Reviews Firestone Rubbergard Epdm Roofing

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

Dicor Corp. 402-PR RV Trailer Camper Sealants Patch-It Roof Repair Kit

  • Use To Repair Punctures/ Tears And Breaks On EPDM (Ethylene Propylene Diene Monomer) Rubber/ TPO (Thermoplastic Olefin Plastic)/ Metal/ Plastic And Fiberglass Roofs.
  • With 9 Inch x 10 Inch EPDM (Ethylene Propylene Diene Monomer) Rubber Patch And Tube Of Dicor Lap Sealant.
  • Easily Repair Punctures, Tears, And Breaks.
  • Kit Includes A Peel-And-Stick EPDM Rubber Patch And A Tube Of Lap Sealant.
  • Quite Versatile By Design, It Can Be Used To Patch EPDM Rubber, Most TPO Plastic, Metal And Fiberglass Roofing.
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

DEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite

  • Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
  • Continuous Service Temperature Ranges of -58F to 239F (EPDM).
  • Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
  • Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock