Reviews Float Level Switch Sensors

2 Inch Dial Face 1/4 Inch NPT Water Pump Pressure Gauge with 1/4 Inch NPT Male 1/2 Inch NPT Adapter Brass Fitting and Tape

  • NEW GENERATION: On the basis of the drain mode, our Ortis water level controller has added a water mode and 3 load running mode for you to choose, you can manully select the load running mode according to your needs. The Values are clearly displayed with LED indicators, easier to check and set for you.
  • HI-LO DUAL SENSORS: The hi-lo sensors uses a patented water level detection method, which keeps the electrode intact for 10 years. It is made of 304 stainless steel and is not affected by mineral or water debris. It has strong corrosion resistance and never needs to be cleaned. The height of two sensors is adjustable, you can decrease how often the pump turns on/off by adjusting the sensors in order to save energy and max your pump's service life.
  • SAFE & STABLE: Ortis pump controller can completely overcome the shortcoming of the tranditional mechanical float switch which is prone to mechanical failure. Long life and small size, no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe.
  • OVERLOAD & PUMP FAILURE ALARM: When the pump power is greater than 23A, overload protection will be activated to protect your safety. Built-in alarms will alert you in case of pump failure, blocked discharge pipe, and more.
Check Stock

Liquid Level Sensor, Liquid Water Level Float Sensor Switch Side-Mounted 304 Stainless Steel 1/2NPT Male Thread DC0-110V, Model: YZ-SUS304 (A Type)

  • ♠♠♠♠♠【Application of Float Sensor Switch 】-- Suitable for liquids of different densities, pressures and temperatures. The product can be used for water level control of water dispensers, water heaters, solar energy, air conditioners, humidifiers, bathroom equipment, sales machines, fuel tanks, water towers, chemical liquids, anti-dry-burning water level sensors for water heating equipment such as kitchen equipment and water heaters..
  • ♠♠♠♠♠【High Quality 】-- High temperature resistance, not easy to rust and long service life. High accuracy, high reliability and easy installation. Maximum Temperature Resistance: 150℃.
  • ♠♠♠♠♠【Note 】-- The stroke of the float is 10mm, that is, the control range is 10 mm. If the control range is required, it can be installed in 2 combinations. Can do multi-point control, the control switch can be fixed with the liquid level position..
  • ♠♠♠♠♠【Material 】-- Made of 304 stainless steel material, can be used in weak acid and alkali places..
  • ♠♠♠♠♠【Quality Assurance】-- The quality of our products is guaranteed and can be used without hesitation. If you have any questions during use, please feel free to contact us..
Check Stock

Fluval Ribbed Hosing for 306/307 - 406/407 9.8Ft A20015

  • The float sensor detects whether the water replenishment tank is short of water, and once the water is short, it will stop and alarm..
  • Please install the sensor correctly (the main picture has a picture description), otherwise the product will not work. And the distance between the two sensors is not less than 10cm. The height difference between the make-up bucket and the sump/master tank should not exceed 1.5 meters, and the liquid level of the make-up bucket should not be higher than the liquid level of the sump/master tank..
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Superior Pump 99006 Garden Hose Adapter, FIP to 3/4\ MIP, Black

  • The float switch can be installed at the top or bottom of the tank, depending on whether you want to detect water rising or falling..
  • Floating ball switch is a kind of liquid level control device with simple structure and convenient use. It has the advantages of small volume and long working life compared with general mechanical switch. When selecting the right material, any kind of liquid, pressure and temperature can be used..
  • Widely Applications: For tank / pump water level control.
  • Used for water level control of household appliances.
  • Used for water level control of swimming pool, fountain, pond, etc..
  • Please Note : Float switch can not directly control solenoid valve or high power relay, AC contactor, etc. Small relays are required to transition..
Check Stock

DEVMO Mini Indicator Vertical Water Level Sensor Stainless Steel 45mm Float Switch

  • ★This is a Mini stainless steel float switch,contains no mercury..
  • ★This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device..
  • ★This Mini float switch is a simple structure,easy installation liquid level controller.It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperature can be used in any environment..
  • ★Light weight and simple working principle,high reliability..
  • ★The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water`s rise or fall..
Check Stock

SeaSense Hand Bilge Pump Hose (24- Inch X 36- Inch)

  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
Check Stock

Amarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater

  • Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
  • ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
  • ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

SEAFLO Automatic Submersible Boat Bilge Water Pump 12v Auto with Float Switch-New 750gph 4 Year Warranty!

  • Compact, automatic, fully submersible electric pump.
  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
Check Stock

PENTAIR WATER FPPK50-P2 Jet Pump Overhaul Repair Kit

  • 【package include】1pcs 10M 33ft Cable Float Switch Water Level Controller.
  • 【Product parameter 】Rated Voltage：AC 220V/380V.
  • Maximum current ：15/8A frequency ：50-60Hz；Maximum temperature ：70°C.
  • 【Design】The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways..
  • 【Application】Suitable for Sump Pump, swimming pool ，Water Tank control the level of water.
  • 【Buy with confidence 】for your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them.
Check Stock

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch Blue - Automatic

  • Outlet Diameter: 29mm/ 1.14 Inch (1-1/8").
  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
Check Stock