Reviews Dust Collection System For Wood Shop

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
  • INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
  • APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
  • VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4....
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

15 Pack 2.5 Gallon Disposable Filter Bags Type B Vacuum Filter Bag for Shop vac all around Qam70 2-gallon vacuum, Part # 90668

  • Type B 9066800 All Around collection filter bags for Shop Vac 2-2.5 Gallon vacuum, for Shop Vac AllAround 7.0 A vacs. (Maroon Tank) and 2 gallon AllAround EZ. The the diameter size of the bags opening is 1-1/2 inch (38 mm).n Tank) and 2 gallon AllAround EZ, for Shop vac all around Qam70 2-gallon vacuum..
  • Package include 15 packs 2-2.5 gallon Type B vacuum bags..
  • Type B 9066800 filtration bags with collar system, help capture fine dust particles from your workshop or house, such as like lint and dust, drywall dust and debris, wood dust and so on, prevents dust from escaping during bag disposal..
  • Reduce clean time, vacuum bags makes debris disposal become quick and easy, reducing the time required to clean the vacuum cleaner..
  • Easy to replace, only for dry use, save time and improve efficiency, no mess when replace..
Check Stock

2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy ....
Check Stock

POWERTEC 70293 Cyclone Dust Collector and Separator Kit w/Clear 6 Gallon Dust Bucket, Hoses, Reducers, Couplers and Hose Clamps

  • INCLUDES: Dust Separator, 6 gallon dust & debris bucket, expandable vacuum hose, reducers, couplers, hose clamps and more.
  • APPLICATION: Cyclone separator kit connects to your shop vac and tool dust collector ports and provides you with a complete assortment of components designed to capture and prevent wood chips and shavings from damaging your system.
  • VERSATILE: Reducers and couplers work with most brands and dust collection systems, accommodating tools such as planers, drum sanders and jointers - Has everything you need to optimize your 2 stage dust collector set-up.
  • EASY TO USE: Whether you’re connecting the separator directly to the dust collector, shop vac or tool dust port, you’ll find that it sets up quickly and easily while generating great separation.
  • PREMIUM: All included parts are made from durable, high quality and temperature/heat resistant material with an anti-clogging design for optimal efficiency.
Check Stock

6-Pack 25-1230 Disposable Filter Bags Replacement for Stanley 4-5 Gallon Wet/Dry Vacuums SL18129, SL18130, SL18130P

  • Compatible Models: 25-1230 Vacuum bags compatible with Stanley 4-5 gallon wet dry vacuums SL18129, SL18130, SL18130P, SL18133. Replace part# 25-1230. (❌Not suitable for SL18115 and SL18115P)..
  • High-efficiency Filtration: Made with 2-ply material for capturing debris such as drywall dust, wood dust, lint and so on, keep the workbench or floor clean..
  • Best Performance: This 4-5 gallon dust collection bags are particularly well suited for dry cleaning of workshop or garage, their durable design allows them to collect more debris. Keep your vacuum cleaner running at near-top efficiency..
  • Reduce Clean Time: Rubber sealing collar system can lock the dust inside, prevent dust from spilling, keep inside of the vacuum drum clean, no need to drag the shop vac outside to empty, save cleaning time..
  • SERVICE: Includes 6 pack 25-1230 vacuum bags replacement for stanley shop vac bags. We offer 60 days full refund or a new replacement for any dissatisfaction, 24h online service..
Check Stock

3M FAPF02-4 Filtrete Ultra Clean Air Purifier Replacement Filter

  • ...an be easily replaced and reusable, no tools required. An outer filter removes larger particles while the inner filter traps smaller particles, ideal for wood carving, sanding, turning, scroll saw work, rotary tools, powder mixing, and more. Hanging air filters are an important part of your shop's overall dust collection setup..
  • 【Set it and Forget it】Built-in timer settings for 1H to 6H will shut off automatically at the end of the designated time, cleaning the air in your workshop even while you're away. For example, you can leave the shop knowing it’ ll shut off in the set time..
  • 【Humanization design, portability】This dust collector can be easily fitted on a benchtop or other work surface where dust is being produced (Easy carrying handles allow easy mobility, rubber feet prevent marring). Built-in RF remote controller allows for operation from any angle of the room, even if a direct line of vision is obstructed, up to 26 feet away with the included remote..
  • 【After Sale without Worry】Each Purisystems air filtration system has been strictly tested to ensure the perfect use of the product and we offer a 2-Years warranty with a professional customer support team ready to assist at any time., truly worry-free shopping. If you meet ....
Check Stock

