JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products
- Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
- Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
- Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
- 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check StockSWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set
- These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
- Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
- This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
- This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
- These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock7' Front Vise Woodworking Bench Vise Cast Iron Front Screw Vise Woodworking Front Vise Wood Vise
- Well Built Quality - Our Front Vise made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate,and durable to use..
- Professional Design - This Front Screw Vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
- Dimension - 1-3/16" diameter x 15-1/2" Length screw，3/4" diameter guide Rods and 10-1/4" width x 19-1/4" Length vise.
- Easy to Work - Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
- Widely Used - Useful for woodworking, engineering and welding. Slots in base plate so you can fix the vice to a work table or machine table..
Check Stock
Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool
- ...tible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
- Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
- Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
- 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock
Riverruns Fly Tying Vise
- ...an for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
- This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
- The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
- Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
- Free Aventik Fly Tying Vise Racks in two popular colors, Grey and Black. Made of Styrofoam 15PA, high density with hook rust inhibition,....
Check Stock
Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle
- Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
- Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
- Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
- Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
- Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check StockEclipse Professional Tools Quick Release Woodworking Vise, Gray Cast Iron, 10" Size
- Quick release trigger allows you to quickly adjust the opening to either release or clamp a piece you’re working on.
- Fitted with an adjustable front stop (dog) to provide a normal vise and a tail vise in one tool.
- Vise comes with two predrilled holes for quick sturdy mounting to your workbench.
- To increase safety, the fused tommy bar will bend before the vise can become over-stressed.
- Voted #1 Woodworking Vise as seen on Wiki Video.
Check Stock
Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking
- Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
- Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
- Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
- Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
- Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check StockBench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making
- 【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
- 【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
- 【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
- 【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
- 【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..
Check StockBench Vise 3' Cross Slide Vise Flat Vise Bench clamp Drill Press Vise Clamp Metal Milling Vise Cross Sliding Vise Benchtop Vise
- 【Size】Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient.The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm..
- 【Industrial Strength】With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.With high-strength accuracy screw, the bench vise is not easy to slip or deform..
- 【Hand Tool with Rotating Handle 】2 rotatable handles can adjust vise front and back, bolt fixing slot can be fixed..
- 【Silicone Protection】The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation..
- 【Easy to Use】The vise can be used with drill stand and bench drill, etc. Vise is suitable for woodworking and metal processing..
Check Stock
Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue
- 4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
- Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
- Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
- The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
- Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
- Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.
Check StockWSD Ski Snowboard Vise Tuning Vise Ski Snowboard Tune Vise Set Pair Red New
- Ski Snowboard Vise Tuning Vise Ski Snowboard Tune vise set Pair Red New new release for this season.great for waxing bases and tuning edges! Ski and....
- Great dual purpose vise- holds wide skis and snowboards securely while tuning. Sturdy for tuning yet lightweight. Ski/snowboard vises are pretty....
- Super tough and durable - Universal works with most skis and snowboards. Simple design best price . Features 2 side edge positions a standard 90' and....
- Universal works with most skis and snowboards. Designed to hold any skis and Snowboards . Binding clearance of 160mm. 2 side edge positions- standard....
Check Stock
Double Ended Pin Vise Model Hand Drill Set with 10 pcs Micro Twist Drill Bits Set for PCB Handicraft Jewelry Watch Making
- 100% brand new and high quality,This pin vise chuck is adopted of brass material, processed by electroplating, beautiful and durable in use Double ended pin vise design,.
- Adjustable Pin Vise is the largest and most robust pin vise in our line up of tools.
- use it in both commerical and home applications ,Pin vice is useful for electronic assembling, tool-making, model making and hobbies,2 chucks,holding size from 0. 5 mm to 3.2 mm Suitable for PCB, handicraft, jewelry, watch making etc.not suitable for steel, iron stone, stone and other hard objects..
- Holds small drills, deburrers, wires, files, reamers and other small tools that can be difficult to hold while working,Hexagonal heads on both sidesCan be used as hand drill.
- Drill pin vise has a 3-jaw hardened steel keyless chuck and sturdy plastic handle that is ergonomic and easy to hold ,Compact size is perfect to go in a toolbox or in a pocket.
- This product contains a double ended pin vise chuck, and 10 pcs different sizes twist drill bit, convenient for your diy project.
Check Stock
