Reviews Flywheel Puller

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

  • SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate.
  • Our turner helps you apply proper torque to nuts during flywheel installation.
  • COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently.
  • This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft.
  • FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key.
  • Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs.
  • COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable.
  • Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing.
  • This flywheel tool folds for easy storage.
  • SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel.
  • Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts.
Check Stock

Zinger Mercury Mariner Force Yamaha 1 1/2' -16 Flywheel Puller Removal Tool 91-849154T1

  • For Mercury Mariner Force Yamaha Flywheel Puller with crank shaft protector 91-849154T1.
  • For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads units from the 1960s to present,but pls check thread diameter to verity.
  • Warm tips: please apply some lube oil on the flywheel and puller tool before use it.Thank you !.
Check Stock

JEM&JULES Flywheel Magneto Stator Puller Tool for Yamaha Blaster 200 1988-2006 27mm×1.0

  • Flywheel Stator Magneto Puller size: 24mm x 27mm.
  • Fits for GY6 125cc 150cc Chinese Scooter Parts Pit Bike ATV Dirt Bike.
  • Fit for Honda Yamaha Suzuki KTM ATV scooter dirt bike(read description for detailed information).
  • Please check with the size before you buy, and read description for detailed information.
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

Zinger Mercury Mariner Outboard Lift,Flywheel Puller Removal Tool 91-849154T1,Lift Ring 91-90455-1

  • Flywheel puller with crank shaft protector 91-849154T1,Lifting Ring 91-90455-1.
  • A must have tool when changing Mercury outboard motors on boats and lifting the engine off transom.
  • Nice craftsmanship and solid. 5/8"-18 TPI Bolt and Lift Ring Threads.
  • For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads units from the 1960s to present,but pls check thread diameter to verity.
  • Warm tips: please apply some lube oil on the flywheel and puller tool before use it.Thank you !.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock