Reviews Frame Mounting Bracket

Iwillink 24 Port Patch Panel, Cat6 Patch Panel, RJ45 Keystone Network Patch Panel Rackmount or Wall Mount

  • 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
  • EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
  • OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check Stock

Pack of 2 | 16\ Roller and Bracket Set | 1.5\ Diameter

  • 16″ between frame, 16 Ga. Galvanized Steel Tube Roller with crimped, oiled bearings.
  • 2-hole steel mounting bracket, 9/32″ for 1/4″ axle (3) mounting holes, 13/32″ opening for 3/8″ screws or bolts.
  • Conveyor roller is spring loaded on one end and is removable from the bracket..
  • 1/4″ diameter mild steel axle, 17″ long.
  • Available in (2) length configurations: 10″ between frame and 16″ between the frame. Durable, 100-pound capacity. SKU: 150R-16-BR-2, MPN: UI150R-16-BR-2.
Check Stock

Nilight Windshield Frame Mounting Bracket for 52” LED Light Bar and Pod Light on Wrangler JK 2007-2017, 2 Years Warranty

  • Fitment Type: Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52” light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust..
  • Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination.
  • SIDE MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.
  • High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan.
  • Simple Installation: Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. (Note: If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit).
Check Stock

Aootf Front License Plate Bracket- Universal Front Bumper License Plate Mounting Kit, Car Tag Holder Adapter& Black Aluminum Plate Cover, Anti-Theft Lock Screw Bolt, Caps, For US Vehicle Trailer Truck

  • Front License Plate Mounting Kit- plastic front license plate adapter and Black Aluminum license plate frame, for vehicles with contoured bumpers, mounting front license plates to a trailer or adding an additional novelty plate to any vehicle, or as a spacer recessed into the license plate area at the rear of the vehicle. For those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required.
  • Universal License Plate Bracket- Front license plate holder kit- 6 x 12 inch, suitable for standard novelty US or Canadian license plate mount. Durable and long lasting! 4-hole Aluminum License Plate holder black with slim edges, will not cover the license plate Registration information, legal street. Aluminum alloy material, light weight but strong and durable, durable, anti-corrosion, anti-rust, weatherproof.
  • Includes License Plate Screw Hardware Kit- Easy To Install-all the front license plate mounting hardware is included- plastic license plate bracket, license plate Aluminum frame, stainless steel license plate screws (including anti-theft license plate bolts), inserts nuts, screwdriver , black screw cap covers. No additional hardware is required to install in a flash..
Check Stock

ZXFOOG Front License Plate Mounting Kit- Front Bumper License Plate Bracket & Black Silicone Car Tag Frame, Universal No Drilling Hole Adapter for Vehicle/Truck/Trailer, Screws Caps, Rattle Proof Pad

  • FRONT LICENSE PLATE BRACKET- Perfect for those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required. The plastic front license plate adapter is ideal for vehicles with contoured bumpers, mounting front license plate to a trailer or adding an additional novelty plate to any vehicle, or as a spacer recessed into the license plate area at the rear of the vehicle.
  • SILICONE LICENSE PLATE FRAME- Black tag frame uses high-quality industrial grade silicone material, Heavy duty license plate frame can be durable, soft and tough. Rust proof, corrosion proof, weather proof, rattle proof, make your car license plate better protected. 5 drainage holes are designed on the bottom and sides of the silicone frame, to release rain and dust. 4 hole frame can Install firmly.
  • FOR UNIVERSAL FRONT LICENSE PLATE- front plate holder adjuster and frame combo are designed to fit all 6x12 inch standard /novelty plates. The slim frame design will not block the registration sticker on the license plate, so they're legal to be on road and you will not be chased by traffic police. Comes in 1 set for the front bumper or back trunk of your car tag. 3 types of frames available: stainless s....
Check Stock

CELESTION V-Type Guitar Speaker (T5906)

  • L-type horizontal mounting bracket, you can install single-tube preamp, two tubes Preamp, three tubes Preamp..
  • The surface of the bracket is spray-painted in silver gray for a more beautiful appearance..
  • The opening diameter of the 3 tube sockets is 19mm, The distance between the sockets is increased in order to facilitate the installation of some larger enthusiast RC components..
  • Frame size: 150x60x25mm / 5.9x2.36x0.98 inch..
  • Package Includes: 1pc Large L-type Mounting Bracket, 2pcs Small L-type Bracket, 3pcs Silver Plated Small 9-pin Tube Sockets, 16sets 3*8mm Mounting Screws (Not contain tubes and other parts)..
Check Stock

StarTech.com 6U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT6)

  • 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
  • EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
  • OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check Stock

Universal Winch Mount Bracket, Heavy Duty Right Angle Mounting Winch Bracket, 5MM / 3/16INCH Thickness Solid Steel Hand Winch Bracket Winch Mounting Plate for Trailers, ATV, Trucks and Vehicle

