Reviews Germany Axle Brake Drum

Carlson Quality Brake Parts H2309 Rear Drum Brake Hardware Kit

  • All-In-One Kit - Includes all hold down parts and return springs necessary for a complete axle drum brake job.
  • Meets or exceeds OEM specifications, so you can be confident your drum brakes will work long after you finish the job.
  • Keeps brake shoes in proper position and returns them to proper resting state after braking.
  • Improves the life and performance of your braking system.
  • Replaces 7170, 2309, H7170 OE part numbers..
Check Stock

Lubegard 90031 Squeak Relief Brake Finishing Treatment, 2 oz.

  • Does Not Effect Braking Performance or Manufacturer’s Warranties.
  • Effective on all brake systems: disc, drum, ABS, domestic and import, Virtually eliminates customer brake squeal comebacks by providing superior noise suppression.
  • No drying time required, Waterproof and Prevents oxidation of rotors and drums.
  • Squeak Relief will not damage ABS sensors or rubber components, Helps to prevent brake surface rusting/oxidation.
  • 2 oz. can treats 6 axle sets, No ozone-depleting CFC's.
Check Stock

Complete Rear-End Bolt-On Rear Disc Brake Kit Conversion, Universal, Fits Ford 9-Inch

  • Disc brake stopping power for your Ford 9 inch or 8 inch rearend at nearly the same cost as rebuilding/replacing drum brakes.
  • Kits includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers (non-emergency brake), brake pads and hardware for increased stopping power.
  • Fits over an axle with maximum flange diameter of 6-1/4" O.D..
  • Rotors have a 2.780" center hole with both 5 on 4-1/2" and 5 on 4-3/4" bolt circles.
  • Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".
Check Stock

XUANYUDG0769 Golf Cart Brake Drum Hub Assembly for EZGO TXT PDS 1982-up Electric Cart (Not Fit Gas Models), Replace OEM# 19186G1P, Include Nut and Flat Washer, 2 Pack

  • 【Applicable Models】Golf cart brake drum hub assembly fits perfectly 1982-up EZGO Electric Vehicles, not suitable for gas models. This brake drum/hub assembly replaces Part# 19186G1P.
  • 【Durable Quality】It has a 3/4-Inch center hole with a 24-tooth star spline instead of the straight key. When replacing this brake drum, check the Hub assembly as well..
  • 【Warm Tips】Hub spline and Rear Axle Shaft Spline should be matched tightly. If one of them is wear out, both of them should be replaced at the same time, otherwise the hub spline will strip soon..
  • 【Package Included】2X EZGO TXT drum brake, 8X chrome lug nuts, 4X flat washer and 2X bolt pin, 1X instruction.
  • 【Customer Service】 XUANYUDG0769 is a professional manufacturer for golf cart accessories. We’re committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..
Check Stock

LIBRA Trailer 8 on 6.5' B.C. Hub Drum Kits with 12'x2' Electric Brakes for 7000 Lbs Axle

  • 2x Trailer 8 on 6.5" B.C hub drum kits + 2x 12"x2" electric brakes for 7000 Lbs Axle, Bolt pattern: 8 on 6.5".
  • Kit also include: 2x 25580 inner cone bearings and 2x 14125A outer cone bearings, 2x Grease seal 2.25" x 3.371" seals, 2x EZ lube grease caps with rubber plug, 16 cone wheel nuts, 1/2" - 20 thread.
  • Also include: One right + one left 12" x 2" electric brakes with 3-1/4" center hole, Works on Dexter and other brands 7000lbs axle in the market.
  • ref brake part #. K23-180-00, K23-181-00.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

One Electric Trailer Brake Assembly Dexter 10\ x 2-1/4\ Left Side

  • DRUM KITS - M-Parts Trailer Drum Kits 5 on 5.5' for 3,500 lbs Axle.
  • BOLT PATTERN - 5 on 5.5' bolt pattern brake drum with 1/2'-20 studs and bearing races installed.
  • HARDWARE - Lug nuts (1/2'-20)/ Cotter Pin, L-68149 inner bearing- (1-3/8 inch inside dimension) / L-44649 outer bearing- (1-1/16 inch inside dimension), Grease seal - (56 inch O.D - 1.72 inch I.D)/ EZ Lube Dust cap - (1.98 inch outside dimension).
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

