Reviews Engine Oil Pump Drive Shaft

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • 003e Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway.
  • 003e Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale a....
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

SurmountWay 3200PSI Pressure Washer Pump Horizontal 3/4" Shaft Replacement Power Washer Pump 2.4 GPM for 309515003,308418007, K2400HH (Horizontal)

  • 【Fit 3/4″ Shaft Horizontal Pumps】Fit Most 3/4″ Shaft Horizontal Crank Pressure Washer Engines, brands including Honda GCV , Generac, Briggs.
  • 【Pressure Washer Pump】Direct drive horizontal axial pump fits most horizontal 3/4″ shaft power washer: Could work at wide range from 2900 to 3200 PSI, best performance at 3000PSI and 2.4GPM. Good replacment for horizontal pressure washer pumps..
  • 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine..
  • 【Easy to Install】When installing, please ensure that the keyway is installed before running your pressure washer..
  • 【Sale and After-Sale Service】The provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, we would like to service you..
Check Stock

Youxmoto 3/4" Shaft Horizontal Pressure Washer Pump, Max 3000 PSI @ 2.5GPM, Fit for Karcher K2400HH/ Honda GC190/ Homelite 309515003 308418007 308653057/ PowerStroke ps80903a/ Simpson MSH3125

  • ...essure than standard original pumps, perfect match for horizontal pumps with 3/4" shafts, impossible be outdone by so-called Replacemnet Pump. Improved 3000 PSI X 2.5 GPM performance is The best Choice For Your Replacement Needs! Don’t Sacrifice Quality For a Cheaper Price. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【COMPATIBALE】: Replacement for ►HONDA GC190, GC135, GX140,GX160 (GC160 with 3/4" keyway shaft). ►SIMPSON: MSH3125, MSH3125-S, MSH3224, 90029, 90028. ►Troy-Bilt: 020241, 020241-1, 20242. ►Homelite 308418007, 309515003, 308418004, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ►Karcher: G3050OH, K2400HH, G2400HH. ►POWERSTROKE PS80522, PS80903B ►GENERAC 308418007, 580.762011, 01675..
  • 【Quick Start & Maintenance-Free】: Quick cold starts to make the startup a breeze & Built in for simple & Clean dust in one step, no need to adjust pressure before starting engine. This pump pre-fill oil for lifetime, so you never have to change the oil. Manufactured from fully die-cast aluminum for good against corrosion..
  • 【Easy to Install】: This replacement pump features a threade....
Check Stock

Ace Pumps FMC-150F-HYD-206 Hydraulic Driven Centrifugal Pump, Flanged, for Open Center Systems Up to 16 GPM (60.6 LPM), 1-1/2" x 1-1/4"

  • MOUNTING VERSATILITY: The location of the pump is not tied to the PTO or engine drive shaft.
  • the pump can be mounted in a variety of locations to suit application requirements.
  • Customized Performance: A hydraulic driven pump can produce higher pressures than PTO or belt driven pumps.
  • EASY MAINTENANCE: On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement.
  • All pumps are equipped with easily replaceable Viton mechanical seals.
  • They can hold constant pressure at varying engine speeds on closed center hydraulic systems.
Check Stock

JDMSPEED New HEI Red Cap Distributor Replacement For Ford FE V8 Engines 65000 Volt 352 360 390 427 428

  • THESE DISTRIBUTORS ARE FOR THE "FE" BLOCK ENGINES THAT USE THE 1/4" OIL PUMP DRIVE SHAFT.
  • THESE WILL NOT WORK FOR INDUSTRIAL "FE" ENGINES THAT USE THE 5/16" OIL PUMP SHAFT.
  • This is a must for those wishing to upgrade the ignition system to a HEI.
  • Please see below description for more details.
Check Stock

Northstar Gas Cold Water Portable Pressure Washer Power Washer - 4200 PSI, 3.5 GPM, Honda Engine, Model Number 157127

  • Honda GX390 OHV engine for quiet, reliable performance.
  • CAT 66DX direct drive crankshaft triplex pump with thermal protection and ceramic plungers.
  • Oil drain cutouts for quick, clean engine and pump oil changes.
  • Easy Start prevents pressure buildup for smoother, easier recoil pulling.
  • Adjustable pressure allows easy control of the PSI to suit any job.
Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
  • ②DETAILS: Model: 4.0 horsepower jet pump.
  • Refueling method: No. 92 unleaded gasoline is recommended..
  • ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
  • Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
  • Recommended engine oil: four-stroke engine oil.
  • ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
  • Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
  • The fuel tank of the four-stroke outboard engine can only be filled with....
Check Stock

TOOLCY 3/4" Shaft Horizontal Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM - Power Washer Pump for Gas Washer - Replacement Pump for Honda, Simpson, Ryobi etc.

  • ...UMP】 Horizontal Power Washer Pump 3/4" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, Our replacement pump operation time is 150 hours, (50 hours longer than the market), so that you can save money for replace pressure washer accessories and time.Top performance at 2600-3100 PSI and fit most 208-240cc 6.0HP-8.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more..
  • 【EFFICIENT WORK】Come with 3 special test matched nozzle tips (0°/25°/soap) for best cleaning performance.If you need a higher pressure cleaning pump, it is equipped with a larger 3100 PSI / 2.5 GPM flow rate to complete the cleaning job more efficiently, allowing you to easily start cleaning in more scenarios (eg. garden, house, car, road etc). ⚠ Will not fit 7/8 inch shaft gas engine..
  • 【SAVE WORRY】 It is made of die cast aluminum with deep surface treatment to prevent rust, the pump is maintenance-free crankcase, so there is no need for a lifetime of pre-filling gear oil, no oil change. Simply Replace it and Revive your Pressure Washer! We long for help you save more energy and time, this upgraded pressure pump will be your best choice.※►Diagonal distance betwee....
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

EVAR V8 Engine Model Kit That Works for Adults, V8 Engine Internal Combustion Engine Model DIY Assembly Kit for AX90104 SCX10 Capra VS4-10 Pro/Ultra Model Car

  • Design: V8 internal combustion engine structure and principle design, pulley winding drive structure, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, screw near and far valve intake manifold, oil pan structure, power drive plate plug interface..
  • Performance: based on pre colored products, users need to install. The V8 engine model can simulate electric operation. At the same time, considering the stability and reliability of operation, we made a full bearing structure of the drive part in a small space..
  • Application: Analog V8 engine is applicable to many RC models, such as AX90104, SCX10, Capra, VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a good decoration, which can exercise the ability to assemble and restore the V8 engine..
  • Tip: This engine kit does not include a bracket. You can select the corresponding engine bracket according to your model. The engine and bracket are sold at the same time..
Check Stock