Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\
- 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
- 【Feature】 - Gas spring strut joint connector end fitting..
- 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
- 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check StockQMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover
- End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
- End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
- Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
- Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check StockOatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass
- 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
- 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
- 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
- Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
- Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check StockPower Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
- Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
- Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
- Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
- Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.
Check StockiMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System
- 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
- 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
- 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
- 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
- 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock
M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI
- ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
- If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
- If leakage, please put teflon tape on the male threads of your wand or other products..
- Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
- M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check StockAttwood 93806MUSD7 Mercury Fuel Line Kit, 6 Feet Long, 3/8-Inch Diameter, Multi-Layer Low-Permeation Primer Bulb
- Reliably delivers fuel to your Mercury engine.
- Includes 6-foot-long, 3/8-inch diameter low-permeation fuel line.
- Line is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
- Comes with tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6.
- Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
- Kit is compatible with Ethanol blended fuels.
- For use with Mercury brand engines and tanks.
- Male Universal Sprayless Connector (USC) tank fitting included.
Check StockSUSPA C16-04270 Gas Spring (set of 2)
- Package Content: 5Pcs x Gas Spring End Fitting.
- Gas Spring Strut Joint connector End Fitting..
- It is a good replacement of gas springs Ball Strut, and the gas springs are motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check StockPolaris Ranger Fuel Line Assembly, Genuine OEM Part 2521226, Qty 1
- Durable, flexible, long lasting fuel line.
- Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight..
- Includes quick disconnect fitting at engine end and 1/4" NPT threaded fitting at the fuel tank end..
Check StockFlexzilla Polyurethane Recoil Hose 1/4 in x 15 ft ZillaGreen - LP1415AFZ
- EXTREMELY FLEXIBLE - All weather flexibility (-40° to 165°F) resists kinks and coils easily.
- EXTREMELY DURABLE - The polyurethane construction of the recoil hose will not brittle over time Polyurethane is more flexible than nylon, and has....
- TANGLE-FREE RECOIL - Polyurethane has better recoil memory than nylon, and will not tangle when done with use. Polyurethane is also more flexible than....
- 120 POUNDS PER SQUARE INCH - Maximum working pressure at 70 degrees F. Product Dimensions - 180 x 0.25 inches.
- REUSABLE END FITTINGS - 1/4 in. MNPT reusable ends. Tool End: 16 in. tail with swivel fitting. Compressor End: 8 in. tail with rigid fitting.
Check StockFlexzilla Polyurethane Recoil Air Hose, 1/4 in. x 10 ft, ZillaGreen - LP1410AFZ
- EXTREMELY FLEXIBLE - All weather flexibility (-40° to 165°F) resists kinks and coils easily.
- EXTREMELY DURABLE - The polyurethane construction of the recoil hose will not brittle over time Polyurethane is more flexible than nylon, and has better recoil memory. Safety factor-3:1.
- TANGLE-FREE RECOIL - Polyurethane has better recoil memory than nylon, and will not tangle when done with use. Polyurethane is also more flexible than nylon.
- 120 POUNDS PER SQUARE INCH - Maximum working pressure at 70 degrees F.
- REUSABLE END FITTINGS - 1/4 in. MNPT reusable ends. Tool End: 16 in. tail with swivel fitting. Compressor End: 8 in. tail with rigid fitting.
Check Stockattwood 93806ELP7 Fuel Line Kit — for Johnson and Evinrude Engines, 6 Feet Long, 3/8-In. Diameter, with Hose Fittings
- Reliable replacement for original equipment.
- For Johnson and Evinrude engines and tanks.
- Includes 6-foot-long, 3/8-In. diameter fuel line.
- Includes two (2) 8889LP6 hose fittings for tank end and engine end.
- For use with Johnson/Evinrude brand engines and tanks.
- Male Universal Sprayless Connector (USC) tank fitting not included.
- Female 8889LP6 hose tank fitting included.
Check StockSpears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket
- 【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
- 【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
- 【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
- 【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
- Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
- 【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..
Check Stock
