Reviews Grip Range 0 313 0 437

Interstate Pneumatics H8-KIT Heavy-Duty Bench Crimper (H8) with Ferrules (50pk) 0.625' ID x 1' & 0.656' ID x 1'

  • Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands.
  • Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67".
  • 1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation.
  • F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
  • F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
Check Stock

100 Qty 304 Stainless Steel Blind Rivets #4-6 1/8 Diameter x 3/8 Grip BCP166

  • #4-6 (1/8" Diameter, 0.313 - 0.375 Grip).
Check Stock

100 Qty 304 Stainless Steel Blind Rivets #6-6 3/16 Diameter x 3/8 Grip BCP179

  • #6-6 (3/16" Diameter, 0.313 - 0.375 Grip).
Check Stock

MaximalPower Replacement Vacuum Filter for Eureka DCF-10 DCF-14 Lightweight Upright Vacuum Cleaner Pleated Hepa

  • New MaximalPowerTM brand vacuum filter. Washable & Reusable.
  • quality guaranteed.100% Compatible with original manufacturer equipments..
  • great for allergy sufferers. Traps Microscopic Particles & Allergens..
  • Works in the following vacuums:Eureka Lightweight Upright Vacuums: Style Model Numbers Optima 430 series, including 430, 431a, 431ax, 431axz, 431b, 431bx, 431f, 433a, 433b, 433be, 433bet, 437, 437axz, 437az, 439az, 437AZ, 437AZE, 437-AXZ, 437-AZ, 437-AZE, 431A, 431AE, 431AXZE, UK431A Optima Pet Lover 439AZ.
  • Replaces the following OEM Part #s: 62396, 62396-1, 62396-12, 73734-2, 73734, 2316911737, 023169117372, 73824, 62731, 62731A, 62731B, DCF-10, DCF-14, DCF10, DCF14, 62731-1, 62731-12, 470953, 62731A-2, 62417, 62731B-Z, and many more..
  • HEPA filtration systems trap and seal-in 100% of dust mites, pollens, ragweed, mold spurs, microscopic particles, bacteria, dust mites, germs as small as 0.1 micron and other allergy causing agents.
Check Stock

DOTOOL HVLP Touch Up Air Spray Gun with 0.8mm Stainless Steel Nozzle Composite Paint Sprayer Spot Repair Set up for Auto Paint Primer Topcoat Panel Repairs, Door jambs, Difficult-to-Reach Areas, 125cc

  • 【Spray Gun Filter】High quality stainless steel filter, size: 10cm/3.94 “, corrosion resistant, compression resistant, uniform mesh, no broken hole, no twisted wire, universal..
  • 【Easy to Install】First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the protective seat and rotate to complete the installation, time saving and labor saving for your project..
  • 【Airless Sprayer Tips】These paint sprayer tips are compatible with most airless paint sprayers, and 211, 313, 415, 517, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.017 inches, 0.021 inches, and the spray range is 4 to 14 inches..
  • 【Widely Application】Suitable for most mainstream airless sprayers guns, suitable for painting, furniture, fences, home decor, industrial fine painting and decoration, etc..
  • 【Package Includes】5 Pieces airless sprayer tips and tip seal in 5 sizes(211, 313, 415, 517, 623), 5 pieces spray gun filter replace for airless spray paint machine. Sufficient quantity and different sizes to meet your different needs..
Check Stock

Monoprice - 133870 MP Select PLA Plus+ Premium 3D Filament 1.75mm 1kg/Spool Blue

  • PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution..
  • It does not require a heated base and has a very low shrinkage rate (0.3 percent)..
  • This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm..
  • It has a nominal processing temperature range of 205 ~ 225 degree C (401 ~ 437 degree F)..
  • Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament..
Check Stock

Set of 8 Magnets for Metal/Magnetic Hoop - Brother Babylock Pfaff Viking Embroidery Machines - Magnet Magnets

  • 8 Magnets for Use with the Metal/Magnetic Hoops Will work with the following Embroidex Hoop Models Brother: SA431 (SA308H) SA432 (SA311H) SA434 (SA314H) SA437 (SA309H) SA438 (SA312H) SA439.
  • Brother: SA431 (SA308H) SA432 (SA311H) SA434 (SA314H) SA437 (SA309H) SA438 (SA312H) SA439 (SA315H) SA442 (SA307H) SA443 (SA310H) SA444 (SA313H) Pfaff/Viking PA006 (VK006M) PA116 (VK116M) PA202 (VK202M) PA889 (VK889M) PA940 (VK940M).
Check Stock

ISPINNER 140pcs 4 Sizes Aluminum Blind Rivets, Pop Rivets Assortment Kit (1/8\ 5/32\ 3/16\ 1/4\) x 1/2\ (Silver)

  • #6-6 (3/16" Diameter, 0. 313 - 0. 375 Grip).
Check Stock

5 Pieces Spray Tips Reversible Spray Tip Airless Spray Nozzles for Airless Paint Spray Guns and Airless Sprayer Spraying Machine (211, 313, 415, 517, 623)

  • Nice Compatibility: these paint sprayer tips are compatible with most airless paint sprayers, and 211, 313, 415, 517, 623 correspond to the nozzle diameters of 0.011 inches, 0.013 inches, 0.015 inches, 0.017 inches, 0.023 inches, and the spray range is 4 to 14 inches.
  • Considerate Combination: you will get 5 airless sprayer spraying machine parts of different sizes, namely 211, 313, 415, 517, 623.
  • Each is equipped with an airless nozzle and a nozzle seal.
  • Different model combinations can better meet your different needs.
  • Broad Utilization: spray tips with a variety of models to choose from to meet your different use needs, such as paint, furniture, fences, home decoration, industrial fine paint and decoration and so on.
  • Also they are applicable for various surfaces and materials, such as industrial enamel, varnish, water based paint, internal and external wall latex paint, fireproof coating.
  • Easy Installation: no tools are required to install, and airless spray nozzle can be easily installed on the spray gun in a few simple steps.
  • First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the protective seat and rotate to complete the installation, time saving and labor saving for your project.
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

HongBoW Hardware Brass Pipe Fitting Adapter Reducer 1/16 NPT Male x 1/8 NPT Female npt Pipe Adapter

  • American National Standard Taper Pipe Thread (NPT) on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
Check Stock

JEGS Valve Spring Shim Kit | 1.437” OD / 0.645” ID | Made In USA | Includes 3 Sets Of 16 Shims

  • KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
  • CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
  • MADE IN USA with high quality materials and assembly.
  • EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check Stock

Monoprice PLA Plus+ Premium 3D Filament - Black - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers (115833)

  • PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution..
  • This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm..
  • It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F)..
  • Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament..
  • The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat..
Check Stock