Reviews Higher Viscosity Index

Mobil 1 0W-40, Engine Oil, 1 qt.

  • Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
  • Flash Point: 230 Degrees C Country of Origin (subject to change): United States.
Check Stock

Valvoline, All Fleet Plus, 15W40, 1 Qt

  • Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
  • Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.
Check Stock

AmScope ML-A-1 Microscope Immersion Oil 1 Oz Type A

  • Ultra-low viscosity immersion oil for all microscopes, Type A (150 cSt).
Check Stock

Motul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles

  • Advanced Technosynthese lubricant for High Performance/Protection.
  • Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
  • Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
  • Can be mixed with synthetic/mineral oils..
  • Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..
Check Stock

LET S RESIN UV Resin with Light,Upgraded 200g Crystal Clear&Low Odor UV Resin Kit,36W UV Light,Silicone Mat,Ultraviolet Epoxy Resin Hard,UV Resin Starter Kit for Jewelry,Craft Decor

  • Low Odor&Hardness: LET'S RESIN upgrade UV resin is developed and produced safely, using high-quality non-toxic materials, after long testing and....
  • More Efficient Tools: Comparing many UV lights, we selected this 36W UV lamp to improve your work efficiency, the higher the power, the shorter the....
  • High Viscosity: LET'S RESIN well-tailored UV resin kit formulation and perfect photoinitiator ratio to help you achieve the best curing effect during....
  • Crystal Clear&Anti-yellowing: LET'S RESIN UV resin hard is added with antioxidants. The refractive index material is more than 1.5times higher, making....
  • Operation Tips: ① Store in a cool place. ②Before use, try a small amount to master the skills and techniques. ③The surface must be kept clean....
Check Stock

Epoxy Resin Kit, Crystal Clear Deep Pour Epoxy Resin for River Tables, Live Edge and Wood Filler, ¾ Gallon Clear Casting Pourable Epoxy Resin(2:1 Mix Ratio)

  • 【Crystal Clear & High Gloss】JDiction Self-Leveling Epoxy Resin has a thinner viscosity with bubble releasing attributes, This feature allows you to reduce the trouble with bubbles in the production process.
  • High gloss formula cures a perfect crystal clear finish..
  • 【Deep Pour Epoxy Resin Up To 2 Inch】Able to fill gaps more than 2 inches thick at a time.
  • Specially researched and developed for art projects, such as river bed, movable table side, and deep pouring.
  • Very suitable for various DIY resin art, coating bars, counter tops, jewelry, and tumblers..
  • 【2:1 Mixture Resin & Higher Hardness】Mix resin according to the volume ratio, the ratio of resin A to resin B is 2:1.
  • After curing, the hardness of this resin is higher, and the hardness index can reach above 80D.
  • it is more wear-resistant and not easy to break..
  • 【Perfect Match with Various Colors】It is perfectly mixed with colorants and mica powder and other pigments.
  • used with wood and molds to produce more gorgeous epoxy resin art works..
  • 【Serve With Heart】Our team is committed to fast response and multi....
Check Stock

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

  • Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
  • Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
  • Glass Transition Temp (Tg), ultimate 102°C.
  • cure time 24 hrs At 25°C, 1-2 hrs At 65°C.
Check Stock

OEMTOOLS 24399 Vacuum Pump Oil, 8 oz, Hydrotreated, 8oz Vacuum Oil Change Tool Accessory, Widely Compatible for Fluid Pump, Automotive, Electrical, and Mechanical Systems

  • Premium: Extremely high quality, hydrotreated vacuum pump oil.
  • Engineered to maintain viscosity even in extreme temperatures.
  • Essential: Don't damage your equipment with substitute oils.
  • Your vacuum extractor depends on regular service and the quality and purity of your vacuum pump oil.
  • Clean: Used oil contains contaminants like moisture, acids, vapors, and dirt.
  • Vacuum pump oil should be changed after each use to improve performance and the life of the pump.
  • Universal: This mechanical lubricant is compatible with pumps made by most manufacturers.
  • Specifications: 225 Viscosity SUS at 100 degrees Fahrenheit.
Check Stock

Testor Corp 3527C Non-Toxic Cement w/Applicator 1oz

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check Stock

LET'S RESIN UV Resin with Light,Upgraded 200g Crystal Clear&Low Odor UV Resin Kit,UV Light,Silicone Mat,Ultraviolet Epoxy Resin Hard,UV Resin Starter Kit for Jewelry,Craft Decor

  • ..., which can fully Irradiate your crafts. Press once, it turns off after 60s, long press for 3s, and turns off after 120s. We are also equipped with mixing tools and a silicone mat. They can help you keep the desktop clean during operation, and can mix a variety of colors to create more unique UV resin works..
  • High Viscosity: LET'S RESIN well-tailored UV resin kit formulation and perfect photoinitiator ratio to help you achieve the best curing effect during production. And add acrylic adhesive,so that clear UV resin has high adhesiveness,viscosity up to 3700mpa·s,can bond various materials,such as glass decoration,crystal crafts,can also use UV glue to draw 3D paintings,use Make bubble texture on the tumbler cup,resin UV provides you with more creative space to create beautiful and dazzling works!.
  • Crystal Clear&Anti-yellowing: LET'S RESIN UV resin hard is added with antioxidants. The refractive index material is more than 1.5times higher, making the finished work more transparent and yellow-resistant than other UV epoxy resin. Apply without leaving traces, suitable for any light-transmitting material. The UV Resin is also great for making vaults, seals, and tiny delicate landscape DIY work like ocean waves, water splashes, wine more astonishin....
Check Stock

AA-Bond FDA22 FDA Medical Grade Epoxy Adhesive Two Part Room Temp Cure 5gm kit

  • Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
  • Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
  • Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
  • Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
  • Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.
Check Stock

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..
Check Stock

Quicksilver 20W-50 Full Synthetic Motorcycle Oil – 1 Gallon

  • NO COMPROMISE FORMULATION – Ours is a state-of-the-art formulation, built for performance. Synthetic ester base oils, built-in friction modifiers, and outstanding viscosity stability under high thermal stress and high RPM..
  • HIGHLY OXIDATION STABLE – Protects the engine from oil thickening, high-temperature sludge, and varnish deposits. SHEAR STABLE HIGH VI INDEX – Improver-protects against viscosity breakdown in severe service and racing conditions..
  • VERY HIGH WEAR PROTECTION – Anti-wear agents and built-in friction modifiers effectively protect cam lobes and other highly loaded parts from wear, including chains and clutches. Excellent performance and high wear protection in high temp engines such as the V-TWIN.
  • Exceed FZG Load Stage 12 – ULTRA FAST GEAR CHANGES – Exceptional gear changes and clutch engagement, facilitates rapid gear changes in all conditions..
  • UNIVERSAL FORMULATION – Fits a wide range of small 4T engines – Motorcycles, scooters, off-road dirt bikes, etc. FULL WARRANTY – Meets and exceeds all Japanese OEM warranty requirements..
Check Stock