  • 【HEAVY DUTY HAND WINCH BRACKET】The mounting winch bracket is constructed of 5MM steel, solid and build to last, ideal for using with 600lbs to 3500lbs hand winches.
  • 【UNIVERSAL MOUNTING WINCH BRACKET】Mounting Plate Size: 7”x4.3”x4.3”(LxWxH).
  • Please check the size information carefully before purchase (The second picture shows specific size).
  • 【BLACK COATED WINCH MOUNTING PLATE】The hand winch mounting plate has a black powder coated for supreme durability and weather resistant.
  • 【WIDE APPLICATIONS】The right-angle winch bracket is designed for using in securing the hand operated winch to building or vehicle frame, perfect for boat trailer, ATV, trucks, and any other vehicle.
  • 【100% SATISFACTION GUARANTEE】Your satisfaction means a lot for us.
  • Order the Angle-Mounting Winch Bracket with confidence! Click on the ""Add To Cart"" Button NOW!".
Check Stock

Front License Plate Mounting Kit- Stainless Steel License Plate Frame and Universal Bracket for No Drilling Hole Front Bumper, Car Tag Cover Adapter with Screws, Chrome Caps, Rattle Proof Pads

  • Universal Front License Plate Bracket- The black license plate adapter bracket is made of ABS hard plastic, with multiple mounting holes, is ideal for vehicles with contoured bumpers, mounting front license plate to a trailer or adding an additional novelty plate to any vehicle. Perfect for those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required..
  • Heavy-Duty Metal License Plate Frame- The metal frame is made of high-quality stainless steel, with a smooth and high gloss surface. 1.6mm thickness, strong and durable, suitable for use in various environments and climates, and it protects the license plate rust proof. Mirror polished surface, no coating, no need to worry about fading and aging, with Chrome Screw Cap, the high-gloss frame keeps your license plate cool and sparkling.
  • Slim Frame For Universal US License Plate- license plate holder bracket combo is designed to fit all standard 6x12 inch novelty/license plates. It fits most standard size US license plates. Thin edges will not obscure the registration label on the license plate to ensure that the street is legal. Comes in 1 set for the front bumper or back trunk of your car license plate.
Check Stock

Hotop Blind Brackets Low Profile Box Mounting Bracket for Window Blinds White

  • Package includes: 6 pieces (3 sets) blind brackets in white, each set has left and right mounting bracket, which can be installed in one blind stand,....
  • Size information: the low profile box mounting bracket is 2 2/1 inch in width, 1 3/4 inch in height and 1 inch in depth, suitable for headrail that....
  • Durable material: box mounting brackets are made of iron, durable and sturdy, not easy to break or deform, and can be applied for a long time.
  • White color: classic, concise and generous, it can match with the curtain of a variety of styles and household adornment.
  • Application occasions: the low profile box mounting bracket can be installed on the top of the blind frame, the side or the back of the window casing,....
Check Stock

Slide-Co 16449 Closet Door Roller with 7/8 inch Nylon Wheel

  • Used by Acme, Stanley and a variety of other wardrobe door manufacturers.
  • Adjustable 2 piece top mounted bracket assembly.
  • Stamped steel bracket with nylon roller assembly.
  • Can act as corner bracket for steel frame by-passing doors.
  • Fits older Acme steel frame wardrobe doors.
Check Stock

JHR-AUTO Trailer License Plate Bracket- Truck/RVs/Boats/Jet Ski Rubber Car Tag Holder and Black Silicone Frame, Universal Adjustable License Plate Mounting Kit with Stainless Steel Screw Cap

  • BOAT TRAILER LICENSE PLATE HOLDER- Rubber license plate mounting kit is designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, soft and tough, heavy-duty, prevent damage and loss of your Truck/Trailer/RV license plate, make the license plate light bracket last longer. This product was specifically designed for Boat, PWC, Snowmobile, ATV, Utility trailers and RVs.
  • RUBBER LICENSE PLATE BRACKET- This product is made from premium tough, high tensile, multiply fabric reinforced thick neoprene rubber, Replaces flimsy plastic, rigid steel and aluminum holders. Flexible, durable, corrosion-proof, tear-proof, fatigue-proof, cold temperatures, good UV resistance and long-lasting.
  • SILICONE LICENSE PLATE FRAME- The black rustproof / rattleproof car tag frame uses industrial-grade silicone material, Heavy-duty, durable, soft and tough, can withstand extremely high and low temperatures. The flexible material protects your vehicle from license plate rattle and scratching. 5 drainage holes are designed on the bottom of the silicone plate frame, to release rain and dust.
  • EASY TO INSTALL- The slim frame is suitable for all 12 x 6 inch standard plates in the United States/Canada. Thin edge design, Will not cover the registration ....
Check Stock

Bell AirStrike Mini Frame Pump

  • Pumps high volume for short barrel pump and compact head attached easily to all valve stems.
  • Ergonomic, pivoting handle provides great pumping grip.
  • Ball needle stored in the mounting bracket.
  • Convertible head changes to fit schrader and presta valves.
Check Stock