Reviews Turbo Shaft Engine

EWK Spark Plug Boot & Wire Removal Tool, Ignition Coil Puller for VW Audi T10112

  • 【 Work Smart 】 This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component..
  • 【 Time Saver 】 The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly..
  • 【 High Quality 】 Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use..
  • 【 Applications 】 Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD). *Not recommended for non-VW/Audi plug leads..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

Replacement Turbo Charger with Gasket Kit- Compatible with Buick and Chevrolet Vehicles - 2011-2019 - Encore, Cruze, Cruze Limited, Sonic, Trax - 1.4L L4, 1.4T Engines - Replaces 55565353, 667-203

  • 【Cooling Type】：Water and Oil cooled. Improves mechanical durability and lengthens the turbocharger’s life.
  • 【Application】: Fit for Briggs and Stratton Briggs Power/ 21R707-0011-G1 Engine.
  • 【Application】:Fit for Small engine Snowmobiles Quads Rhino Motorcycle ATV 500cc-1000cc 100HP.
  • for Suzuki ALTO Works with YA1, F6AT Engine.
  • 【Important Notice】: Please lubricate the turbo bearing fully before installing, TO ADVOID SHAFT PLAY AND DAMAGE IF INSUFFICIENT OIL SUPPLY. Professional installation is highly recommended (No Instruction Included) . This is universal application turbo, so modification might be required for some vehicles.
Check Stock

Sea Eagle FSK16 FishSkiff™16 Inflatable Frameless Fishing Boat 2 Person Swivel Seat Package

  • Capacity: 3 Persons or 1765 lbs. Inflation Time: 17 mins. w/ BTP Two Stage Electric Turbo Pump, Not Included in this package, Inflation Pressure: 15 psi.
  • Hull Weight: 82 lbs (92 lbs. w/ transom) Chambers: 3 Tube Diam: 6″ Drop Stitch.
  • Exterior: 16′ x 4’8″ Interior: 12′ x 3′ Deflated: Approx: 60″ x 24″ x 12″.
  • Material: 1000 Denier Reinforced Drop Stitch Seam: Quadruple Overlapping Superior Glued Seams.
  • Engine Capacity: 10 hp (100 lbs. max weight, 15″ Shaft, Gas Engine), Speed Estimates: Up to 17 mph w/ 1 adult, 14 mph w/ 2 adults.
Check Stock

Sea Eagle FSK16 FishSkiff™16 Inflatable Frameless Fishing Boat 2 Person Swivel Seat Canopy Package

  • Capacity: 3 Persons or 1765 lbs. Inflation Time: 17 mins. w/ BTP Two Stage Electric Turbo Pump, Not Included in this package, Inflation Pressure: 15 psi.
  • Hull Weight: 82 lbs (92 lbs. w/ transom) Chambers: 3 Tube Diam: 6″ Drop Stitch.
  • Exterior: 16′ x 4’8″ Interior: 12′ x 3′ Deflated: Approx: 60″ x 24″ x 12″.
  • Material: 1000 Denier Reinforced Drop Stitch Seam: Quadruple Overlapping Superior Glued Seams.
  • Engine Capacity: 10 hp (100 lbs. max weight, 15″ Shaft, Gas Engine), Speed Estimates: Up to 17 mph w/ 1 adult, 14 mph w/ 2 adults.
Check Stock

Sea Eagle FSK16 FishSkiff™16 Inflatable Frameless Fishing Boat 3 Person Swivel Seat Package

  • Capacity: 3 Persons or 1765 lbs. Inflation Time: 17 mins. w/ BTP Two Stage Electric Turbo Pump, Not Included in this package, Inflation Pressure: 15 psi.
  • Hull Weight: 82 lbs (92 lbs. w/ transom) Chambers: 3 Tube Diam: 6" Drop Stitch.
  • Exterior: 16' x 4'6" Interior: 12' x 3' Deflated: Approx: 60" x 24" x 12".
  • Material: 1000 Denier Reinforced Drop Stitch Seam: Quadruple Overlapping Superior Glued Seams.
  • Engine Capacity: 10 hp (100 lbs. max weight, 15" Shaft, Gas Engine), Speed Estimates: Up to 21.5 mph w/ 1 adult, 12-18 mph w/ 2 adults.
Check Stock

Bouclier Thermique Turbo - Turbocharger Heat Shield Single Titanium Turbo Heat Shield Blanket Barrier Turbo Charger Cover forT3/T25/T28/GT25/GT28/GT30/GT32/GT35/GT37/CT26 Small and Medium or Other T3

  • Compatible with many vehicles, suitable forT3/ T25/ T28/ GT25/ GT28/ GT30/ GT32/ GT35/ GT37/ CT26 small and medium turbochargers or any other T3 turbocharger. - turbo heat shield td05.
  • The turbocharger shield is specifically designed to reduce the amount of radiant heat generated by the turbocharger. - coperta turbo.
  • It reduces turbo lag and helps increase the time of the turbine shaft. - bouclier thermique turbo.
  • It also significantly cuts down the hood temperature for protecting major engine components..
  • Beautiful appearance, fast and convenient disassembly and assembly..
Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock

Vintage Rat Rod Pickup Truck Hot Rod T-Shirt

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

GM 6.2 & 6.5 Liter Diesel Engines: How to Rebuild & Modify

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver

  • 63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
  • Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
  • High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
  • High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
  • Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock