Reviews Gray Iron Ductile

Wilton 676U Utility Bench Vise, 6-1/2” Jaw Width, 6' Jaw Opening (28820)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • DURABLE FINISH: Powder coat paint resists scratches..
Check Stock

Wilton 674U Utility Bench Vise, 4-1/2' Jaw Width, 4' Jaw Opening (28818)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • DURABLE FINISH: Powder coat paint resists scratches..
Check Stock

Wilton 648UHD Utility HD Bench Vise 8 Jaw Width 8-1/2 Jaw Opening 28816

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • TOUGH DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

Wilton 656UHD Utility HD Bench Vise, 6-1/2\ Jaw Width, 6-1/4\ Jaw Opening (28815)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • TOUGH DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

Wilton 450P Multi-Purpose Bench Vise, 4-1/2' Jaw Width, 4' Jaw Opening (28844)

  • 360° ROTATING HEAD: Clamp materials at any angle..
  • QUICK SETUP: Indexed at 30° increments..
  • VERTICAL HOLDING: V-jaw easily holds round stock vertically..
  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • BUILT-IN PIPE JAWS: Holds 1/4" to 1-11/16" sizes..
  • ULTIMATE DURABILITY: Body and movable jaws are 30,000 PSI gray cast iron, and the base is 60,000 PSI ductile iron..
Check Stock

Wilton 1765XC Tradesman Bench Vise 6-1/2 Jaw Width 6 Jaw Opening 28842

  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out, for a lifetime of smooth operation..
  • LARGE ANVIL: Designed to take a beating while forming and shaping materials..
  • STURDY CONSTRUCTION: 60,000 PSI ductile iron body is virtually indestructible, with 2X the strength of gray cast iron..
  • IDEAL POSITIONING: 360° swivel base with double lockdowns..
  • REVERSIBLE JAW INSERTS: Serrated on one side for extra grip, and smooth on the other side to prevent marring on softer surfaces..
Check Stock

Wilton 1755XC Tradesman Bench Vise, 5-1/2' Jaw Width, 5' Jaw Opening (28841)

  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out, for a lifetime of smooth operation..
  • LARGE ANVIL: Designed to take a beating while forming and shaping materials..
  • STURDY CONSTRUCTION: 60,000 PSI ductile iron body is virtually indestructible, with 2X the strength of gray cast iron..
  • IDEAL POSITIONING: 360° swivel base with double lockdowns..
  • REVERSIBLE JAW INSERTS: Serrated on one side for extra grip, and smooth on the other side to prevent marring on softer surfaces..
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Yeshfit 1/8 Dia,Micro Solid Tungsten Carbide Coated Tip Twist Drill Bits for Stainless Steel,Hardened Steel CNC Metal Drilling (1/8x2, for Steel)

  • long tool life and faster cutting speeds,and used in high temperature drilling applications.
  • Suitable for carbon steel, chilled cast iron,ductile iron, gray cast iron,die steel, heat resistant alloy steel,tool steel..
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock