Reviews Gas And Co

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock

30 x 16g Threaded CO2 Cartridges Refills for Bike Bicycle Pump CO2 Inflator Heads - Great Refill for Mountain Or Road Bikes Tires

  • TIME SAVING & EFFORTLESS: CO2 inflators are the devices designed to inject CO2 gas (via CO2 cartridges) into your bicycle tires. Those 16g threaded CO2 cartridges are high pressure. It only takes a few seconds to release the whole bottle of gas. Also great for inflating a tubeless tire..
  • PORTABLE: CO2 cartridges are so light and compact, easy to carry around in your saddle bag, backpack, attached on bottle cage holes & under saddles (with special adaptors)..
  • PRECISELY THREADED: Well threaded cartridges would match the high quality inflator heads perfectly. It ensures that the cartridge could be screwed right to the end of the CO2 inflator head where the pin punches a hole..
  • STRICT QC: Every Cartridge is weighted before packing in the factory!.
  • WARNING: Never store the cartridges in or near any hot place, such as in the car under direct sunlight, near heater and oven. Never use low quality CO2 head. Make sure the head punches the bottle fully, check if the gas being released within seconds. If not, or the gas being released very slowly or the gas freezing the head, please keep discharging the gas for a few mins until the bottle is fully empty..
Check Stock

CO2 Inflator Kit with 4 x16g CO2 Cartridges - Presta & Schrader Valve Compatible - CO2 Bike Pump for Road and Mountain Bikes

  • ...otect your hands. Once you've finished inflating your tire, Don't leave it on the side of the road for someone else to pick up. CO2 canisters are RECYCLABLE and one-time use only.
  • 【Perfect for Road/ Mountain Bike Tires】: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch.
  • care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
  • 【WARNING】: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly..
Check Stock

Zerodis Aquarium CO2 Generator, DIY Aquarium Planted Tank CO2 System Kit Tube Valve Guage Bottle for Aquarium Moss Plant Tank

  • co2 diffuser.As an indispensable role to the photosynthesis of water plants, this CO2 generator main for provide a real environment for plants’ growing.diy co2 kit.
  • aquarium co2 system.The pressure principle push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous carbon dioxide.co2 aquarium kit.
  • aquarium tools.The CO2 DIY kit is with ABS engineering plastic cover, with locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it’s with professional metal material gas adjusting valve to ensure pure CO2 DIY.diy co2 aquarium kit.
  • This CO2 Generator System Kit is with Pressure gauge for pressure display,gas adjustable function,and simple pressure relief, easy to operate, safe and practical advantages! Once start, sustainable gas supply!co2 regulator adapter.
  • Trimming valve regulation avoid by sudden big or small, can’t suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle.co2 diffuser.
Check Stock

Fieldpiece SOX3 Combustion Check New with Hard Case

  • Carbon monoxide gas detector is a portable detector for detecting carbon monoxide (CO) gas. It can continuously monitor the CO gas concentration in....
  • With a wide measuring range, the ambient temperature can be measured in 2 temperature units (°C and °F).​.
  • Clear LCD screen: Large LCD digital and character display for easy reading..
  • Small size, light weight, easy to carry and operate..
  • High precision portable CO gas tester with compact size and light weight is easy to carry and operate. It is widely used in petroleum, chemical, coal,....
Check Stock

CXWXC 16g Threaded CO2 Cartridges for Bike Tires - Cartridge for CO2 Inflator with Threaded Connection, CO2 Pump for Road and Mountain Bikes (D: 12 Pack)

  • ...otect your hands. Once you've finished inflating your tire, Don't leave it on the side of the road for someone else to pick up. CO2 canisters are RECYCLABLE and one-time use only.
  • 【Perfect for Road/ Mountain Bike Tires】: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch.
  • care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
  • 【WARNING】: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly..
Check Stock

Handheld Carbon Monoxide Meter, Portable CO Gas Detector, Gas Tester with 0~1000ppm Range, 1PPM Resolution(Battery NOT Included)

