Reviews Holder Terminal

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...able (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
Check Stock

0 Gauge AWG 100% OFC Copper Power Amp Amplifier Wiring Install Kit 4000 Watts

  • Includes 17’ 1/0 Gauge red power cable, 3’ 1/0 gauge black ground cable, and 15’ amp turn on wire.
  • Gold ANL In-Line fuse holder with gold ANL fuse.
  • Gold power ring terminal and ground terminal.
  • Red and black 1/0 gauge ring terminal with sleeve and two 14/16 gauge butt and spade terminals.
  • Cable ties and 1/0 Gauge firewall grommet.
Check Stock

ASI ASIUK5HESI DIN Rail Fuse Disconnect Terminal Block, Screw Clamp, 5 mm x 20 mm, 8 mm Wide, 12 Amp, 600V, 26 AWG to 10 AWG (Pack of 50)

  • Compact 5 x 20 mm Fuse holder Terminal Block used in control circuit applications.
  • Low Cost alternative fuse holder terminal block.
Check Stock

ASI ASIUK5HESILED24 DIN Rail Fuse Disconnect Terminal Block, Screw Clamp, 5 mm x 20 mm, 8 mm Wide, 6.3 Amp, 800V, 26 AWG to 10 AWG (Pack of 50)

  • Compact 5 x 20 mm Fuse holder Terminal Block used in control circuit applications.
  • Low Cost alternative fuse holder terminal block.
  • Includes 24 VDC Blown Fuse LED Indicator.
Check Stock

Sound Storm Laboratories AKS8 8 Gauge Car Audio Amplifier Amp Complete Kit Wiring Installation with Install Wire Cables and RCA Interconnect

  • 17' 8-Gauge Red Power Cable, 3' 8-Gauge Black Ground Cable.
  • 16' 18-Gauge Blue Turn-on Wire, 20' Speaker Wire, Rubber Grommets x 2.
  • 16' High Performance RCA Interconnect, 6' Split Loom Tubing.
  • Competition High-Quality Fuse Holder, 5 / 16" Gold-Plated Ring Terminal.
  • 4" Wire Ties x 7, #10 Gold-Plated Ring Terminal, 1 / 4" Gold-Plated Ring Terminal.
Check Stock

BAZOOKA BTA10250D BT Series Class D Amplified Tube Subwoofer (10")

  • 240W car subwoofer with 8 gauge amp wiring kit for everything you need to achieve a premium sound in your car.
  • Fits into any space and features a butyl rubber surround, built-in amplifier, and vented enclosure design to increase bass output.
  • Comes with mounting straps and wired bass control.
  • Aviation grade carpet is durable and neutral color for use with all interiors.
  • Includes 17-foot 8-gauge red power cable, competition high-quality fuse holder, 3 feet of 8-gauge black ground cable, 16 feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect.
  • Also includes 20 feet of speaker wire, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 gold-plated ring terminal, a 5/16-inch gold-plated ring terminal, and a 1/4-inch gold-plated ring terminal.
Check Stock

Make Me Yours (Billionaire's Sub Book 2)

  • ... AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Scosche Install Centric ICAK8 True 8 Gauge Hybrid OFC 2-Channel High Current Amplifier Wiring Kit Complete Car Amp Kit Twisted Pair Audio Cables In-Line Fuse Holder

  • HYBRID OFC POWER CABLE: This is a True 8 Gauge Oxygen-Free Copper and Copper-Clad Aluminum Hybrid Power Cable. Our kit features a blend of heavy-duty....
  • IN-LINE FUSE HOLDER: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and....
  • DOUBLE STRENGTH GROUND TERMINAL: The Double Strength Ground Terminal is a unique pre-terminated ground terminal design that dramatically simplifies....
  • TWISTED PAIR AUDIO CABLES: The twisted pair RCA cables reject noise to provide better sound performance through your amplifiers. Our kit is....
  • BUY WITH CONFIDENCE: This product is backed by Scosche's Lifetime Tech Support and a Limited Lifetime Warranty, so you can purchase this product with....
Check Stock

