Reviews Fire Resistance Gypsum Board

Pegau Gypsum Board Cutter, Handheld Cutting Tool ABS Shell with 5 Meter Tape for Woodworking

  • LOCKING FUNCTION: The gypsum board cutter supports sliding down to lock and fix, with precise balance, efficient and convenient operation for cutting..
  • WITH TAPE MEASURE: This cutting tool comes with 5 meter tape measure, adds a measuring function, which ensures more accurate cutting and painting..
  • ACCURATE POSITIONING: Equipped with pencil, usually used with cutting tool, supports precise positioning, can be used to draw straight line and circle, etc..
  • WIDE APPLICATION: This woodworking cutting tool is mainly used for cutting gypsum board, foam board, KT board, cardboard and other materials..
  • EXCELLENT MATERIAL: The portable cutting tool is made of ABS material, with good toughness, impact and wear resistance, and has a long service life..
Check Stock

Drywall Lift,11Ft Drywall Lift Panel Hoist Jack Lifter Lockable Rolling Caster Drywall Lifter Construction Tools for Ceiling,Red

  • 12-PACK CASE - Individually packaged in case box with a Plastic Knife in each pack.
  • RATED FOR USE IN FIRE WALL CONSTRUCTION IN USA AND CANADA By Intertek Testing Service ETL For One And Two Hour Firewall Construction With Fire Rated Gypsum Board..
  • EASY MUDLESS APPLICATION - Finish a Firewall Without Mud - Permanent Adhesion To Drywall Without Mud/Compound.
  • APPROVED FOR WALLS AND CEILINGS - One tape for all fire tape applications.
  • WORKS WITH BOTH WOOD AND STEEL BEAM CONSTRUCTION - All purpose fire tape.
Check Stock

Hollow-Wall Anchors ，Drywall Anchor kit with Screws, Self-Drilling Hollow Wall Anchor, Grey, 65Lbs (Anchor 50pcs+Screw 50pcs)

  • 【MATERIAL】The plastic material anchors are very durable and not easy to be broken, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas..
  • 【Application】Drywall self-drilling screws kit is suitable for gypsum board, benzene board, decorative panel, asbestos board, hollow board solid board, etc. for curtain installation, lamp installation, object fixing, cross stitch, picture frame, ornaments, art pendant installation, etc..
  • 【Structure】 When tightening the screw, the gap in the ribbed anchor is expanded on two opposite sides to increase the fixing force. The anti-rotation structure design of the expansion sleeve will not follow the tightening of the screw when the drill is rotating.The drywall anchors and screws kit can expand strongly in all hollow environments..
  • 【Easy to install】 Best Quality Drywall Anchors, Pre-drills precise hole in gypsum wall board - No hole preparation required,Starts easier than other self-drilling drywall anchors..
  • 【PLEASE READ】Product includes a 60-day money-back and 12-month worry-free guarantee! Please kindly contact us once you get trouble with our product. We are committed to providing you with the best service..
Check Stock

E-outstanding 10pcs M4x60mm Hollow Wall Anchors Molly Bolts/Metal Cavity Anchor/Cavity Fixing Anchor for Secure Drywall, Sheetrock, Plaster

  • Package included:10pcs Hollow Wall Anchor Screws. Size: M4x60mm..
  • Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and security..
  • Material: Made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • Application: Widely used in drywall, hollow block, plaster, tile, gypsum cardboard, gypsum fiberboard, fiber cement board, partition walls,etc..
  • Easy to use, high strength and hardness. Expands when screw is tightened to grip against the wall..
Check Stock

HORUSDY Hole Saw Set, Hole Saw Kit with Saw Blades 6

  • Made of high-quality carbon steel with heat treatment and blackening treatment, which has the advantages of high performance, oil resistance, rust resistance, durability and long life..
  • Hole saw kit includes 13pcs saw blades, the maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand..
  • High-density sharp sawtooth, cutting faster and cleaner. Ideal for cork, plastic board, gypsum board and thin PVC board. This product is not suitable for hard metal, hardwood and MDF..
  • Hole saw kit comes in a sturdy box for easy storage and organization. Easy to carry. Designated slots in the case keep every piece in place, Improve work efficiency.
  • Hole Saw Set Includes 13 x Hole Saw Blades, 2 x mandrels, 2 x drill bits, 1 x hex key, 1 x installation plate, 1 x Storage Box..
Check Stock

VCT 21PC Hole Saw Kit Drill Bit Set 3/4\ - 6\ Saw Blades Wood PVC

  • Made of high-quality carbon steel with heat treatment and blackening treatment, which has the advantages of high performance, oil resistance, rust resistance, durability and long life..
  • Hole saw kit includes 13pcs saw blades, the maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand..
  • High-density sharp sawtooth, cutting faster and cleaner. Ideal for cork, plastic board, gypsum board and thin PVC board. This product is not suitable for hard metal, hardwood and MDF..
  • Hole saw kit comes in a sturdy box for easy storage and organization. Easy to carry. Designated slots in the case keep every piece in place, Improve work efficiency.
  • Hole Saw Set Includes 13 x Hole Saw Blades, 2 x mandrels, 3 x drill bits, 1 x hex key, 2 x installation plate, 1 x Storage Box..
Check Stock

Zinc Self-Drilling Drywall Anchors with Stainless Steel Screw Kit Heavy Duty Metal Wall Anchors and #8 x 1-1/4 Inches Screws 80 Pieces in Total

