Reviews Gold Capacitor

MTX TNE212D 12 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure Boss 1100W Mono A/B Amplifier Wiring Kit and Capacitor

  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub....
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
  • CAR AMPLIFIER: Boss Audio Riot Monoblock A/B MOSFET power Amplifier delivers peak power of 1100 watts, RMS power of 825 watts.
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
  • POWER CAPACITOR: 2 Farad 20V LED Digital Voltage Car Audio Power Capacitor.
  • Capacitance: 2 farad, 2 million microfarad.
Check Stock

HONEYTEK A6243L Digital Inductance Meter Electronic Capacitance Tester Inductance/Capacitor Test Table

  • 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA.
  • compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty.
  • 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components.
  • 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test.
  • Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds.
  • Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters.
  • 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit.
  • 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable.
  • Non polarity dependent test probe, eliminates the need for polarity checking.
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity level..
Check Stock

BOSS Audio CAP8 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor and QPower 0 Gauge 3000 Watt Car Amplifier Wiring Installation Kit

  • POWER CAPACITOR: 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor.
  • High-Level Input Surge Voltage: 20 Volts.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • DIGITAL DISPLAY: Blue LED digital illuminated display window.
  • SPECIFICATIONS: Equivalent Series Resistance (ESR): 0.0015 Ohms @ 120 Hz @ 25 Degrees C.
  • Capacitance: 8 Farad, 8000000 Microfarad.
  • WIRING KIT: Deluxe High Quality Fuse Holder.
Check Stock

Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY

  • ...audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
  • available to add an external Shutdown (SD: the chip....
Check Stock

BOSS CAP18 18 Farad Digital Car Audio Capacitor Cap Digital and 4GAMPKIT-SFLEX Q Power Super Flex 3000W Amplifier Installation Kit

  • CAPACITOR: E.S.R (Equivalent Series Resistance) 0.0015 Ohms @ 120Hz.
  • 3 Digit Blue Voltage Meter Displays 0.1V Increments.
  • QUALITIES: Blue illuminated window with music response.
  • Warning Tones for Reverse Polarity Connection, Over Voltage and Low Battery Voltage.
  • CAPACITOR SPECIFICATIONS: Dimensions: 11" (L) x 6 1/2" (W) x 3" (H).
  • AMPLIFIER KIT: Handles up to 3000 watts of power.
  • Ready for complete amplifier installation.
  • KIT INCLUDES: Deluxe high quality fuse holder.
  • 17 feet of 4 gauge Super Flex orange power cable.
Check Stock

Treedix 5 pcs Prototype Shield Board Compatible with Arduino Mega 2560 Solderable Universal BreadBoard PCB Double Sided Tinned Gold Plated Holes

  • Perfect for Arduino mega sized base board and other programming boards.
  • Convenient for the prototypes and circuit design experiment and other DIY projects..
  • Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
  • Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
  • Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
  • Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..
Check Stock

Treedix 3 pcs Prototype Shield Board Solderable Universal BreadBoard PCB Double Sided Tinned Gold Plated Holes with Female Header Compatible with Arduino Mega 2560

  • The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino mega board and other programming boards..
  • Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
  • Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
  • Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
  • Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

MTX Terminator TNP212D2 1200 Watt 2 Ohm Dual 12 Subwoofers/Sub Box/Amp Package Bundle with Rockville RXC2D 2 Farad Stiffening Power Capacitor & RWK81 Amp Installation Wire Kit 3 Items

  • Package Includes: (1) MTX Terminator TNP212D2 1200 Watt Dual 12” Subwoofers. (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. (1) Rockville RXC2D 2 Farad Stiffening Power Capacitor. Features for dual subs + box: Dual Loaded 12" Subwoofer Enclosure. 2 12" Terminator Series Subwoofers Included. 1200 watts peak output. 400 watts RMS. 2" Aluminum voice coils. Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load). Rubber Surround. Polypropylene Cone.
  • MTX Logo on Dustcap. 48oz. Magnet. Frequency response: 37-150 Hz. Dual 12" Sealed Sub Enclosure. 5/8" MDF Solid Construction. Durable Black Carpeting. Stylish Logo in Carpet. Dimensions: 13.875"H x 29.625"W x 13.875" D. Amp Features: Terminator Series Class D Monoblock Car Amplifier. 400 x 1 watts peak @ 2 omhs. 200 x 1 RMS @ 2 ohms. LED power and protection indicators. Selectable bass boost (0, 6, 12 dB at 40 Hz). Mono gain control. Smart engage auto turn-on circuitry.
  • Built-in adaptive cooling fans. Built in low-pass filter (85 Hz, 18 dB/octave). CEA-2006 compliant amplifier. Frequency response: 20-85 Hz. Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H. 8 AWG power and ground leads recommended. THD at Rated RMS Power: 1%. Signal-to-Noise Ratio: 73 dB. Fuse Ratin....
Check Stock

Sealed Unit Parts MFD10 LED Display Digital Capacitori Tester

  • The Supco Capacitor Tester is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Supco Capacitor Tester provides the fastest measurements of capacitor values with one hand operation.
  • Supco MFD10 has accuracy ± 5% and range of 0.01 to 9,999 MFD.
  • The high quality Supco Capacitor Tester includes soft carying case for easy transport of device and test clips.
  • Repair your appliance with confidence when you choose Supco Capacitor Tester.
Check Stock

Capacitor 45 5 MFD 370V Dual Run Round Capacitor for Condenser Straight Cool or Heat Pump Air Conditioner

  • 45 5 / MFD 370 volt AC capacitor: round dual run capacitor.
  • Size: the dual run capacitor measures 3.88 x 2 inches/ 9.86 x 5 cm.
  • Range of temperature: the round capacitor can work from -40u2109 to 158u2109/-40u2103 to 70 u2103.
  • UL certificate: This dual run capacitor is built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
  • Note: 370 45 4 capacitor compatible with GE C3455R, 97F9895, Z97F995, 97F9895BZ3, 27L880, TRCD455, 97F9895.
  • The brand and model mentioned above is just for demonstrating capability.
Check Stock

USA Made Capacitor Oval 10 uf MFD 370 Volt 97F9002, 97F9002s (Replaces Old GE# 97F9002BZ3, Z97F9002, 27L669), 10 MFD at 370 Volts

  • Replacement Oval Run Capacitor for GE 621435.
  • Used in a wide variety of applications to keep them running at optimum performance.
  • Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
  • When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..
Check Stock