Reviews Fan Blade

Harbor Breeze 5-Pack White Ceiling Fan Blade Arms

  • EASY REPLACEMENT: The Dysmio Fan Blade Arms are the best choice to replace your worn and broken fan blades arms on your existing ceiling fan. Using the best quality material, the Blade Arms are lighter and stronger than most compatible products available in the market.
  • WELL BALANCING: Wobbling of the fan will lead to wear and tear of the motor, reducing the life of the fan drastically. Each 5-piece Dysmio Fan blade Arm set is accurately matched in weight and increases the performance of your Ceiling Fan by eliminating the problem of unbalanced Fan blade arms..
  • POPULAR FINISH: The Ceiling Fan Blade Arms comes in White finish. The Light tone is assured to complement any décor and goes well with the majority of Fans in a Light color finish. The finish not only adds simplicity to your fan but also redecorates it with its beauty..
  • SUITED FOR 42-INCHES: The Replacement fan blades are compatible with most 42-inch fans. The Arms are designed taking into consideration fan blade outer holes width, outer hole to center hole width and fan motor holes width. The mounting hardware also comes included to avoid a run to the hardware store..
  • EASY INSTALLATION: The holes fit into positions for the fan blades and fan. The lightweight of the Arm helps in easy handling and ....
Check Stock

Craftmade BCD42-AW Contractor's Standard Fan Blades Replacement 42-Inch, Antique White, Set of 5

  • SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
  • PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
  • EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
  • BEST APPROPRIATE FOR: Most 42-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
  • width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
  • BEAUTIFUL FINISH: This ceiling fan blade is available in Attractive White. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..
Check Stock

OhLectric OL-45392 Ceiling Replacement Fan Blade Arms - Perfect for Fitting With 52 Inch Fan Blades - Easy Installation - Mounting Instruction Hardware Included - Brushed Nickel Arms - Set of 5

  • SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
  • PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
  • EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
  • BEST APPROPRIATE FOR: Most 52-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
  • width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
  • BEAUTIFUL FINISH: This ceiling fan blade is available in Brushed nickel. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..
Check Stock

OHLECTRIC Ceiling Replacement Fan Blade Arms - Perfect for Fitting With 42 Inch Fan Blades - Easy Installation - Mounting Instruction Hardware Included - Antique Brass Arms - Set of 5 - OL-45354

  • SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
  • PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
  • EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
  • BEST APPROPRIATE FOR: Most 42-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
  • width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
  • BEAUTIFUL FINISH: This ceiling fan blade is available in Antique brass. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..
Check Stock

Westinghouse Lighting 7740200 Fan Blade Arm 42 Antique Brass 5 Pack

  • Easily replace worn or broken fan blade arms on your existing fan with this convenient five piece set.
  • Traditional antique brass finish complements many ceiling fans.
  • Replacement fan blade arms are compatible with most 42-inch fan blades.
  • B - fan blade outer hole to center hole 2-5/8-inches.
  • Includes installation instructions and mounting hardware.
Check Stock

Westinghouse Lighting Brushed Nickel Finish 7740900 52-Inch Replacement Fan Blade Arms, Five-Pack, 5 Count

  • Easily replace worn or broken Fan blade arms on your existing Fan with this convenient five piece set.
  • Popular Brushed Nickel finish complements many Ceiling fans.
  • Replacement Fan blade arms are compatible with most 52-inch Fan blades.
  • a - Fan blade outer holes 3-15/16-inches.
  • B - Fan blade outer hole to center hole 2-3/4-inches.
  • Includes installation instructions and mounting hardware.
Check Stock

NuTone S89222000 Motor Assembly 9417 9417D 9427 9427P 9417DN VH9417 VH9427

  • Bathroom exhaust fan replacement: 120 volts, 60Hz, 1A, 50CFM, 3000 Rpm, CCW.
  • UL certification: the bathroom vent fan motor replacement equipped motor and plug with fan blade, stable and practical, continuous duty, air over.
  • Shaft: 3/16 x 1.5 inch with splines, wire length: 6 1/2 inch with 2 prong plug, fan blade: 4 5/8 inch x 1 1/8 inch.
  • Kit contains: 1 x motor, 1 x blower wheel fan blade.
  • Ventilation fan motor and blower wheel replacement are compatible with Nutone Broan 659, 662,....
  • Motor assembly blower wheel: 1 x motor, 1 x blower wheel fan blade.
Check Stock

ZRVTM Ceiling Fan Duster - 100% Microfiber Ceiling Fan Cleaner Fan Blade Cleaner for Cleaning High Ceiling Fan

  • 【Ingenious Design】This ceiling fan dust cover uses a fully wrapped design, which can prevent dust from falling on the furniture and floor below when cleaning the ceiling fan blades. There is NO secondary mess to clean when you are done..
  • 【100% Microfiber】Our ceiling fan duster is made of high quality plush cloth, which is soft and comfortable to the touch. This material of ceiling fan cleaner also has strong adsorption, which can stick all the dust inside the dust cover at one time..
  • 【Easy To Use】Just cover the fan blade cleaner on the fan blade, and then pull the ceiling fan duster with little force to clean the fan blade. This ceiling fan duster can be used both dry and wet, and can be washed with warm water after cleaning..
  • 【Washable & Reusable】Easy to clean the ceiling fan duster cleaner with clean water or warm water or just put it in washing machine. With ceiling fan duster, you can easily solve your troubles and say goodbye to the hard cleaning days in the past..
  • 【Product Dimensions and Specifications】You will get 1 PCS ceiling fan duster. The opening of ceiling fan cleaner can be tightened to accommodate ceiling fan blades up to 24.61 x 8.86 inches. The fan blade cleaner fits most ceiling fan models..
Check Stock

Westinghouse Lighting SL2P 7740600 52-Inch White Finish Replacement Fan Blade Arms Five-Pack 4.38x6.75x1.38 5 Count

  • Easily replace worn or broken fan blade arms on your existing fan with this convenient five piece set.
  • Basic white finish complements many ceiling fans.
  • Replacement fan blade arms are compatible with most 52-inch fan blades.
  • A - fan blade outer holes 3-15/16-inches.
  • B - fan blade outer hole to center hole 2-3/4-inches.
  • Includes installation instructions and mounting hardware.
Check Stock

RV Vent Fan Blade - White 6 Replacement Fan Blade 3/32 0.094 Round Bore RV Fan Blades for Bathroom Roof Vent Range Hood 2 Pack

  • 【12V Power Vent Fan】This rv vent fan blade is replacement blade for 12 voltage power roof vents and range hoods..
  • 【Round Bore Size】This fan blade bore is ROUND and measured 3/32 inch (0.094"), equal to standard RV fan motors' bore axle, pls make sure the bore....
  • 【Compatible Brands】This fan blade is 6 inch large, widely used for ventilations of RV's, campers and trailer, compatible for Elixir, Heng's,....
  • 【Direction of Spin】This fan blade is direct replacement. The finished hub face down, then match the motor shaft recess in. The direction of spin....
  • 【Powerful and Quiet】: Our powerful RV vent fan runs strong to exhaust the residual smell in the bathroom, easy to install & run quietly.
Check Stock

Westinghouse Lighting 7701600, Assorted Screws, 1/2 inches screws, (20 Count)

  • EASY REPLACEMENT: The Dysmio Fan Blades are the best choice to replace your worn and broken fan blades on your existing ceiling fan. Using the best quality Fiberboard material, the ceiling fan Blades are lighter than most compatible products available in the market..
  • WELL BALANCING: Each 5-piece Dysmio Fan blade set is accurately matched to restore balance and increase the performance of your Ceiling Fan. An unbalanced Set of Fan blades will lead to wear and tear of the motor, reducing the life of the fan. The Dysmio ceiling Fan blade set eliminates that problem. Perfect to be used with fans with 5 Blades or less..
  • POPULAR FINISHES: The Ceiling Fan Blades comes in White/Bleached Oak finishes. The Light tones are assured to compliment any décor and goes well with any Ceiling colors, Dark toned or light. The finishes not only renew the appearance of your fan, but also redecorates the room with its subtilty..
  • REVERSIBLE: The Blade angles are designed to direct the air flow in both directions at the same time. This ceiling fan blade is specially designed. to improve the ventilation. Equal pressure helps in driving off air, increasing the circulation. Best results are achieved when same fan blades are used instead of mixing up with a different brand..
Check Stock

89747 | RF59N, RF69N Nutone Roof Vent Motor # 89747 1600 RPM 6.6 amps 120V

  • Bathroom exhaust fan replacement: 120 volts, 60Hz, 1A, 50CFM, 3000 Rpm, CCW.
  • UL certification: the bathroom vent fan motor replacement equipped motor and plug with fan blade, stable and practical, continuous duty, air over.
  • Shaft: 3/16 x 1.5 inch with splines, wire length: 6 1/2 inch with 2 prong plug, fan blade: 4 5/8 inch x 1 1/8 inch.
  • Kit contains: 1 x motor, 1 x blower wheel fan blade.
  • Ventilation fan motor and blower wheel replacement are compatible with Nutone Broan 659, 662, 663, 668, 688, 678, 15617, 162502, 02S0055, 0340775B, 101-1770, 14266A, 15194A, 301-3001, 5KSB33BG1858, C202A, CC0053, CC0154, P-10294, P-14266A, P-15194, P-15617, P-608-31-1, P-9983, S10625002, S10625236, S10625237.
  • Note: the brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Ceoighe.
  • Motor assembly blower wheel: 1 x motor, 1 x blower wheel fan blade.
Check Stock

OhLectric OL-40458 5PCS 20 Inches Fan Blades - Fan Replacement Blades For 52-inch Ceiling Fan - Great Substitution for Broken Blades - High-Performance Ceiling Fan Blades - Indoor Use, Oak/Walnut

  • Easily replace worn or broken fan blade arms on your existing fan with this convenient five piece set.
  • Traditional antique brass finish complements many ceiling fans.
  • Replacement fan blade arms are compatible with most 42-inch fan blades.
  • B - fan blade outer hole to center hole 2-5/8-inches.
  • Includes installation instructions and mounting hardware.
Check Stock