Reviews Engine Oil Pump Balance Shaft

DNJ EK224M Master Engine Rebuild Kit for 1998-2001 / Honda/Prelude / 2.2L / DOHC / L4 / 16V / 2156cc / H22A4

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Timing Belt, Timing Belt Balance Shaft, Oil Pump.
  • FITS: 98-01 Honda / Prelude 2.2L L4 DOHC Naturally Aspirated H22A4.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK1105M Master Engine Rebuild Kit for 2002-2003 / Dodge, Jeep/Liberty, Ram 1500/3.7L / SOHC / V6 / 12V / 226cid / VIN K

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Balance Shaft Bearing Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
  • FITS: 02-03 Dodge, Jeep / Ram 1500, Liberty 3.7L V6 SOHC Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit Engines w/ Stamped Steel Valve Covers, Master Kit, w/ Steel Valve Covers.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • 003e Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway.
  • 003e Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale a....
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

Youxmoto 3/4" Shaft Horizontal Pressure Washer Pump, Max 3000 PSI @ 2.5GPM, Fit for Karcher K2400HH/ Honda GC190/ Homelite 309515003 308418007 308653057/ PowerStroke ps80903a/ Simpson MSH3125

  • ...essure than standard original pumps, perfect match for horizontal pumps with 3/4" shafts, impossible be outdone by so-called Replacemnet Pump. Improved 3000 PSI X 2.5 GPM performance is The best Choice For Your Replacement Needs! Don’t Sacrifice Quality For a Cheaper Price. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【COMPATIBALE】: Replacement for ►HONDA GC190, GC135, GX140,GX160 (GC160 with 3/4" keyway shaft). ►SIMPSON: MSH3125, MSH3125-S, MSH3224, 90029, 90028. ►Troy-Bilt: 020241, 020241-1, 20242. ►Homelite 308418007, 309515003, 308418004, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ►Karcher: G3050OH, K2400HH, G2400HH. ►POWERSTROKE PS80522, PS80903B ►GENERAC 308418007, 580.762011, 01675..
  • 【Quick Start & Maintenance-Free】: Quick cold starts to make the startup a breeze & Built in for simple & Clean dust in one step, no need to adjust pressure before starting engine. This pump pre-fill oil for lifetime, so you never have to change the oil. Manufactured from fully die-cast aluminum for good against corrosion..
  • 【Easy to Install】: This replacement pump features a threade....
Check Stock

TOOLCY 3/4" Shaft Horizontal Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM - Power Washer Pump for Gas Washer - Replacement Pump for Honda, Simpson, Ryobi etc.

  • ...UMP】 Horizontal Power Washer Pump 3/4" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, Our replacement pump operation time is 150 hours, (50 hours longer than the market), so that you can save money for replace pressure washer accessories and time.Top performance at 2600-3100 PSI and fit most 208-240cc 6.0HP-8.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more..
  • 【EFFICIENT WORK】Come with 3 special test matched nozzle tips (0°/25°/soap) for best cleaning performance.If you need a higher pressure cleaning pump, it is equipped with a larger 3100 PSI / 2.5 GPM flow rate to complete the cleaning job more efficiently, allowing you to easily start cleaning in more scenarios (eg. garden, house, car, road etc). ⚠ Will not fit 7/8 inch shaft gas engine..
  • 【SAVE WORRY】 It is made of die cast aluminum with deep surface treatment to prevent rust, the pump is maintenance-free crankcase, so there is no need for a lifetime of pre-filling gear oil, no oil change. Simply Replace it and Revive your Pressure Washer! We long for help you save more energy and time, this upgraded pressure pump will be your best choice.※►Diagonal distance betwee....
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

Pressure Washer Pump Replacement, 7/8'' Shaft Vertical Pressure Washer Pump, Power Washer Pumps Replacement, 2400-2800PSI Pumps Replacement for Pump Pressure Power Washer

  • · Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
  • · Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
  • · Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
  • · Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....
Check Stock

COOCHEER 2 in 1 Gas Powered Weed Eater Straight Shaft Weed Trimmer Wacker String Trimmer and Brush Cutter with 2 Detachable Heads and Multiple Accessories for Trimming Lawn Grass Weed

  • 42.7cc high output engine with professional 2-cycle engine for powerful power. Strike a balance between high performance and user experience..
  • A translucent fuel tank allows you to visually monitor your fuel level as you work. External Manual Oil Pump, supply sufficient fuel faster by....
  • Effortless and reliable starting system reduces the amount of pull force required for fast. Comes with an Extra starter cords and spark plugs for....
  • Ergonomic trigger soft grip handle Assemble the handles on the upper shaft to reduce vibration during work and increase efficiency..
  • This gas weed trimmer is equipped with various accessories: 2 cutting heads, an extra start pull rope and an extra spark plug for replacement, a....
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ...re even for washing your car or other things without being afraid to damage the paint!.
  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
Check Stock

OCPTY Timing Belt Kit Including Timing Belt Water Pump with Gasket tensioner Bearing etc, Compatible for 1997 1998 1999 Acura CL/1994 1995 1996 1997 1998 1999 2000 2001 2002 Honda Accord

  • TIMING BELT KIT FITMENT – Fit for 1997 1998 1999 Acura CL/1994 1995 1996 1997 1998 1999 2000 2001 2002 Honda Accord/1998 Honda Odyssey/1998 1999 Isuzu Oasis,please confirm this item fits for your vehicle before purchasing by checking fitment chart above or contact us..
  • Functions and advantages – The air distribution structure of the driving engine enables the engine to properly open and close at the time of intake and exhaust, which ensures that the engine cylinder can be opened and closed normally, with low noise of gauge belt, low transmission resistance and longer service life..
  • TIMING BELT KIT INCLUDE – 1 Timing Belt (112 round teeth),1 Balance Shaft Belt ( 70 teeth),1 Timing Belt Tensioner,1 Balance Shaft Tensioner,1 Camshaft Seal,1 Crankshaft Seal,1 Water Pump with Gasket. (As the picture shown).
  • TIMING BELT SET WARRANTY – 100% tested for performance and durability by factory and 1-year warranty is provided/offered.Please contact us first if you have any questions..
  • NOTE – These belts are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit..
Check Stock

YAMATIC Horizontal Pressure Washer Pump 3/4\ Shaft - Max 3300 PSI @ 2.5 GPM - Original Engineering for Most Brand gas engine power washer

  • PERFORMANCE and DURABILITY upgrade - Industry engineering process designed for residential powerful pressure washer cleaning job, longest real 120 hours endurance test than similar residential pump. Improved 3000 PSI X 2.5 GPM performance make your cleaning job more powerful for multiple work, like house, fences, sidewalks, vehicles, pool etc..
  • OEM EXTENDED TECHNOLOGY - Based on voice of our millions customers and our original equipment manufacture technology, we process this top level pump that impossible be outdone by so-called Replacemnet Pump. Made in USA key parts and our OEM background is much higher technology, of couse more safe and more durable than similar replacement pump..
  • FIT for WHO - USA Standard Mounting design, this pump could fit most brand gas power washers come with the small gas engine from 180 to 225 cc (Equival 6.0 to 8 hp engine). Please Note only fit a 3/4" Shaft Horizontal pressure washer pump..
  • EASY START EASY JOB - Pre-filled gasoline for lifetime and no need to change oil. Easy set up as video show. Also Easy-Start structure with light recoil start. Make power washer more powerful and more easy. Recommend to drain out water inside pump and use Briggs Stratton and SIMPSON pump guard before long time storage..
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock