BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch, Pneumatic (F21PL)
- Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications.
- Patented push button adjustable depth guide of the framing nailer gun sets nails to desired depths.
- Lightweight magnesium design for durability.
- Adjustable rafter hook allows users to hang tool on rafters and joists.
- Drives plastic collated 1-1/2-inch and 2-1/2-inch metal connector nails (.131-inch - .148-inch diameter).
- 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications.
Check StockRPG, New Oring Maintenance Rebuild Kits For Bostitch F21PL F28WW F33PT Stick Nailer
- Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications.
- Patented push button adjustable depth guide of the framing nailer gun sets nails to desired depths.
- Lightweight magnesium design for durability.
- Adjustable rafter hook allows users to hang tool on rafters and joists.
- Drives plastic collated 1-1/2-inch and 2-1/2-inch metal connector nails (.131-inch - .148-inch diameter).
- 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications.
Check StockLisa Parker Hocus Pocus Eyeglasses Case One Size Various
- For use in 30 to 34 degree paper tape collation framing nailers.
- Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
- Offset full head, also compatible with clipped head framing nailers.
- New and improved packaging helps protect product during shipment.
Check StockMetabo HPT Air Compressor | THE TANK™ | 200 PSI | 6 Gallon | Pancake | EC914S
- MORE PRESSURE: At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor.
- 30% MORE AIR FLOW: 4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor.
- VERSATILITY: Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers.
- PRODUCTIVITY: Consistently drives nails flush with no delay.
- LIGHTWEIGHT: At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor.
- CAPACITY: 6-gallon tank provides all the air to run a crew.
- DURABLE: All metal handle outlasts the harshest demands of the jobsite.
- LOW MAINTENANCE: Oil-free design for essentially no maintenance.
- AWARDS: 2014-2019 Pro Preferred Brand for pneumatic nailers by Builder & Developer Magazine.
Check Stock
Apex Tool Supply 9R208924 Replacement for DeWalt 9R208924 Nailer No Mar Tip (2 Pack) DWFP12233 Type 1
- Everything You Need: This kit features a 21 degree framing nailer, 16-gauge straight finish nailer, 18-gauge brad nailer, 18-gauge narrow crown Stapler, 23-gauge micro pin nailer, fine wire stapler, and mini palm nailer – plus 2 canvas bags and fasteners for each tool..
- Pro Design: This versatile 9 piece combo kit includes nailers to use on nearly every project, from arts and crafts to framing and decking and any job in between. Fasteners are also included for each tool, so you can get started on your project right away..
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock
Freeman FR.131-3B 21 Degree .131 x 3 Plastic Collated Brite Finish Smooth Shank Full Round Head Framing Nails 2000 count
- Nailed It: These .131" plastic collated smooth shank framing nails are 3" long and designed for use in the 21 degree full round head framing nailer models PFR2190 and SFR2190. Each box includes 2000 nails to ensure you have plenty of fasteners on hand..
- Pro Design: These 3" framing nails are plastic collated for smooth driving from a pneumatic nailer and they feature a smooth shank, suitable for many framing and general construction applications. They offer appropriate holding power for most everyday uses..
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode....
Check StockPiston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350
- Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
- Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
- This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
- Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check StockB&C Eagle A3X131/33 Offset Round Head 3-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails 500 per box
- For use in 30 to 34 degree paper tape collation framing nailers.
- Bright finish for interior use in non-treated lumber only.
- Offset full head, also compatible with clipped head framing nailers.
- New and improved packaging helps protect product during shipment.
Check StockGripe Rite Prime Guard GR08RHG1M 21° Plastic Strip Round Head Exterior Galvanized Collated Framing Nails, 2-3/8\ x 0.113\
- For best results, use with grip-rite Grtfr83 and/or Grtrh350 21 Degree round head framing nailers.
- Compatible with most 21 Degree round head framing nailers including: BOSTITCH, dealt, Duo-Fast, Hitachi, Makita, PORTER-CABLE, Ridgid and Senco.
- For use on all exterior applications and with all treated lumber.
- Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
- Meets or exceeds ASTM F1667 (if applicable).
Check StockGrip Rite Prime Guard GRP10RHGH1 30 Degree Paper Tape Offset Round Head Exterior Galvanized Collated Framing Nails 3 x 0.120
- For best results, use with Grip-rite GRTFC83 and/or GRTCH350 30 degree paper tape offset round head Framing nailers.
- Compatible with most 3--34 degree Paper tape Framing nailers, Including: Bostitch, DeWalt, Hitachi, Makita, Palode, Porter-Cable, Ridgid, Senco.
- For use on all exterior applications and with all treated lumber.
- Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
- Meets or Exceeds ASTM F1667 (if applicable).
Check StockB&C Eagle A314X131HD/28 Offset Round Head 3-1/4-Inch x .131 x 28 Degree Hot Dip Galvanized Smooth Shank Wire Collated Framing Nails 500 per box
- For use in 28 degree wire collation framing nailers.
- Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
- Offset full head, also compatible with clipped head framing nailers.
- New and improved packaging helps protect product during shipment.
Check StockGrip Rite Prime Guard GR034HG1M 21 Degree Plastic Strip Round Head Exterior Galvanized Collated Framing Nails 3-1/4 x 0.131
- For best results, use with Grip-Rite GRTFR83 and/or GRTRH350 21 degree round head framing nailers.
- Compatible with most 21 degree round head framing nailers including: Bostitch, dealt, Duo-Fast, Hitachi, Makita, Porter-cable, Ridgid and Senco.
- For use on all exterior applications and with all treated lumber.
- Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
- Meets or Exceeds ASTM F1667 (if applicable).
Check StockBHTOP AP67 Aluminum Magazine (#885-827) for Hitachi NR83A3 Framing Nailers
- For Hitachi NR83A3 Framing Nailers and BHTOP Framing nailer.
- For 21 Degree 2" to 3-1/4"(50-83mm) framing nails..
- Fastener Type: Full Round Head, Plastic Strip Collation.
Check Stock
