Reviews Flywheel Bolt Kit

Chevy/GM Turbo TH-350/TH-400 Black Steel Flywheel/Flexplate Cover

• Keep debris, dirt, and grime out of your transmission with this flywheel/flexplate dust cover.
• Fits Chevy engines as well as other GM engines with the starter on the passenger side.
• Why spend valuable time cleaning up that greasy, rusty, and downright disgusting stock cover.
• Hardware is not included. Use flywheel cover bolt kit 91303811 or 91303831.

Shorty's Skate Tool The Wench

• Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
• Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
• Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
• Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
• 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

• SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate.
• Our turner helps you apply proper torque to nuts during flywheel installation.
• COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently.
• This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft.
• FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key.
• Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs.
• COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable.
• Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing.
• This flywheel tool folds for easy storage.
• SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel.
• Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts.

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

• Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
• Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
• Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
• Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
• Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

• Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
• Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
• Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
• Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
• Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..

Schaeffler LuK DMF123 Dual Mass Flywheel, OEM Dual Mass Flywheel, LuK Replacement Clutch Parts

• OEM Clutch Replacement Kits: Our LuK DMF123 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch replacement..
• Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the flywheel-to-crankshaft bolt heads is so small that the flywheel must be replaced with every clutch installation..
• LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a primary section that bolts to the crankshaft, and a secondary section, which the clutch is bolted onto..
• Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the transmission. By design, dual-mass flywheels cannot be resurfaced..
• OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is carefully crafted to suit the exact needs of a car, keeping in mind....

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

• [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
• [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
• [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
• Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
• [Built to Last] Heat-treated carbon steel ensures maximum strength.
• Chrome and black oxide finishes resist rust and corrosion.
• Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
• [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

• Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
• Chrome and black oxide finishes resist rust and corrosion.
• Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
• Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
• Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
• Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
• Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
• The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.

Valeo 52151203 Solid Flywheel Conversion Kit Compatible with Select Mini Cooper Models, 2002-2008

• The same installation time as a Dual Mass Flywheel kit - no special tools required..
• All new components provide better thermal resistance and full engine gearbox protection.
• The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
• Notably reduces the cost of repair when compared to the DMF Kit.
• Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).

Valeo 52285615 Solid Flywheel Conversion Kit Compatible with Select Audi and Volkswagen Models

• The same installation time as a Dual Mass Flywheel kit - no special tools required..
• All new components provide better thermal resistance and full engine gearbox protection.
• The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
• Notably reduces the cost of repair when compared to the DMF Kit.
• Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).

Valeo 52285616 Solid Flywheel Clutch Conversion Kit Compatible with Select Volkswagen Jetta Golf Beetle and Rabbit Models

• The same installation time as a Dual Mass Flywheel kit - no special tools required..
• All new components provide better thermal resistance and full engine gearbox protection.
• The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
• Notably reduces the cost of repair when compared to the DMF Kit.
• Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts,....

Mopar Bolt Hex Head - 6504383

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

• Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
• Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
• Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
• Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.