Reviews Flanged Linear Bushing

Lisle 29450 Short Anchor Pin Bushing Driver

  • Includes a 7" Driver for Applications withLimited Access..
  • Pneumatic bushing driver set removes and installs truck andtrailer 1-3/8" anchor pin bushings and stuck anchor pins..
  • Double sided cone snaps onto driver to drive out and installbushings.
  • Use flanged end to install and tapered end toremove.
  • Also removes truck leaf spring bushings..
Check Stock

DASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing

  • 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
  • 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
  • [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
  • 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

8 Inch Ball Screw Actuator, Linear Motion Actuators with Handwheel Manual Sliding Table CNC Linear Guide Stage Linear Motion Slide Rails Linear Bearings and Rails 200mm Stroke

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

Yeahmart Linear Rail 2 Pcs 8mm x 400mm Cylinder Liner Rail Linear Shaft Optical Axis + 4 Pcs Rod Rail Shaft Support SK8 + 2Pcs Linear Motion Ball Bearing Slide Bushing SCS8UU

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

AmazonCommercial 25 Gallon Square Waste Container Grey 2-pack

  • 25 gallon square wastebasket for use in commercial environments.
  • Appropriate for offices, public spaces, restaurants, schools, hospitals, and other high-traffic areas.
  • Durably made with heavy-duty, linear low-density polyethelene plastic that stands up well to every day use.
  • Resistant to damage such as fading, staining, or cracking.
  • Flanged rim and reinforced base for added strength.
Check Stock

Huskey Parts Company King Pin Steering Knuckle Bushing Kit for 2004-Up Club Car Precedent Gas Electric Golf Cart 102288201, 102288401

  • Complete King Pin Buhing kit for Club Car Precedent 2004-Up Gas Electric Golf Cart.
  • 4 x Brzone Flanged Bushing. OEM Part Number: 102288201.
  • 2 x King Pin wave washer. OEM Part Number: 102288401.
  • This set of repair kit will do your whole cart..
  • Eliminate Play In Your Front End, Level Out Your Ride, Reduce Front End Sag.
Check Stock

Clarostat 100K OHM MODPOT Linear Taper Potentiometer 1W 1 Watt 10%

  • .25″ “Flat D” shaft diameter, .35″ (9.5mm) length to allow for a knob if desired.
  • Shaft Length: 22mm (7/8″), Bushing Length:12.5mm (0.50″), Total Shaft Length 1.50″.
  • Body is .63″ square, Mounts in a .375″ hole.
Check Stock

Slocable Both Ends Tapped Precision Linear Shaft Stainless Steel 8mmX200mm

  • High precision: With high-precision dimensional tolerance and geometric tolerance, it is widely used in various precision equipment, so you can use it with confidence..
  • Wide range of applications: Various chasing schemes can be selected to meet different use environments..
  • Wear-resistant: Usually used in conjunction with linear bearing products, it has excellent linear guiding function. Compared with the general shaft and bushing structure, even if it is high-speed reciprocating motion, it will not have great wear..
  • Rust prevention: hard chromium plated surface treatment can be selected, which not only has excellent rust prevention performance, but also the coating hardness has reached hv750. It will not be easily worn when matched with high hardness workpieces..
  • Good material: Bearing steel with excellent wear resistance (equivalent to SUJ2 and SUS440C) or equivalent high hardness corrosion-resistant steel are used for high-frequency quenching treatment to enhance wear resistance and maintain the original toughness..
Check Stock

4PCS SBR16UU SBR Linear Ball Bearing Slide Block for SBR16 Linear Rail Guide

  • Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

uxcell LMK20UU Square Flange Linear Ball Bearings, 20mm Bore Dia, 32mm OD, 42mm Length(Pack of 2)

  • Model: LMK20UU (Nominal Shaft Diamter (dr): 20mm, Outer Diameter (D): 32mm, Total Length (L): 42mm).
  • Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

uxcell LMK10UU Square Flange Linear Ball Bearings, 10mm Bore Dia, 19mm OD, 29mm Length(Pack of 2)

  • Model: LMK10UU (Nominal Shaft Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 29mm).
  • Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

uxcell LM16UU Round Flange Linear Ball Bearings, 16mm Bore Dia, 28mm OD, 37mm Length(Pack of 2)

  • Model: LM16UU (Nominal Shaft Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock