Reviews Fep Polyimide Film

Siraya Tech 2 Pcs NFEP Film - A4 Size (210 X 297mm) Better Durability Fewer Layer Lines Accurate Print Results Great for Resin Printing Better Performance Over FEP for LCD DLP 3D Printers

  • Higher Print Success - Siraya Tech NFEP Film is an upgraded version of the FEP film. It is made of stronger materials and can create more accurate and smooth prints. It greatly improves the success rate of printing. Siraya Tech NFEP Film is very suitable for resin printing and has better performance than FEP film..
  • Better Durability - Siraya Tech NFEP Film allows users to print out high-quality 3D models multiple times without changing the film frequently. Siraya Tech NFEP Film is more durable and long-lasting than traditional FEP film..
  • Fewer Layer Lines - Siraya Tech NFEP Film has a higher-quality surface than FEP film so that the generated print model does not have too many serious layer lines, and more high-quality models can be printed..
  • Accurate Print Results - Siraya Tech's high-quality NFEP film was originally developed for laser SLA printers and large-format MSLA. Its peeling performance is better than standard FEP film, and more accurate printing results can be obtained..
  • Faster Print Speed - Siraya Tech NFEP Film is faster than ordinary FEP film printing models because our NFEP Film has ultra-high ultraviolet light transmittance, which can allow an appropriate amount of ultraviolet curing..
Check Stock

LANKEGU 3 PCS nFEP Film 260x200x0.127mm NFEP Film Sheet, nFEP(PFA) Release Film fo ELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch LCD Resin 3D Printers

  • NFEP film is big improvement over traditional fep film: Better durability, fewer layer lines, accurate print results, Great for Resin Printing..
  • High print success rate: NFEP Film offers excellent peel performance over standard FEP film. As such you will have much less failed prints as compared to using FEP films, and prints don't stick to nfep nearly..
  • High transmittance: The 3D release nfep film has high transmittance, and the transmittance is over 95%, which makes the printed products more perfect and provides product quality..
  • Easy to install, thinner than fep: simply follow the instructions comes with the package, you can easily replace the NFEP film in a few minutes. (NOTE: NFEP is softer than standard FEP and thus easier to scratch.Please use caution when installing and cleaning.).
  • NFEP Film is the best choice for printing a perfect model: 260*200*0.127mm nFEP(PFA) Release Film fit fo rELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch resin 3D Printers..
Check Stock

5PCS FEP Film 260x200x0.15mm, Release Film for Anycubic Photon Mono X 6K/ELEGOO Saturn/phrozen Sonic Mighty 4K/ 8.9 inch UV 3D Printer

  • 【Compability】Suitable for Anycubic Photon mono X/Photon S/ELEGOO Saturn/Creality LD-002H/QIDI Technology S Box and other 8.9 inch UV 3D printers..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..
Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

  • HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
  • WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
  • HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
  • HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..
Check Stock

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

  • 【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..
Check Stock

4 PCS Film Heater, Icstation PI Heating Film 12V 7W Adhesive Polyimide Heater Plate 25mmx50mm

  • 【Fast Preheating Speed】Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable..
  • 【Extremely Thin】Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments..
  • 【Safe to Use】Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance..
  • 【Durable】Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process..
  • 【12V Polyimide Heater Film】 Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100℃..
Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.
Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

  • Fluorinated Ethylene Propylene (FEP) Film.
  • It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.
Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

  • 【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
  • Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
  • 【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
  • 【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • 【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..
Check Stock

Calorbot 5 PCS FEP Film 200x260x0.15mm for Anycubic Photon Mono x 6k 4k/Elegoo Saturn MSLA Mono/QIDI Tech S Box/ 8.9 9.25 inch LCD UV 3D Printers

  • Fep Film Size & Wide Compatibility: (200x260mm.
  • Quantity: 5 PCS) FEP Release Film for Elegoo Saturn, Anycubic Photon Mono x 6k 4k, 8.9 inch UV 3D Printers, MSLA Mono, qidi tech s-box, Anucubic Photon..
  • Peeling Force: good peeling performance, meet the release requirement of various products, can be reused..
  • High transparency: UV transmittance is over 95%, which is perfect for printing and provides product quality..
  • Corrosion resistance: not affected by almost any strong acid, strong alkali, oxidant, and other solvents, Non-tacky, high cleanliness product surface provides product release and durability..
  • Easy to install and use: it is very easy to install according to the installation instructions. If you are not satisfied with our Fep Film Or service, we guarantee a full refund. Please Feb assured to buy..
Check Stock

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

  • ...r all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono SE, Photon S, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
  • High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
  • High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..
Check Stock

MG Chemicals - POL100-15 Polyimide Tape for 3D Print Beds, High-Temperature, 4' Width x 49' Length

  • Superior quality Polyimide tape for 3D printing of ABS Filaments. Use for multiple prints before having to change the tape..
  • High temperature tape for filaments requiring heated build beds.
  • Apply an ABS Slurry to the tape so your ABS prints stick to the heated bead..
  • Polyimide tape has 1 mil of Polyimide film with 1 mil of silicone adhesive.
Check Stock