Reviews Engine Cylinder Puller

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

J-35791 Cylinder Liner Puller Remover Tool Sleeve Puller Removal Tool Fit For Non-EGR Detroit Diesel 50 & 60 Series Engines & Volvo D12 D13 D16 Engines Replace For J-35791 M30143

  • APPLICATION: The J-35791 cylinder liner puller remover tool is compatible with the Non-EGR Detroit Diesel 50 & 60 Series engines and Volvo D12 D13 D16 engines..
  • FUNCTION: The cylinder liner puller removal tool used to safely and quickly remove the cylinder liner and reduce the damage to the cylinder in the disassembly process. Save your time and your money..
  • REPLACE FOR : This tool replace for cylinder liner puller remover tool part # J-35791 M30143..
  • MATERIAL: The cylinder sleeve puller removal tool is made of steel, coated with silver finish, anti-rust and anti-corrosion, provide a long lifespan..
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

VEVOR Liner Puller Cylinder Liner Puller, Diesel Engines Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 75 mm-138 mm, Universal Cylinder Liner Puller Tool Set for Auto Repair

  • 75-138 MM Cylinder Liner: This cylinder puller is suitable for all cylinders with a 75-138 mm diameter. Both dry type and wet type can be used. It's ideal for the disassembly of diesel cylinder liner quickly and securely..
  • Premium Pull Plate: Our products are equipped with a total of 7 pcs pull plates (75-80 mm, 85-90 mm, 95-100 mm, 105-110 mm, 115-120 mm, 125-130 mm, 135-138 mm), which have a more extensive disassembly range and more comprehensive functions. 7 pcs pull plates are all cut from 45# steel, thickened, and hardened..
  • Rigid Construction: The manual liner puller is made of premium steel and processed by quenching. It is sturdy, corrosion-proof, and has stable performance. The lead screw and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the cylinder liner, including pull plates, bearing, cross arm, branch pipe, connecting rod, nuts, and pull root. And it's easy to operate..
  • Wide Application: This tool is designed to quickly remove the cylinder liner and reduce the damage to the cylinder in the process. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

Fuel Injector Puller Removal Set Injector Seal Installer Service Tool Kit Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI Petrol

  • Applicable Engine: Injector puller tool set fit 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compitable with Seat....
  • Efficient Replace Injector Seals: This Injector puller set easy to pull injectors, help you to reseal and reinstall fuel injectors, saved you a lot of....
  • More Tools: Our injector puller tool set include 18pcs tools, complete tool kit to help you replace injector only one time, and the case easy to carry.
  • Professional Injector Puller: This designed specifically for VW TSI engine, precisely machined ensure accurate, perfect adaptat VW engine, made of....
  • 12 Months Warranty: We offer 12 months warranty,we will refund or replace if the tool have any quality problem.
Check Stock

Universal Cylinder Liner Puller Assembly - Heavy Duty Diesel Engine Cylinder Liner Puller Used for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” bore, Alternative to PT-6400-C M50010-B 3376015

  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570..
  • 【Direct Replacement】Our universal cylinder liner puller direct replacement for OEM #PT-6400-C, M50010-B and 3376015..
  • 【Function】This universal liner puller works on wet liners of from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148. Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block..
  • 【Important】Threads must be lubricated with J23444-A or equivalent high pressure lubricant for heavy duty truck applications. (Package Includes 1 x Grease AND 1 x Cylinder Liner Puller Tools Kit PT-6400-C.).
  • 【Superior Material】Crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

ENGINE CARBON DEPOSIT, SLUDGE, GRIME NON-CORROSIVE CLEANER MOTOR OIL ADDITIVE WITH TITANIUM OXIDE NANO PARTICLE TECHNOLOGY

  • ENGINE OIL CARBON CLEANER ADDITIVE REMOVE CARBON DEPOSIT INSIDE ENGINE CYLINDER BELOW PISTON RING, OTHER CARBON DEPOSIT CLEANER ONLY SPRAY AND CLLEAN COMBUSTION CHAMBER ON TOP OF PISTON RING..
  • NON-CORROSIVE FORMULA WILL NOT HARM ENGINE PARTS, SEAL, PACKING, PISTON RINGS, SAFELY REMOVE ENGINE CYLINDER CARBON DEPOSIT WITHOUT TAKING APART ENGINE.
  • USE ONE BOTTLE FOR 4 CYLINDER ENGINE, TWO BOTTLES FOR 6 TO 8 CYLINDER ENGINE.
  • FOR SEMI TRUCK DIESEL ENGINES, USE UP TO 8 BOTTLES FOR BEST CLEANING RESULT AND PROTECTION.
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

HMANE γ-Shape Stirling Engine Kit for Adults, DIY Unassembled Retro Generator Model Science Educational Toys with LED Lights, Bronze

  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Easy to assemble and has collection value. It can be used as a decoration or as a school experiment item. Package list: 1 stirling engine.
  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Eas....
Check Stock

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

  • 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
  • Checking Compression On Petrol Engine Quickly And Accurately，The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
  • Completed Kit Comes With Adapters For Most Applications，There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
  • Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
Check Stock

Mini Hot Air Stirling Engine Motor Stirling Engine Science Experiment Kit Miniature Steam Power Physics Toy Lab Teaching Model Children Physics Science Education Toys

  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Easy to assemble and has collection value. It can be used as a decoration or as a school experiment item. Package list: 1 stirling engine.
  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service lif....
Check Stock