Reviews Gear Oil Spiral Bevel Gear

Boston Gear G486Y-G Bevel Gear, 4:1 Ratio, 0.313\ Bore, 32 Pitch, 64 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • ★[OPTIMAL PERFORMANCE]: EXAUTOPONE premium Stainless Steel Bevel Gear Set made of premium stainless steel material improves gear mesh, and with delicate workmanship, which is durable and hard, and long service life..
  • ★[GREAT APPLICATION]:EXAUTOPONE premium Stainless Steel Bevel Gear Set provides over drive for the front axle, helping to pull car climb easily. And it can guarantee to meet the original equipment..
  • ★[FITMENT]:Compatible with AR44 axles, including a 8T bevel gear and a 30T bevel gear..
  • ★[HIGH QUALITY]:EXAUTOPONE premium Stainless Steel Bevel Gear Set is 100% brand new aftermarket unit built to meet OEM specifications. easy to install and remove, ideal replacement for the old or broken one. Factory price with higher cost-effective..
  • ★[PACKAGE & WARRANTY]:Package Includes 1 Pcs X 30T/8T Stainless Steel Bevel Gear Set . Any question just contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw

  • ...th technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance.
  • Make quick, one-handed adjustments using large, rubberized levers.
  • Better fit and more control with comfortable rubber grip on handle.
  • Large cutting capacity (2-3/8″” at 90°) and bevel capacity (0°-51.5°) with positive stops at 22.5°and 45°.
  • Settings are easy to read with oversized number and ruler markings.
  • Blade wrench is attached to saw for fast and convenient blade changing.
  • Large bevel capacity with positive stops at 22.5 degrees, 45 degrees, and 51.5 degrees..
  • Oil-bath technology is created with a built-in fan and sealed-gear housing to ensure 100% oil surface coating.
  • High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears.
  • Reinforced power cord withstands jobsite abuse.
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

6HP 4 Stroke Outboard Motor Boat Engine Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System

  • 【6HP 4 STROKE OUTBOARD MOTOR】Air Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for....
  • 【MAIN PARAMETER 】Model：single cylinder、air cool、four stroke、hand pull.
  • 【PRODUCT SPECIFICATIONS】Outboard model: spline drivehard shaft、spiral bevel gear.
  • Steering: vertical axis, counterclockwise.
  • 【HIGH PERFORMANCE】Start-In-Gear protection/clutch feature prohibits prop rotation while idling. Easy pull off engine cover with push button latch....
  • 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock

FoxAlien CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • 1.Bronze bevel gear generally has better corrosion resistance, abrasion resistance, casting and excellent mechanical properties..
  • 2.This not only increases durability and longevity but even reduces noise over time..
  • 3.The straight type bronze gear is designed to used with power feed milling machine as long as the direction of the tooth is same..
  • 4.This compact bevel gear is easy to install with some small or large shim..
  • 5.The gears include bronze gear and iron gear are milled by pricing milling skill for high precision and accuracy..
Check Stock

GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)

  • 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Check Stock