Boss Audio Armor AR3000D 3000-Watt Car Amplifier and 4GAMPKIT-SFLEX Q Power Super Flex 4-Gauge 3000-Watt Amplifier Car Audio Installation Kit

  • AMPLIFIER: RMS Power: 1200 Watt x 1 Channel @ 4 Ohm.
  • Max Power: 2200 Watt x 1 Channel @ 2 Ohm.
  • Dimensions: 6.5" W x 2.625" H x 13 5/16"L.
  • AMPLIFIER KIT: Handles up to 3000 watts of power.
  • Ready for complete amplifier installation.
  • KIT INCLUDES: Deluxe high quality fuse holder.
  • 17 feet of 4 gauge Super Flex orange power cable.
  • 3 feet of 4 gauge Super Flex blue power cable.
  • 25 feet of 16 gauge Super Flex speaker wire.
  • KIT SPECIFICATIONS: Dimensions: 13 x 8 x 3 inches.
Check Stock

Recoil True 4 Gauge Complete CCA Amplifier Wiring Kits with OFC RCA Cable

  • Complete 4 Gauge 2-Channel Amplifier Installation Kits.
  • 17ft (5.5 meters) Oxygen Free Copper 2-Channel Helical twisted construction RCA interconnect cable. 17ft (5.5 meters) Premium Frosted Blue 4 Gauge power wire with ring terminal provides optimal power transfer.
  • 3ft (.95 meters) Premium Frosted Black 4 Gauge ground wire with ring terminal. 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
  • 25ft (8.0 meters) Premium Frosted Blue/Black 16 Gauge speaker wire. One Recoil ANL/Mini-ANL Fuse-holder with 120A ANL fuse offers ideal protection for high powered systems.
  • One Black rubber firewall grommet. Four 4 Gauge Nickel Plated Ring terminals with blue/black boots. Five 18 Gauge Spade terminals with blue/black boots. One Red 18 Gauge butt connector. Ten 6” Black zip ties.
Check Stock

HDMI Solderless Signals Terminal,Gelrhonr Gold Plated HDMI Free Welding Connector Breakout Board with Breakout Plastic Cover,Screwdriver

  • ✪ HDMI Solderless Signals Terminal:No soldering needed! All signal ports is printed with wire number on both sides of the board for quick wiring,which is really nice because we sometimes forgetting the sequence..
  • ✪ HDMI adapter signals terminal is equipped with a crimping ringof tail pipe. Make sure that the cable is pulled in use without causing dropped wires or poor contact.Suitable for the cable up to 10mm.
  • ✪ The breakout board comes already installed in a plastic hood enclosure with a openable cover.For a wire holder for fixing cable and avoiding twisting.Snap-on construction that opens and closes easily and is sturdy and secure after closing..
  • ✪ Compact design and reliable connection, solderless type, Adopt environmentally friendly insulated terminal block.JRequires only a screwdriver and a wire stripper to terminate HDMI cables, slide in your stranded or solid-core wire, and re-tighten..
  • ✪ Little tips：Due to the different manufacturers,so the most HDMI have varying wiring plans.The actual wiring could be different depending on your equipment.（You can use the multimeter test to connect this HDMI solderless soldering head）If only one end needs to be changed, please apply the same wiring structure that was in use..
Check Stock

ANL Fuse Holder+2 pcs of 200A Fuses+4pcs of 1/0 AWG Cable Ring Terminal Lugs 5/16'+4 pcs Terminal insulators All-in- One Pack (200A)

  • Selling by package: ANL Fuse holder*1+ ANL fuse*2+0 Awg wire ring terminal lugs*4+ terminal Lug insulators*4 ..
  • 200A ANL fuse one for installation and one for spare part..
  • 4 pcs 0 AWG cable terminals lugs and 4 insulators convenient for your installation..
  • Heat resistant plastic base with fixing holes on ends..
  • Metal materials: Zinc alloy Nickel plated with screw nuts and washers..
Check Stock