GREHUA Rear 4' Brake Band Pin with 70'Throttle Cable Black for Azusa 2251-B Manco Bandit Critter 1492 4316 297 Rotary 484 Predator 212cc 420cc 196cc 6.5Hp Yerf-Dog Go Kart Cart Buggies Mini Bike ATV

  • FITMENT—fit for predator 212cc gx160 gx200 196cc 6.5hp 420cc Manco Oregon Rotary Yerf-Dog Kartco,Road Boss,Thunder Kart Yard Cart Go kart Dune Buggies mini bike ATV.Compatibility:fit for Manco Bandit/Critter/1492/4316/297/10366/B1SB486,Rotary 484,485,Azusa 2251/2251-B,Stens 260-141..
  • EASY TO INSTALL AND HIGH EFFICIENCY—the go kart brake band kit with simple and compact design,it is very easy to install.This brake band does not attach directly to the axle,so it would theoretically fit any size live axle.There is a hole on either end of the brake band.One end fastens to a stud mounted on the cart, but is still able to pivot,and the other end fastens to your brake rod..
  • SIMPLE AND COMPACT DESIGN—simple and compact design can effectively achieve braking effect.And it fits 4 inch Drum {outside diameter–4.2″(106.7mm)} ,4″ brake band is also called a 4-3/16″ brake band..
  • PRODUCT SIZE—brake band wide–0.98″(25mm),thickness–0.24″(6mm),outside diameter–4.44″(113mm),inside diameter–4.21″(107mm),throttle cable total length-70.86″(1800mm) ,casing length 60.43″(1535mm).
  • PACKAGE INCLUDED—1 x black brake band,1 x pin,1 x throttle cable,1 x wrench.
Check Stock

ABN Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • EASY BRAKE & BEARING REPAIR: The ABN Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs.
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles.
  • BUILT TO LAST: Heated pressure screw holds up to tough use.
  • Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion.
  • PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications.
Check Stock

Trailer 6 on 5.5' B.C. Hub Drum Kits with 12'x2' Electric Brakes for 5200-6000 Lbs Axle

  • 2x Trailer 6 on 5.5" B.C. hub drum Kits + 2x 12"x2" electric brakes for 5200-6000 Lbs Axle. Bolt pattern: 6 on 5.5".
  • Kit also include: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25" x 3.371", 2x EZ lube grease caps with rubber plug, 12 cone wheel nuts 1/2"x20 thread,.
  • Also include: One right and one left self adjusted 12" x 2" electric brakes with 3-1/4" center hole.
  • ref brake part #. K23-180-00, K23-181-00.
Check Stock

WINMAX TOOLS AUTOMOTIVE Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler (Type Hexagon)

  • EASY BRAKE & BEARING REPAIR: The WINMAX Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance.
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs.
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles.
  • BUILT TO LAST: Heated pressure screw holds up to tough use.
  • Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion.
  • PERFECT SIZE: Yoke and bolt PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applicationsare threaded 5/8-inch x 18 inches to best suit most vehicle applications.
Check Stock

LCI Lippert 3,500LB Straight Idler Trailer Axle 62HF 48SC

  • All Parts Needed to Build or Repair Your Trailer.
  • 4: 2.5k 25.25" 5 leaf Double Eye Springs.
  • 4- 15" 225/75 R15 8 ply Radial Tire and Wheel Assembly.
Check Stock

Compatible with Honda Fourtrax TRX300 TRX 300 2x4 4x4 Rear Brake Drum Cover & Backing Plate Kit

  • Aftermarket rear brake drum, cover and backing plate. Comes with axle seal and bearing..
  • Compatible with: 88-00 TRX 300 Fourtrax 2x4/4x4.
Check Stock