Reviews Gas Flow Meters

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ... includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

Electop 10 Feet High Flow Siphon Hand Pump Manual Car Fuel Transfer Pump with Syphon Hose Tube Pipe/Control Valve/Hose Clamps for Lawn Mowers Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank

  • HIGH FLOW HAND SIPHON PUMP- Package includes 1*10ft/3 meters flexible and durable PVC transparent hose,1*high flow hand siphon pump,1*control valve,4....
  • EASY TO USE- The fuel transfer siphon pump built-in inlet and outlet valve to prevent liquid backflow during pumping. And we configured a complete 3m....
  • WIDE APPLICATION- Lightweight and portable siphon hand fuel pump, for gasoline, oil, air, water and other common liquids, ideal for emergency gas....
  • CONTROLLABLE VALVE- The controllable valve is configured to prevent backflow and direct extraction, adjust flow, on/off controllable and convenience.....
  • WARM TIPS- The liquid you want to siphon must be HIGHER than the container that flows into. The end of the input hose must be kept inside the liquid,....
Check Stock

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

  • This gas meter is connected to hose to measure unidirectional gas flow.
  • Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
  • Mainly used for detecting the flow, control flow and can be used in industry.
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

GASPRO 10FT Two Stage Propane Regulator Hose with P.O.L. and 3/8 Inch Female Flare for RV, Grill, Gas Stove, Range

  • 【Standard Connector 】Restricted Flow Soft Nose P.O.L. and Handwheel x 3/8" Female Flare. 5/16" diameter LP hose.
  • 【Well Gas Control 】Has integral first and second stages that ensure smoother and more consistent flow of propane gas to all gas appliances.
  • 【 Max BTU Flow】Providing 11" WC (1/2psi) low pressure output, with a maximum of 225,000 BTU flow.
  • 【Compatibility】Fits for RV appliance, gas grill, gas stove/range, fire pit, propane fireplace, hot water heater and more.
  • 【High Quality】 100% solid brass fitting and durable hose to provide secure connection between gas appliance and tank.
Check Stock

Eastwood Mig135 Mig175 Mig Welding Nozzle Spool Gun Replacement

  • Replacement Tweco - Style Nozzle For Proper Shielding-Gas Flow.
  • This Will Replace The Defective Unit And Assure Proper Shielding Gas Flow.
  • Replace Original Mig 135 And Mig 175 Gas Nozzle.
  • Replace Assure Proper Shielding Gas Flow.
Check Stock

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

  • Professional Ggs Flow Tester / Meter Peashooter Style.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

  • Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
  • Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
  • Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
  • Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
  • Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check Stock

Oxygen Air Flow Meter LZQ-1 1~5LPM Oxygen Carbon Dioxide Measuring Flowmeter Gauge Oxygen Gas Flow Meter

  • HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
  • PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
  • CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
  • Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..
Check Stock

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

  • ...ified by filter. Discharge clean air for diving breathing..
  • Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
  • 10-15 meters for both if connects to two hoses..
  • Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , bearing etc..
  • Application: Widely used in Kayak Dive, Hookah Dive, Long Hose Gauge Scuba Diving, Commercial Boat Cleaning, Pool Cleaning, Dive Inspection, Lobstering Diving Propeller inspection etc..
Check Stock

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

  • 【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
  • 【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
  • 【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
  • 【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
  • 【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..
Check Stock

Electric Drill Pump for Water Gasoline Oil Diesels Fluid Transfer Pump Mini Hand Self-Priming Quick Pumping Speed

  • High quality drill pump- Fine workmanship, plastic, durable and has a long service life..
  • Feature- Large flow, stable performance and high efficiency, easy installation..
  • Quick- Pumping speed is fast, can pump 20-30 L water per minute(depends on the rpm of drill)..
  • Convenient to use and store- Install all the drill chucks, you can use the electric drill to get the pump, easy and convenient to use. Compact and light weight design, portable and easy to store..
  • Flow speed- The recommended speed is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..
Check Stock