Reviews Ic Pic Mcu Flash

Attiny416-XNANO

  • ATtiny416 microcontroller, 20-pin 4kB Flash MCU.
  • Embedded programmer for programming the host MCU (mEDBG).
Check Stock

ARCELI TL866II Plus USB High Performance EEPROM Flash BIOS Programmer for ATMEL AVR ATMEGA AT90 PIC GAL SRAM CMOS

  • It can automatically identify the operating system to install and run under WIN2000 / WIN XP /WIN 2003/ WIN 2008/ WIN VISTA / WIN7 / WIN8 / WIN10 (32BIit/64Bit).
  • The programming speed is greatly improved . It is suitable for small batch production and supports 4 programmers for one computer..
  • A wide range of chip support, supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test,54/74 and CMOS4000 integrated circuit integrated functional test..
  • Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits. 25 series Nor Flash capacity support to 512Mbits..
  • Pin contact check function, poor contact pin can pinpoint.
  • Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming without external power integrated programmer..
Check Stock

Xiuxin 2pcs 5V 8 Channel Relay Module Board for Arduino PIC AVR DSP ARM

  • 2pcs/lot 8 Channel relay module board, Working voltage: 5V.
  • This board is for Arduino PIC AVR DSP ARM.
  • Support all single-chip microcomputer control,Industrial circle,PLC controller,Household intelligent control.
  • Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control..
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

WinnerEco 5pcs 1 Channel DC 5V Relay Switch Module for Raspberry Pi ARM AVR

  • 1-channel relay interface board which can be controlled directly by a wide range of microcontrollers. Controllers includes AVR, PIC, ARM, PLC, etc..
  • Relay output maximum contact is AC110V ~ AC250V 10A and DC30V 10A..
  • Standard interface can be directly connected with microcontrollers..
  • Red working status indicator for power on indication.Green working status indicator for relay the switch..
  • It can control various appliances and other equipments with large current.Widely used for all MCU control, industrial sector, PLC control, smart home control..
Check Stock

ALMOCN 6Pcs DC 5V 1 Channel Relay Module With Optocoupler Isolation Support High or Low Level Trigger

  • The Relay Board Maximum load: AC 250V/10A, DC 30V/10A.
  • Using SMD optocoupler isolation, strong driving capability, stable performance..
  • Can be set high or low level trigger with jumper cap, to meet the demand of more trigger applications..
  • Fault-tolerant design, even if the control line is broken, the relay will not move..
  • Wide Application,The relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
Check Stock

5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

ALLSOCKET SSOP28-5.7-0.65 SOP28 Package SOP-28(5.7)-0.65 IC Test & Burn-in Socket SSOP28 to DIP28 Programming Adapter for Testing,Debug,Validation 0.65mm Pitch 5.7mm Width

  • APPLY FOR IC PACKAGE: OTS-28(34)-0.65-01, SOP-28(34)-0.65.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

ALLSOCKET SOP24-7.5-1.27 SOP24 Package SOP-24(7.5)-1.27 IC Test & Burn-in Socket SOP24 to DIP24 Programming Adapter for Testing,Debug,Validation,Programming 1.27mm Pitch 7.5mm Width(300mil)

  • APPLY FOR IC PACKAGE: OTS-24(28)-1.27-04, SOP-24(28)-1.27.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

ALLSOCKET SSOP16-4.4-0.65 SOP16 Package TSSOP16 SSOP16 to DIP16 Programming Adapter Testing/Debug Socket 0.65mm Pitch 4.4mm Width(173mil) TSSOP16 package S-SSOP16(28)-0.65 OTS16(28)-0.65-01

  • APPLY FOR IC PACKAGE: OTS-16(28)-0.65-01, SOP-16(28)-0.65.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

ALLSOCKET SSOP8-4.4-0.65 SOP8 Package TSSOP8 SSOP8 to DIP8 Programming Adapter Testing/Debug Socket 0.65mm Pitch 4.4mm Width(173mil) S-SSOP8(28)-0.65 OTS8(28)-0.65-01

  • APPLY FOR IC PACKAGE: OTS-8(28)-0.65-01, SOP-8(28)-0.65.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock