Reviews Engine Oil Pump Mounting Bolt

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ... Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

PEGGAS ✦New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Vertical Pump 7/8" Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head - Simpson -Briggs & Stratton -Ryobi

  • ✦ IMPORTANT FITMENT ✦ This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ From main center shaft to each mounting bolt is 4″ – center to center spacing between mounting bolts is: 7 11/16″ – 6 3/16″ – 6 7/16.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS IS MADE FOR A VERTICAL ENGINE WITH A 7/8″ SHAFT ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)..
Check Stock

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
Check Stock

WEIAND FABRICATED OIL PAN KIT,7 QUARTS,GOLD ZINC FINISH,9" DEPTH,REAR SUMP,DRAG RACING,COMPATIBLE WITH 1979-1993 FORD MUSTANG 351W CONVERSION

  • ...nounce their latest release of fabricated oil pan kits for Big Block Chevy, GM LS-engines, Small Block Ford & Mopar B/RB engine applications!.
  • Features: Oil Pan Kit comes complete with the following: application specific oil pan, oil pan gasket, oil pump pickup and pan mounting bolt kit | Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high perfomance engine oil systems fed properly | Gold Zinc Finish | Popular applications for drag race applications.
  • Specs: Application: 1979-1993 Mustang 351W | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: None | Emission Code: 5 | Finish: Gold Zinc Finish | Material: Stamped Steel | Oil Pan Capacity: 7.0 Quarts | Oil Pan Depth: 9.00" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
Check Stock

Youxmoto 3/4" Shaft Horizontal Pressure Washer Pump, Max 3000 PSI @ 2.5GPM, Fit for Karcher K2400HH/ Honda GC190/ Homelite 309515003 308418007 308653057/ PowerStroke ps80903a/ Simpson MSH3125

  • ... 【Easy to Install】: This replacement pump features a threaded M22 connection pressure washer hose outlet, 3/4'' NH garden hose inlet. The standard bolt pattern fits most 3/4'' horizontal shaft gas-powered pressure washers. Packet includes a chemical hose with filter, mounting bolts, shaft key, 5pcs nozzle tips, and instruction manual to get your pressure washer back in life within 10 minuts. (*Fit 3/4'' Horizontal shaft engines ONLY).
  • 【Performance and Quality Upgrades】: One of The Longest Lasting Pressure Washer Pumps on The Market, A high -qualitythermal relief valve with a protective cap keeps the pump working at safe temperature, extend the life of the pump, and protects your safety. The outlet made of brass, not rust, anti-corrosion, Add extra 5 color nozzle tips (0 °, 15 °, 25 °, 40 °, 65 °), making your cleaning work stronger, like house, fences, sidewalks, vehicles, pool etc..
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • 003e Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale and After-Sale Service. The mounting flange provides a convenient connection to most 3/4’’ diameter shaft. If you are not sure your high p....
Check Stock

Autoparts Carburetor Replacement for Generac Guardian 091188A CMV17-B2 091188BESV RV Generator NP-50G

  • Compatibility - Replacement for Carburetor with NP50 Solenoid Carb Kit for Generac Guardian 091188BSV2, 91188B, Generac 091188BESV, 91188A, CMV17-B22, 360RV, Generator Engines..
  • Size Specification - It is 46mm from the center to center of the mounting bolt holes. The diameter of the mounting bolt hole is 6mm..
  • Feature - High quality which means that it is good at mixing fuel and air, keeps your engine running smoothly and prevents engine from lacking of oil or spilling..
  • Package List - 1x Carburetor, 1x Fuel Filter, 2x Gaskets..
  • Notice - Please verify the year/make/model of your vehicle and refer to our detailed fitment information on product description page below..
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer

  • ...00 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

DRIVESTAR M383 Engine Oil Pump 1996-2000 for Honda Civic,1996-1997 Civic del Sol 1.6L

  • Fitment:Oil Pump for Honda Civic 1996 1997 1998 1999 2000 1.6L.
  • Replacement Oil Pump Number:M383,MA-371 oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

Troy Bilt Complete Pump Head Assy for RMW and SRMW Pumps AR42518

  • ...I at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • ...00 PSI at 2.8 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock