Reviews Hole Drill Bits

Greenworks 90 Piece Impact Rated Driving Set

  • SET INCLUDES: (21) 135° Split Point Black Oxide Drill Bits，(4) hex shank spade bits，(8) Hex Shank Nut Setters，(1)Magnetic Bit Holder, (27) 1 in. Insert Bits，(4) Drill Stops, (1) Countersink, (1) Center Punch, (1)Hex Key, (6) 2 in. Power Bits, (5) Carbide-tipped Masonry Drill Bits, (5) Black and Silver Brad Point Drill Bits, (4) Hole Saws, (1) Hole Saw Mandrel, (1) Carrying Case..
  • VERSATILE: Suitable for drilling wood, metal, plastic, and masonry..
  • CONVENIENT STORAGE: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized..
  • MAGNETIC BIT HOLDER: Magnetic bit holder holds drill bits for driving fasteners..
  • BLACK OXIDE FINISH: Provide superior durability and up to 50% improved lifetime compared to standard high-speed steel drill bits. They also reduce friction, giving you improved hole boring speeds..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • 【ALL-IN-ONE CONVENIENCE】- COMOWARE 246 pcs drill bit set includes a wide variety of bits for wood, metal, masonry drilling and screw driving. It is a must-have drill driver bit set in your home garage. Ideal for DIY project and home repair..
  • 【CAPABILITY & DURABILITY】- Drill bits and screwdriver bits are made from superior HSS material for improved strength and durability. And the titanium finish and black oxide coating help the bits deliver higher drilling performance on wood and metal. Whether you are a mechanic or a DIY enthusiast, this drill bits combo kit will assist you in every application..
  • 【WELL ORGANIZED CASE】- The 246 pcs drill bits sets come with a portable storage case with uncluttered layout. There is a sponge cushion inside to help prevent the drill bits from falling off or mixed use. And the blue labels with drill bit sizes on are designed for easy identification of the bit size..
  • 【COMPLETE DRILL ACCESSORIES KIT】- Screwdriver bit set: 66 x 1" screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS b....
Check Stock

WSOOX Square Hole Drill Bits for Wood, Woodworking Hole Saw Mortising Chisel Drill Bits (Size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch)

  • 【Purchase Notes】The square hole drill bits need to be used in conjunction with the mortise machine. These drill bits not usable with a hand held drill. If you want to use these drill bits on drill press, you need accessories to connect to a drill press..
  • 【Drill Bits Sizes】Drill bits diameters: 1/4 Inch (6.4mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm)..
  • 【Easy to Drill】The carbide drill bit tipped is sharp and wear-resistant. With high hardness and long service life. The drill sleeve has a U-shaped design to facilitate the discharge of wood chips and improve the drilling efficiency..
  • 【Widely Applications】This square hole drill bit is suitable for wood, including MDF, MDF, particle board, channel wood, pine wood, basswood, etc. Note: It is not suitable for processing metal, glass, plastic, concrete, gypsum board etc..
  • 【After-sale Service】WSOOX tools store provide customers with quality but affordable tools. If you have any problem with these square hole drill bits, please contact us feel free and we will reply you within 24h..
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

Drilax 4 Inch Diamond Hole Saw Ceramic Porcelain Tile Quartz Granite Countertop Glass Bottle Super Long Life Vacuum Brazed Technology Single Pack Tile Drill Bit 4 inch

  • 4 inch super long life vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots.
  • Standard 3/8 inch shank fits standard drill electric or cordless..
  • High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Extra long (tall) diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop.
  • Tall enough to go through 3cm thick countertops ceramic tile, diamond core bits for granite and quartz countertop.
Check Stock

BlueNatHxRPR 5 PCS 1" to 1-1/2" Wood Spade Drill Bit Set Wood Paddle Flat Bits

  • Production Name: Wood Spade Drill Bits Set, Bits Size Included:1, 1-1/8,1-1/4, 1-3/8,1-1/2", Bits Quantity: 5 PCS.
  • Made of high steel and very durable,widely used for wood, PVC,and other soft woody material as hole cutting.
  • HIGH QUALITY: Self-centering spade tip for spot-on starts, locate hole circle center firmly,drill hole more smoothly and regularly.
  • HIGH EFFICIENCY: Flat paddle design features sharp cutting edges, ensures the hole smooth clean, much faster than traditional wood drill.
  • QUICK-CHANGE HEX SHANK - 1/4" hex shank with groove helps reduce slipping and prevent falling off as well as safety, universal for the most drill driver tool of brands in the markets,one drill use all drill bits.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock