Reviews Ground Vise

FRICTIONWORKS Made in USA 4' Professional Grade Soft Jaw Pads/ Covers for Bench Vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

  • MADE IN USA - The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, moving, or falling off the vise.
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets - 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise.
  • UNIQUE MAGNET RETENTION SYSTEM - Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws.
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU. For high-torque applications see or SH80 jaws..
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  • PROTECTIVE SURFACE – Specially textured surface won't mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.
  • TIGHT TOLERANCES - true flat surfaces, angles, and dimensions reduces wobble and improves fi....
Check Stock

DBM IMPORTS High Precision 8 Jaw Wire Cut EDM Vise HRC 55 .0002 Toolmaker Stainless Steel Hardened Grinding Milling

  • Stainless Steel High Precision 8" Wire Cut Vise.
  • Parellelism and squareness within .0002".
  • Precision ground and hardened throughout.
  • Made of stainless steel to resist erosion.
  • Case Overall dimension: 13-1/2''L x 6''W x 3''H.
Check Stock

3 / 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS

  • 3"/ 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS.
  • WORM: GEAR RATIO - 1: 36, WHICH MEANS THAT 1 COMPLETE HANDLE ROTATION TURNS THE TABLE BY 10 DEGREE.
  • ROTARY BASE DIMENSIONS: 4-1/8" x 3-1/4" (4 x T-Slots: 5/16"). HORIZONTAL HEIGHT OF ASSEMBLY IS 75 MM (* REFER PICTURE). CAN BE MOUNTED HORIZONTALLY &....
  • COMES WITH 80 MM CASTE IRON QUALITY ROUND VICE/ VISE WITH FIXING NUTS BOLTS. PRECISELY GROUND. MOVING JAWS HAVE VERTICAL 7 HORIZONTAL VEE GROVE TO....
  • VICE IS DRILLED (M6) IN A MANNER THAT IT WILL FIT BOTH TO A 3 AS WELL AS 4 SLOT TABLE..
Check Stock

Wicked Edge Pro-Pack III with Hard Carrying Case, WE130PR18024

  • MADE IN THE USA. Sharpens a very wide assortment of knives - offers the most versatility. Generation 3 Cam-Lock Vise - one-step knife clamping and doesn't require additional tools to operate..
  • INCULDES: - Coarse 100 Grit / Medium Coarse 200 Grit Diamond Stones Pack. - Medium Fine 400 Grit / Fine 600 Grit Diamond Stones Pack..
  • WIDEST RANGE OF CUSTOMIZABLE ANGLES. Ability to adjust angles independently for asymmetrical grinds. Clamps the widest variety of knife grinds, including blades that are full-flat-ground or distally tapered..
  • CAN SHARPEN BLADES UP TO 15" LONG. Angle Range: 13 to 35 Degrees ( 26 to 70 degrees inclusive). Main angle adjustment in 1 degree increments, and micro-angle adjustment in 0.05 degree increments. Sharpener's angle markings are calibrated for knife's edge at 5/8" over top of vise..
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

GYZJ 6" Cross Slide Vise Drill Press Milling Vise, 6 in Jaw Width , 6.1 in Max Jaw Opening, Bench Mount Clamp Machine Vice Holder Clamping Tool for CNC Woodworking Milling Machine Drill Press

  • [Premium Quality Structure ]- The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Strong clamping force, not easy to move, operated simply..
  • [Smooth Guide Rail] - The guide rail surface is finely ground, and the parallelism is 0.1mm, very smooth and flat.The contact with the parts could be more precise, and the movement is smooth without jamming..
  • [Powerful Clamping Force] - The mill vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 29 KN, Jaw width: 6", Max Jaw opening: 6.1"..
  • [Flexible Handle]-The handle rotates naturally and smoothly. Pursue precision in production process, which made the contact surface finely polished, reduces the jam during use greatly and the vise jaw can be easily adjusted..
  • [Wide Application] - Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 4\ - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 4" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly.
  • Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
  • Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your tabl....
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock