Reviews Guitar Assemblies

(5 Pack) Standard Threaded Brass Bowls - Lighting Fixture Spare Parts - Standard Decorative Bowls

  • For use with Standard Size Deacon Smith Lighting Fixture Assemblies and Spare Partsi.
  • Standard 1/8 IP Threads for use on most lighting fixtures and some assemblies.
  • Brass Spare Parts for Deacon Smith Assemblies.
  • Compatible with Deacon Smith Standard Conduit Downstems and Standard Decorative Parts.
Check Stock

Delphi FG1371 Fuel Module

  • Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation.
  • Where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge.
  • Delphi fuel pump assemblies are built with OE-validated parts and include OEM-grade wiring, electrical connectors and level sensor assemblies that deliver increased performance, durability and reliability over other aftermarket fuel pumps.
Check Stock

LMR-400/LMR400 Times Microwave Low Loss Coaxial Cable - PL259 UHF Male to UHF Male Connectors 50 Feet-CB Ham Radio Antenna - Made in The USA by Cable Assemblies Now

  • All Cable Assemblies Now Inc cable assemblies are MADE IN THE USA - we pride ourselves in making sure we provide all of our customers with the best quality product made with the highest quality materials.
  • WARRANTY on ALL Cable Assemblies made and mfg by Cable Assemblies Now Inc. have a limited 10 year warranty - Please do not hesitate to contact us for any questions or concerns.
  • We can guarantee that any cable under 1000MHz will have a Standing wave ratio plot of 1.25:1 at any frequency under 1000 MHz - We can also test return loss, insertion loss, phase angle, and use a Vector Network Analyzer to measure for both match and resonance..
Check Stock

iJDMTOY (2 Universal Sealed Rubber Housing Caps Compatible With Headlight Install Xenon Headlight Kit, LED Headlights Bulbs, Aftermarket Headlamp Retrofit, etc

  • This listing is for (2) universal sealed rubber housing caps.
  • Good for xenon LED conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
Check Stock

25 Foot - Guitar Bass Instrument Cable Custom Made by WORLDS BEST CABLES – Using Mogami 2524 Wire and Neutrik NP2RX-AU-SILENT & Neutrik NP2X-B ¼ Inch (6.35mm) TS Plugs

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2524 wire and Neutrik NP2RX-AU-SILENT & Neutrik NP2X-B Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • NP2RX-AU-SILENT by Neutrik AG-Liechtenstein is a ¼” Gold plated Silent Plug uses hermetically sealed switching contacts to quietly switch the instruments under load, thereby avoiding annoying thumps, pops and squeals. ATTN: For use with instrument (guitar) applications only. Damage may occur if connected to amplifier output. Please note that the signal isn't muted with some types of active electric guitars which are equipped with tip-ring-sleeve jacks that tap to activate the guita....
Check Stock

OTC 5285 1,650 lb. Capacity Air/Hydraulic Power Train Lift

  • OTC's 1,650 lb. capacity Powertrain Lift is perfect for handling engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
  • Scissors-type design allows access to all 4 sides of a component for supreme accessability.
  • Two independent adjusting screws tilt the table 15 degrees side-to-side, or fore and aft and can be operated manually or with a non-impact air wrench.
  • Air/hydraulic operation via a foot control pump that features a flexible hose allowing movement around lift.
  • Features a 20 x 32 inch table, 8-inch high capacity swivel casters, a minimum height of 31-1/2 inches with a 74-1/2 inch maximum height, and a footprint that is 33 inches wide x 48 inches long.
Check Stock

Aftermarket Replacement 4 Pc Set Halogen Headlights & Signal Marker Lamps Compatible with 1999-2007 Sierra Pickup Truck Replaces 15199560 15199561 15850351 15850352

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your....
Check Stock

2-Pack AR-PRO 6” x 1.5” Flat Free Solid Rubber Wheel Assemblies - Replacement Hand Truck Wheels with Ball Bearings and 1/2” Bore Hole Diameter - Heavy-Duty Solid Rubber Wheels 132 lbs Load Capacity

  • AR-PRO 6” X 1.5” FLAT FREE SOLID RUBBER WHEEL ASSEMBLIES - These sets of flat-free wheel assemblies have nominal dimensions of 6 inches (outer....
  • REPLACEMENT HAND TRUCK WHEELS WITH BALL BEARINGS AND 0.5” BOREHOLE DIAMETER - These wheel assemblies come in different sizes, but these 6-inch tires....
  • HEAVY-DUTY SOLID RUBBER WHEELS WITH 132 LBS LOAD CAPACITY - Convenient and maintenance-free, these flat-free solid rubber tires and wheel assemblies....
  • HEAVY-DUTY SOLID RUBBER WHEELS WITH 132 LBS LOAD CAPACITY - The solid metal rims and hubs also have high resistance to impact cracks, making it highly....
  • SAFE AND COMFORTABLE RIDE - Say goodbye flats without saying goodbye to a smooth and comfortable ride. AR-PRO flat-free tires provide convenience,....
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

15 Foot - Guitar Bass Instrument Cable Custom Made by WORLDS BEST CABLES – Using Mogami 2524 Wire and Neutrik NP2RX-AU-SILENT & Neutrik NP2X-B ¼ Inch (6.35mm) TS Plugs

  • This is a custom built cable assembly, made by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2524 wire and Neutrik NP2RX-AU-SILENT & Neutrik NP2X-B Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano – Japan using the best materials and technological expertise of decades of R&D..
  • NP2RX-AU-SILENT by Neutrik AG-Liechtenstein is a ¼” Gold plated Silent Plug uses hermetically sealed switching contacts to quietly switch the instruments under load, thereby avoiding annoying thumps, pops and squeals. ATTN: For use with instrument (guitar) applications only. Damage may occur if connected to amplifier output. Please note that the signal isn't muted with some types of active electric guitars which are equipped with tip-ring-sleeve jacks that tap to activate the guita....
Check Stock

New Stens Pneumatic Wheel Assembly 175-763 for Woods 19703

  • AR-PRO 4.10/3.50-4” SOLID PU Run-Flat TIRE AND WHEEL ASSEMBLIES - These tire and wheel assemblies are the perfect replacement parts for wheeled equipment with wheels that have an outer diameter of around 10 inches, rim diameter of 4 inches, and tire width of 4.10 inches..
  • 10” FLAT FREE TUBELESS TIRES AND WHEELS FOR UTILITY EQUIPMENT - Highly compatible with yard tractors, wagons, wheelbarrows, hand trucks, portable generators, dollies, trolleys, lawn mowers, and more! Convert now to more efficient and maintenance-free tire and wheel assemblies!.
  • 5/8” AXLE BOREHOLE, OFFSET HUB, AND DOUBLE-SEALED BALL BEARINGS - Don’t let the thought of replacing an entire wheel assembly deter you from enjoying the benefits of a flat-free and tubeless hand truck wheel. The wheel assembly has an axle borehole inner diameter of 5/8 inch that will universally fit on 5/8-inch axles. There are two double-sealed ball bearings on each assembly to minimize rotational friction and provide both radial and axial load support..
  • HEAVY-DUTY SOLID PU TIRE AND WHEEL ASSEMBLIES - The layered 100% premium PU ensures that the rubber tires can perform excellently under heavy-duty applications. The solid and durable construction ensures that the tires are wear, puncture, tear, an....
Check Stock

Andersen Patio Door Tandem Roller 1997061 (2 Pack)

  • 【Standard Size】Each sliding door tandem roller measures about 5/16-inch in wheel thickness (width) and 1-1/4-inch in diameter, a suitable size for replacing damaged or missing roller assemblies on sliding doors or windows..
  • 【Products Includes】2 × sliding patio door rollers, widely used for replacing damaged or missing roller assemblies on sliding patio doors, enough quantity for using in different doors at one time..
  • 【Solid & Durable Construction】The sliding door roller wheel is made of high quality material, stable and not easy to break, safe and reliable. High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG..
  • 【Easy to Install】This steel ball bearing roller is widely used to replace damaged or missing tandem roller assemblies in patio sliding glass doors, can be installed fast and effortlessly without extra tools..
  • 【Wide Application】The sliding door roller can be used on wood, extruded aluminum, vinyl patio doors, sliding glass door, screen door, sliding gate, window, vinyl patio doors, closet and more, is an indispensable accessory in daily life..
Check Stock

Prime-Line N 7533 Sliding Closet Door Roller Kit 3/4 inch Wheel Diameter Convex Round Edge Plastic Stamped Steel Construction Includes 3/8inch and 1/2inch Offset Pairs 2Front and 2Back Rollers

  • Roller assemblies for use with top hung, by-passing sliding wardrobe doors.
  • Features a 3/4 in. diameter wheel with convex (round) edge.
  • Two roller assemblies feature 3/8 in. offset for use on front panel.
  • Two roller assemblies feature 1/2 in. offset for rear hanging panel.
Check Stock