  • PROFESSIONAL TOOL: The gas detector is a device that detects the presence of CO gases in an area, often as part of a safety system. The professional detector can continuously monitor the CO gas concentration accurately in the surrounding environment. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down..
  • POWERFUL FUNCTION: Sound alarm works when CO gas concentration reaches the level of the alarm. The concentration of alarm value can be freely set. Auto shut off in 10 minutes without any operation. With a wide measuring range, the ambient temperature can be measured in 2 temperature units (°C and °F)..
  • HGIH QUALITY:This CO detector has a large LED backlight screen that allows users to easily cope with harsh environments such as darkness, making it easy to read and free users from time and place constraints. Adopt of ABS engineering plastics with high toughness, wear-resistance and stability, with a low power consumption and high precision..
  • HANDHELD SIZE: The CO gas meter is compact and lightweight, professional designed to fit comfortable in your palm,easy to carry and operate..
  • WIDELY APPLICABLE: The Gas detectors can be used to detect combustible, flammable and toxic ....
Check Stock

SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

  • EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly..
  • PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines..
  • VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types..
  • HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure..
  • WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!.
Check Stock

Mini Keg Beer Dispenser,ProMaker Stainless Steel Mini Keg Beer Growler Spear Tap Dispenser for Craft Beer Grow Homebrew Spear 2L / 3.6L / 4L / 5L / 10L (Keg Dispenser)

  • ◆ High Quality : All constructed from stainless steel for sleek design and maximum strength,perfect polished finish make it looks great also and last long time.
  • ◆ Ideal Brewing Tool :Mini keg dispenser can carbonate your homebrew inside your mini-keg,keep your beer fresh, delicious and tasty,No more broken glass, lost caps, or flat beer.
  • ◆ Build Winemaking Systerm :Allows for use of your existing keg dispensing and CO2 equipment with your mini keg.
  • Features a gas ball lock connection and one bar-style beer faucet connection to allow for use of standard CO2 equipment,Double Wall Quick Connector Spear and a pressure relief valve,requires Mini-keg,CO2 regulator, CO2 cartridge and gas line assembly.
  • ◆ Easy to Use : Dispenser includes 2 posts and 1 ball lock.
  • Connect the top (straight up) post to liquid line, angled post to gas,Fits 2L/3.6L/4L/5L/10L mini-keg growler and most other mini-kegs on Amazon that feature inner threaded caps..
  • ◆ Please Note :We would recommend you use the escaped gas from the beer to start your first pour and not add Co2 as there is less headspace in a full growler. When the pour slows add Co2 while pouring If using the Co2 cylinders.
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • Unique Long 15 Feet Tubing for Multiple Keg Dispensing: compared to other brewing hose kits, MRbrew co2 gas dispensing hose features a great length of 15 feet, you can apply this hose to your sankey keg tap system and cornelius ball lock kegging system simultaneously by cutting this 15 feet hose, this pretty long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside ....
Check Stock

LED CO2 Cannon Gun Handheld RGB DJ Jet Effect Fogger Smoke Gun CO2 Fog Machine for Party Halloween Stage Nightclub Concert Live Party US Stock

  • ★EASY TO USE AND ADJUSTABLE COLORS - LED CO2 Gun, RGB Mixed, can be adjusted according to the different colors, Easy to carry on and operate, are....
  • ★SIMPLE EQUIPMENT - This CO2 Gun-LED don't need DMX 512 controller like other CO2 Machines, only need 1 gun+Hose+tank. one CO2 tank is needed per....
  • ★COLOR CHANGES - This LED CO2 PARTY GUN has a color changing tube which changes from red, green and blue while is shooting out the CO2 Gas Party....
  • ★PRODUCT ADVANTAGE - Perfect appearance and technical design.
  • Gas spray distance can be 6-8M /19.7-26.2 ft.
  • ★SERVICE GUARANTEE - Our products are shipped from the US warehouse, and we will ship your order through UPS/USPS and other logistics as soon as....
Check Stock

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

CO2 Inflator Kit with 5 X 16g CO2 Threaded Cartridges- Presta & Schrader Valve Compatible -Portable CO2 Bike Tire Pump Come with Glueles Repair Kit for Road & Mountain Bike Style A

  • ...ter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort..
  • PERFECT FOR ROAD/ MOUNTAIN BIKE TIRES-- 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch.
  • care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
  • WARNING-- Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly..
Check Stock