Reviews Laminated Gypsum Ceiling Board

Hubbell Wiring Systems S3925 Brass Round Floor Box Duplex Flap Single Service Cover, 3.88\ Diameter

  • Sufficient Quantity: you will receive 3 pieces of ceiling light cover plates and 10 pieces of mounting screws, enough quantity that satisfy your daily home use and replacements.
  • Size Information: the diameter of the round junction box cover is about 5 inches, and the distance between the two screw holes is about 3.5 inches, It suitable for 4 inch boxes.
  • The mounting screws measures about 38 mm/ 1.5 inches.
  • Please measure the size you need before placing an order.
  • Decorative Function: blank ceiling plate is designed in a generous round shape, which can be matched with most home decoration styles, and also can be widely applied to decorate some ceiling wire boxes or ceiling fan box covers, especially suitable for hiding box openings or gypsum board and gypsum defects.
  • Simple and Elegant: white ceiling junction box cover is made of quality stainless steel metal material and integrally stamped, which is strong, compact, simple, beautiful, scratch resistant, flame retardant, and high temperature resistant.
  • It can effectively prevent water leakage, so you can use it with confidence.
  • Effortless to Install: each round electrical box cover needs two M3.5 screws, and you just need to use a screwdriver to directly remove or install the screws on the panel.
Check Stock

Metal Ceiling Blank Up Cover 5 Inch White Round Ceiling Cover Plate with 10 Mounting Screws to Cover Round/Octagon Box Openings in Ceilings or Walls (3 Pack, 3.5 Inch Holes Spaced)

  • Sufficient Quantity: you will receive 3 pieces of ceiling light cover plates and 10 pieces of mounting screws, enough quantity that satisfy your daily home use and replacements.
  • Size Information: the diameter of the round junction box cover is about 5 inches, and the distance between the two screw holes is about 3.5 inches, It suitable for 4 inch boxes.
  • The mounting screws measures about 38 mm/ 1.5 inches.
  • Please measure the size you need before placing an order.
  • Decorative Function: blank ceiling plate is designed in a generous round shape, which can be matched with most home decoration styles, and also can be widely applied to decorate some ceiling wire boxes or ceiling fan box covers, especially suitable for hiding box openings or gypsum board and gypsum defects.
  • Simple and Elegant: white ceiling junction box cover is made of quality stainless steel metal material and integrally stamped, which is strong, compact, simple, beautiful, scratch resistant, flame retardant, and high temperature resistant.
  • It can effectively prevent water leakage, so you can use it with confidence.
  • Effortless to Install: each round electrical box cover needs two M3.5 screws, and you just need to use a screwdriver to directly remove or install the screws on the panel.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ...made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
Check Stock

cSeao 22 Pieces Heavy Duty Drywall Ceiling TV Anchors Toggle Bolt Assortment Kit, 1/8\ 1/4\ 3/16\ Spring Loaded Hollow Wall Inserted Bolt Wing Nuts

  • - Product name: Spring Ceiling TV Anchors Bolts wing Nuts Kit.
  • - Can be used for a wide range of hollow wall and mounting parts thickness, product suitability.
  • - Easy to install with a regular Phillips screwdriver.
  • - Fold the expansion arm to insert the hole, no need to unscrew the screw, the installation is simple, the expansion arm automatically spreads behind the hollow substrate, forming a large radius and large area contact, providing a reliable anchoring effect.
  • - suitable for installing lamps / curtain rods / photo frames / coat racks / power switches and other light-loaded objects Can be used for hollow brick / gypsum board / cement fiber board / wood board and other hollow substrates.
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Power Pro 48610 Wood Screws, #9 x 2-1/2\

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

Zinc Self-Drilling Drywall Anchors with Stainless Steel Screw Kit Heavy Duty Metal Wall Anchors and #8 x 1-1/4 Inches Screws 80 Pieces in Total

  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 50 pounds..
  • They are easy to take out and convenient to store when in use..
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load..
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance..
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard..
Check Stock

Strong-Point 722C Drywall Screws44; 7 x 2-0.544; Box of 244;500

  • Meets ASTM A 510 for carbon steel manufacturing..
  • Meets ASTM C 1002 for attaching gypsum board to wood studs..
  • Material Application - Attaches gypsum board to wood studs..
Check Stock

Deck Screw Gun, Drywall Screw Gun, Automatic Screw Spike Chain Drill Screw Chain Adapter for Electric Drill Attachment

  • 【Flexibility】The screw length can be adjusted. Screws of different lengths need to be adjusted by selecting the corresponding nozzle length rotary button. Adjustable depth, suitable for most cordless drills.
  • 【Adjust Depth】Adjust the screw depth by turning the wheel up or down. Adjust the lighter screw upward and the deeper screw downward.
  • 【Wide Application】The drywall screw gun is installed on an electric drill and can be used for household ceilings, kitchen cabinets, etc. Screw fixation of gypsum board, partition wall, wooden board, suspended ceiling and other boards.
  • 【Perfect Design】This is a very lightweight drill, designed in line with ergonomics, comfortable to hold, saving time, and you will feel that work becomes easier.
  • 【Large Quantity】The chain can hold 50 screws. One purchase can be used for a long time, meeting most of your work needs.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Pegau Gypsum Board Cutter, Handheld Cutting Tool ABS Shell with 5 Meter Tape for Woodworking

  • LOCKING FUNCTION: The gypsum board cutter supports sliding down to lock and fix, with precise balance, efficient and convenient operation for cutting..
  • WITH TAPE MEASURE: This cutting tool comes with 5 meter tape measure, adds a measuring function, which ensures more accurate cutting and painting..
  • ACCURATE POSITIONING: Equipped with pencil, usually used with cutting tool, supports precise positioning, can be used to draw straight line and circle, etc..
  • WIDE APPLICATION: This woodworking cutting tool is mainly used for cutting gypsum board, foam board, KT board, cardboard and other materials..
  • EXCELLENT MATERIAL: The portable cutting tool is made of ABS material, with good toughness, impact and wear resistance, and has a long service life..
Check Stock

Gypsum Board Cutting Tool Multifunctional Woodworking Panel Cutter with Tape Measure kt Board Cutting Tool Kit Includes 1 Gypsum Board Cutter, 1 Pencil and 5 Blades

  • Reliable material: the board cutting tool is made of aluminum alloy, TRP plastic, safe, sturdy and durable to use.
  • The 3-in-1 gypsum board cutting machine tool can meet your different needs of measurement, mark and cut, which is convenient for carpentry and home maintenance.
  • Suitable for a variety of materials: the gypsum board cutting tool is very suitable for gypsum board, foam board, KT board, cardboard insulation material, hanging pictures, cutting fabric, plywood and other places, with a wide range of uses.
  • It is also the nice gift choice for friends, famliy and craft lovers on birthdays or other holidays.
  • Package includes: the package comes with a piece of plasterboard cutters, a pencil for recording and 5 pieces extra replaceable blades, totally 7 pieces.
  • The built-in blade storage box will not touch the blade or hurt your hands, improving safety.
  • Save time and effort: the paper cutter is equipped with a tape measured up to 5 meters long, so you can easily grasp and accurately cut the required size.
  • It is also faster and more convenient to draw circles and straight lines.
  • With the strong locking device, you can easily measure and transfer to any material.
  • One measurement, one cutting, fast cutting, no dust.
  • Simple operation: only need to press the....
Check Stock

Drywall Anchors Self Drilling Hollow Wall Anchors with Screws No Pre Drill Hole Preparation Required Nylon Plastic 10x35mm 13x42mm 15x32mm 260 Pieces

  • 【HIGH QUALITY】Drywall anchors self drilling hollow wall anchors made from nylon plastic, screws made from zinc steel, can be used outdoors or in wet environments..
  • 【DETAILED SIZE】10x35mm plastic anchors 10pcs, 13x42mm plastic anchors 60pcs, 15*32mm plastic anchors 60pcs, 8x35mm pan screws 130pcs..
  • 【WIDE APPLICATION】Nylon plastic anchors not only use for gypsum wall board, it also use for lightweight concrete, hollow bricks or other softer materials..
  • 【PRODUCT ADVANTAGE】Anchor bolt itself has its own tail tip, which does not require special installation tools or pre-drilling holes on the gypsum board. It can be directly screwed into the gypsum board. The entire installation process is convenient and fast..
  • 【CUSTOMER SERVICE】You are unsatisfied for any reason, return your goods with no questions asked and BUSY-CORNER STORE will provide a full refund..
Check Stock