  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 50 pounds..
  • They are easy to take out and convenient to store when in use..
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load..
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance..
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard..
Check Stock

400PCS #6 Flat Head Drywall Screws Assortment Quality Carbon Steel Sharp Point Self Tapping Screws Set for Sheetrock Wood Furniture Cabinet | by IMSCREWS

  • ...)—80pcs, #6 x 1''(25mm) —70pcs, #6 x 1-1/4''(30mm)—60pcs, #6 x 1-3/8"(35mm)—50pcs, #6 x 1-5/8''(40mm)—50pcs, #6 x 2''(50mm) —30pcs, #6 x 2-3/8"(60mm) —30pcs, #6 x 2-3/4"(70mm)—30pcs..
  • ⭐DURABLE & STURDY: Made of a high quality carbon steel and Black Oxide Finish. Improve the Ability of Corrosion Resistance and Anti Resistance. They are high strength and will not deform or break under normal use. The aggressive screw twist pattern allows you to drive them fast and to complete your project efficiently and quickly..
  • ⭐SPECIAL FEATURE: Black coarse thread, sharp point, Bugle head Phillips drive, durable strong metal steel screws, coarse drywall screws feature coarse threads to secure gypsum board to studs..
  • ⭐WILDELY APPLICATION: Drywall sheetrock screws are used to attach wood to wood and when installing gypsum board to wood studs. They have a sharp point to pierce through drywall, and a coarse thread design to help grab into wood studs. With sharp points for self-tapping into wood, furniture and mild steel. Typical uses are for installing dry wall /sheetrock, repairing wood furniture and cabinets. These screws can be used on a wide variety of materials and are ideal for home, office, and shop use..
Check Stock

Strong-Point 722C Drywall Screws44; 7 x 2-0.544; Box of 244;500

  • Meets ASTM A 510 for carbon steel manufacturing..
  • Meets ASTM C 1002 for attaching gypsum board to wood studs..
  • Material Application - Attaches gypsum board to wood studs..
Check Stock

SNUG Fasteners (SNG444) 5000 Qty #6 x 1-1/4\ Sheetrock Drywall Screws-Bulk Wholesale Lot

  • Black phosphate finish that offers better corrosion resistance than the commonly produced black oxide.
  • Coarse threads to secure gypsum board to studs.
  • Ideal for drywall, wood, and other materials.
Check Stock

135 Qty #8 x 2\ Sheetrock Drywall Screws - Phillips Bugle Head w/Fine Thread (BCP973)

  • Black phosphate finish that offers better corrosion resistance than the commonly produced black oxide.
  • Fine threads to secure gypsum board to light gauge metal studs or hard wood.
  • Package included 135 premium screws - 1 Pound.
  • Ideal for drywall, wood, and other materials.
Check Stock

Gypsum Board Cutting Tool Multifunctional Woodworking Panel Cutter with Tape Measure kt Board Cutting Tool Kit Includes 1 Gypsum Board Cutter, 1 Pencil and 5 Blades

  • Reliable material: the board cutting tool is made of aluminum alloy, TRP plastic, safe, sturdy and durable to use.
  • The 3-in-1 gypsum board cutting machine tool can meet your different needs of measurement, mark and cut, which is convenient for carpentry and home maintenance.
  • Suitable for a variety of materials: the gypsum board cutting tool is very suitable for gypsum board, foam board, KT board, cardboard insulation material, hanging pictures, cutting fabric, plywood and other places, with a wide range of uses.
  • It is also the nice gift choice for friends, famliy and craft lovers on birthdays or other holidays.
  • Package includes: the package comes with a piece of plasterboard cutters, a pencil for recording and 5 pieces extra replaceable blades, totally 7 pieces.
  • The built-in blade storage box will not touch the blade or hurt your hands, improving safety.
  • Save time and effort: the paper cutter is equipped with a tape measured up to 5 meters long, so you can easily grasp and accurately cut the required size.
  • It is also faster and more convenient to draw circles and straight lines.
  • With the strong locking device, you can easily measure and transfer to any material.
  • One measurement, one cutting, fast cutting, no dust.
  • Simple operation: only need to press the....
Check Stock

Drywall Anchors Self Drilling Hollow Wall Anchors with Screws No Pre Drill Hole Preparation Required Nylon Plastic 10x35mm 13x42mm 15x32mm 260 Pieces

  • 【HIGH QUALITY】Drywall anchors self drilling hollow wall anchors made from nylon plastic, screws made from zinc steel, can be used outdoors or in wet environments..
  • 【DETAILED SIZE】10x35mm plastic anchors 10pcs, 13x42mm plastic anchors 60pcs, 15*32mm plastic anchors 60pcs, 8x35mm pan screws 130pcs..
  • 【WIDE APPLICATION】Nylon plastic anchors not only use for gypsum wall board, it also use for lightweight concrete, hollow bricks or other softer materials..
  • 【PRODUCT ADVANTAGE】Anchor bolt itself has its own tail tip, which does not require special installation tools or pre-drilling holes on the gypsum board. It can be directly screwed into the gypsum board. The entire installation process is convenient and fast..
  • 【CUSTOMER SERVICE】You are unsatisfied for any reason, return your goods with no questions asked and BUSY-CORNER STORE will provide a full refund..
Check Stock