Reviews Flash Mcu

Diodes Incorporated Microprocessors - MPU ARM Cortex-A5 MPU 32bit, Video decoder (ATSAMA5D44A-CU)

  • 1 Pcs ATTINY84A-PU 8-bit Microcontroller with 8K Bytes In-System Programmable Flash..
  • MCU MICROCONTROLLER, 8 BIT, ATTINY, 20MHZ, DIP-14..
  • 8K Bytes of In-System, Self-programmable Flash Program Memory.
  • 512 Bytes of In-System Programmable EEPROM.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic connect system and integrated regulated LiPo charger No Soldering required

  • ATSAMD51J20 microcontroller 32-bit ARM Cortex-M4F MCU Up to 120MHz CPU speed 1MB flash memory 256KB SRAM Up to 6 SERCOM interfaces.
  • Micro-B USB interface for programming and power.
  • 4Mb (external) flash memory - Headers not included.
Check Stock

Major Brands 68B09E Microprocessor Unit with Exter Clock, 8 Bit, 2 MHz, Dip 40, 14.22 mm W x 4.06 mm H x 52.45 mm L (Pack of 2)

  • ATMEGA32-16PU MCU, 8BIT, ATMEGA, 16MHZ, DIP-40.
  • 32K Bytes of In-System Self-Programmable Flash,Bytes EEPROM,2K Byte Internal SRAM.
  • 8-bit AVR Microcontroller with 32K Bytes In-System Programmable Flash.
  • 8-channel, 10-bit ADC,32 Programmable I/O Lines.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

waveshare RP2040-Plus Mini Board High-Performance Pico-Like MCU Board Based on Raspberry Pi RP2040 Chip,Dual-core Arm Cortex M0+ Processor,USB-C Connector,Onboard 4MB Flash,Higher Current DC-DC Chip

  • 【RP2040 MCU Board Plus Version 】A Pico-like MCU board based on Raspberry Pi RP2040,Compatible With Most Of The Raspberry Pi Pico Add-On Modules.
  • 【As same as Raspberry Pi Pico】It incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins..
  • 【What's different with Raspberry Pi Pico】It features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip..
  • 【C/C++, MicroPython Support】Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started.
  • 【26 × Multi-Function GPIO Pins】Configurable Pin Function, Allows Flexible Development And Integration.
Check Stock

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

  • ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
  • The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
  • ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
  • Flash integrated on the module and are not recommended for other uses..
Check Stock

HiLetgo BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit

  • 5V isolate with MCU, and effectively protect MCU.
  • Voltage indication of motor driver output end.
  • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
  • isolation chip 5 V power supply (can share with MCU 5 V)..
  • Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
  • two heat flow passing through an error signal output..
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply.
Check Stock

Google Coral USB Edge TPU ML Accelerator coprocessor for Raspberry Pi and Other Embedded Single Board Computers

  • Specifications: Arm 32-bit Cortex-M0+ Microprocessor (MCU): Up to 32 MHz max 16 KB Flash memory with ECC 2 KB RAM Connections: USB 3.1 (gen 1) port and cable (SuperSpeed, 5Gb/s transfer speed).
  • Features: Google Edge TPU ML accelerator coprocessor, USB 3.0 Type-C socket, Supports Debian Linux on host CPU, Models are built using TensorFlow. Fully supports MobileNet and Inception architectures through custom architectures are possible. Compatible with Google Cloud..
Check Stock

Happymodel Mobula6 Quadcopter Indoor Four-axis 1S 65mm Brushless Bwhoop Drone BNF AIO 4IN1 Crazybee F4 Lite Flight Controll Built-in 5.8G VTX Parts Without Remote Controller (25000KV Frsky RX)

  • Flight controller: (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21.
  • Current: 5A continuous peak 6A (3 seconds).
  • OnboardFrsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.
  • OnboardFlysky SPIreceiver Version: SPI BUS receiver.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m.
Check Stock

FUERAN DP - DisplayPort Display Emulator EDID Emulator Plug 4K fit Headless 4096x2160@60Hz

  • Supports maximum 4096*2160 60HZ, default 1920*1080P 60HZ, 4K regular 3840*2160 60HZ, minimum 800*600..
  • Embedded MCU and SPI flash, can better communicate with the device, so that it can play the maximum efficiency, working state micro heat..
  • EDID smart lock screen, Set parameters good after， in Not messy at next boot. Support hot plug technology HPD and HDCP1.4, 2.3 protection..
  • Support DP1.1a, 1.2a, 1.3, 1.4 input formats, HDMI 2.0 transmitter, up to 6.0Gbit / sec per TMDS data channel.
  • HDMI 2.0 is supported up to the allowable maximum TMDS date rate of 6Gbit/sec, enabling 4K UHD video at 60 frames per second in 4:4:4 video mode at 24....
Check Stock

StarTech.com 1 Port RS-232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (NETRS232), Black

  • This product do not include user manual, if you need, we will send the pdf file to you.
  • HF2211 is a low-cost serial device server,which function is to realize bidirectional transparent transmission between RS232/RS485/RS422 and WiFi/Ethernet..
  • Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps.
  • MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos.
Check Stock

Captain America: Symbol Of Truth (2022-) #1

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

Alone in This (You Have Me)

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

EPOMAKER GK61X RGB Hotswap Custom DIY Kit for 60% Keyboard, PCB Mounting Plate Case (GK61X Black)

  • ... RGB SMD light. More than 16.8 million lights are available. It’s more than a keyboard but also a fun toy.
  • Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you will be able to program the backlight and macro settings. Built-in flash memory can save the setting at offline mode, never afraid of losing it.
  • Professional 60% Keyboard. GK61X is 60% layout PCB, widely compatible with most of 60% keyboard case, you could change the case as you wish. The chipset is 32 Bit MCU + 8M Flash on-board memory, and 3 pieces independent 256*256*256 RGB color management chip.
  • All-in-One Kit. GK61X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable. More than that, you even got the music-driven motion effects! In this mode, the backlit will blinks with the music, cool and interesting.
Check Stock