Toledo Pipe Tools is proud to give you an alternative quality model 300 Pipe Threading Machine..
  • This workhose will be your backbone for any job you throw at it..
  • Offering great mobility with quick tear down, you can thread on site or in your shop..
  • The Model 300 comes standard with a Toledo Pipe 811A Universal Die head, HSS NPT Dies ranging 1/2"-2".
  • Heavy duty foot pedal, quick colapsing stand, 418 oiler bucket and Accessory kit..
Check Stock

1 - 11 BSPP Right hand Pipe Tap

  • 1" - 11 HSS British Standard Pipe Parallel right hand thread tap.
  • 1" is nominal pipe size - the actual thread major diameter is 33.249mm.
Check Stock