Reviews Engraving Toofor Metals

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • ...pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
  •  【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light source,  marking precious metals hardly consumes precious metals themselves. ENJ....
Check Stock

Dremel 107 Rotary Tool Accessory Engraving Bit- Perfect for Wood, Plastic, Linoleum, and Soft Metal Cutter, 1/8' Shank , Teal

  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • The ball shape of the Engraving bit can be used to make concave cuts or hollows out material. The tip makes round bottom slots and grooves and can be used for rounded side cuts.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • Secure objects to a stable surface while working.
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down.
  • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
Check Stock

4-1/2\ X 1/4\ X 7/8\ FAST Cut ABR

  • Wear resistance,heat resistance,corrosion resistance and easy combination,Small with and practicality..
  • Widely used in precision polishing technology and burring,such as polishing stone, glass, ceramics,gem stones,metals etc..
  • High working efficiency: precision grinding, quick and simple grinding, good grinding effect..
  • Suitable for grinding, polishing, engraving and polishing of various molds, glass, precision equipment and metals..
  • Used for polishing metal, abrasive tools, wood, jade, DIY, etc..
Check Stock

CNC Router Machine 3018 Pro, mcwdoit Simple Assembly Version, Desktop Wood Acrylic Plastic PCB MDF Engraving, 3 Axis with Offline Controller, Mill Bits, Working Area 11.8 * 7.1 * 1.8″

  • Diosun engraving tip is perfect for flat, soft metals, leather, acrylic, plastic, anodized aluminum, and more..
  • The whole set is included Engraving Tip and QuickSwap Housing..
  • The main material to made this engraving tip and housing is premium carbide steel..
  • This product can work on a variety of materials.Its able to make engraved nameplates, decorations, jewelry, monograms and souvenirs..
Check Stock

Silver QuickSwap Engraving Tip for Cricut Maker

  • WHAT YOU GET-Engraving Tip.It has the ability to cut through thicker materials such as fabric or poster board with ease.Which is perfect for Cricut Maker Machines..
  • HIGH QUALITY AND DURABLE-These Engraving Tip are made of premium carbide steel,sharp and durable not easy to rust.It has premium durability and precision..
  • APPLICATION-Perfect for flat, soft metals, leather, acrylic, plastic, anodized aluminum, and more.Able to make engraved nameplates, decorations, jewelry, monograms and souvenirs. Maintain a unique and permanent engrave design.Use with Cricut Maker machines only..
  • EASY TO USE:Super easy to use and you can design with various designs that you prefer!.
  • TIPS-Use with Cricut Maker machines only..
Check Stock

FOLAI Electric Engraving Engraver Pen Carve Tool for DIY Jewellery Jewelry Metal Glass - (Cordless Precision Engraver with Diamond Tip Bit)

  • 【What you will receive】Package comes with 1 piece of etching engraving tool and 2 Color & 7 pieces of blank labels in 7 different shapes, sufficient for your engraving and crafting demands in daily life.
  • 【Nice compatibility】 Engraving tool is compatible with many cutting machines, such as Cricut Joy, which can replace your other engraving tool, bringing you lots of convenience.
  • 【Reliable quality】 Etching tool is made of Tungsten steel and aluminum, sophisticated design，compact and sturdy, not easy to deform or wear, having nice rust prevention performance, its pointed tip can help you carve clear lines and shapes on target items.
  • These stamping blank tags are made of lightweight aluminum, suitable for many DIY projects.
  • 【Blank tags】There are 2 Color & 7 lovely blank stamping tags, they are designed after the shape of dog bones, hearts, circles, stars, fish, ovals, rectangles, which can meet your different preferences and needs.
  • 【Enjoy DIY Fun】You can use these blank labels to make unique handicrafts, such as pet ID cards, necklaces, etc. Specifically, you can engrave names, blessings, flowers, numbers or other blanks on these metals to make them Meaningful and full of your personal style that can bring you a lot of fun.
Check Stock

Triumph Fiber Laser Marking Machine 30w for Permanent Metal Parts Engraver Marker Engraving Rotary jewllery Ring Firearm

  • With rotary attachment which you can work with for any cylinder shape material for engraving.Protection eye goggles included.Foot switch is included.Testing aluminium sheets included..
  • Engraving area 110x110mm and lens 200x200mm as spare.You can engrave all metals,polymer material,aluminum,stainless steel,copper,gun parts....
  • Free maintenance/Lifetime 100000 hours,good support from our servicemen.Operation videos,tutorial videoes,manuals,tools...included..
  • Computer included and Laser software EZCad installed,compatible 64bits or 32 bits computer system,supporting PLT, BMP, DXF, JPG, TIF, AI, PNG, JPG, etc formats,is installed,ready to work.
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • ...y: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, support macbook system (LightBurn)..
Check Stock

NestOne Engraving Tip and Housing | Perfect Tool for Cricut Maker | Bundle Accessories for Engraving Projects

  • PERFECT FOR MAKERS – NestOne engraving tip and housing are perfect for Cricut Maker machines. This tool set is not for Explorers..
  • THE WHOLE SET – It includes an engraving tip and a Quick Swap housing..
  • SMOOTH and ACCURATE – It is made from premium carbide steel and is competent for professional-looking results of different occasions, from dog tags, nameplates, inscribed art and decor, jewelry to monograms, wood carvings, and keepsakes..
  • WORK on A VARIETY of MATERIALS – It can engrave permanent designs on materials such as soft metals, leather, acrylic, wood, plastic, anodized aluminum, and more..
  • A proud member of the NestOne family – Excellent customer experience and no questions return policy with no hassle..
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

Dremel Max Life 115HP 5/16\ (7.9mm) High Performance Rotary Carving Bit, 2-Pack

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life 115HP Carving Bit is coated in Titanium Nitride and is engineered to last 2X longer than the standard, non-coated Dremel 115 carving bit..
  • Carving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
  • Ideal for carving & engraving in a variety of materials including wood, soft metals, or plastic..
  • The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat-bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees..
  • Working Diameter: 5/16" (7.9mm), Shank: 1/8.
Check Stock

PROXXON Rotary Tool MICROMOT 60/EF 28512

  • For drilling, milling, grinding, polishing, brushing, cutting and engraving, for working steel, precious metals, glass, ceramics, plastics, etc..
  • Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, etc..
  • Quick-action chuck and electronic speed control, with feedback effect (high torque at low rpm's).
  • With low safety voltage. Therefore, also suitable for working with coolant (wet grinding and cutting).
  • Scope of delivery: 1x PROXXON Rotary Tool MICROMOT 60/EF including quick-action chuck. Part number: 28512.
Check Stock

Durable and wear-resistant Grinding Head Wheel Outer Diameter Grinding Wheel，10PCS Wool Felt Ceramic Grinding Head Pointed Polishing Sesame Sponge Rubber abrasive Wheel 3mm Shaft Mounted for Rotary To

  • Wear resistance,heat resistance,corrosion resistance and easy combination,Small with and practicality..
  • Widely used in precision polishing technology and burring,such as polishing stone, glass, ceramics,gem stones,metals etc..
  • Tool handle diameter: 1/4 inch (6 mm). Head shape: spherical, conical, cylindrical, 60-degree conical..
  • High working efficiency: precision grinding, quick and simple grinding, good grinding effect..
  • Suitable for grinding, polishing, engraving and polishing of various molds, glass, precision equipment and metals..
Check Stock