Abestorm 2-Stage Filtration Air Filtration System for Woodworking, Hanging Air Filtration Dust Collection for Woodworking/Garage/Workshop, DecDust 500 (350/450/500 CFM)

  • ...d deal with partides, dust, sawdust, pet sawdust, and so on. An ingenious buckle structure is designed on both sides of the filter, which is convenient for users to change the filter. .
  • ✔ [Timer Setting, Ideal for Woodworking Air Purification] - This air filtration dust collection for woodworking has remote built-in timer with 1H/2H/3H/4H/5H/6H settings, shut off automatically at the end of the designated time, cleaning the air even while you are away from your woodwork shop. Overload protector built-in also make it automatically shut off, safe to use..
  • ✔ [Hanging Air Filter for Workshop, Easy to Install and Use] - Plug and play, this compact air filtration system can be Hanged from shop ceiling or placed on workbench (rubber feet prevent marring). Two kinds of simple fixed structures are designed on the top of the dust collector, stable and keeping balance, which improves the use of the product to the complex scene. Ideal for workshop / woodworking / shop / garage / table saw / pole barn workshop / wood shop..
  • ✔ [Reliable Quality, 2-Year Warranty & Professional U.S. After-Sales Team] - All Abestorm Air Filtratio....
Check Stock

Supercell High-Pressure Dust Collector (30-Gallon)

  • 10X HIGHER SUCTION POWER than standard dust collectors and the only dust collection system on the market with high enough levels of static pressure (WC) and airflow (CFM) to effectively capture and contain dust from every tool in the shop with a dust port size of 1” to 5”. BEST DUST COLLECTOR – Popular Mechanics 2020 Tool Awards.
  • UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork..
  • HEPA FILTRATION - Premium HEPA-Grade Filter Media with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter..
  • FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 30-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin..
  • INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile. Patent Pending..
Check Stock

2.5 Gallon Shop Vac Bags 15 Pack, Compatible with Shop Vac 2 to 2.5 Gallon Shop Vacuum, Part# 90668, by KEEPOW

  • COMPATIBILITY: These shop vac bags compatible with Craftsman 2 to 2.5 gallon wet dry shop vacuum CMXEVBE17250, also compatible with shop vac 2036000, 5895200, Qam70, for dry debris pick-up only.
  • EFFICIENT DUST CAPTURING: The 90668 vacuum bags hold most of particles and dust from workshop or house. Effectively removing drywall dust, cement dust, sawdust, house debris, lint, wood dust, construction debris and dust.
  • PREVENT BACKFLOW: The replacement shop vac bags can prevent dust, dirty back flow back to the air after the dust bag is full.
  • MORE CONVENIENT: The 90668 fine dust collection bags can be thrown away when it is full, which saves time for cleaning the vacuum cleaner and allows you to spend more time with your family.
  • EASY TO INSTALL: The replacement vacuum bags is easy to install, making it easier to clean the workshop or house.
Check Stock

Rockler 5 Micron Dust Collector Bags - Replacement Dust Bag for Wall Mount Dust Collector – Heavy-Duty Cloth Replacement Bag – Easy to Attach Dust Collection Bag - Dust Collector Accessories

  • 5 Micron Bags For Wall Mount Dust Collector: This 5-micron replacement dust collection bag offers the same size and capacity as the Dust Right Wall Mount Dust Collector's original 30-micron bag, but with much finer particle retention..
  • Specs: Serves as a replacement bag for the Dust Right dust collector system. This dust collector filter bag only works with the Dust Right 650 CFM wall mount-dust collector (sold separately)..
  • High-Quality: This dust collection system replacement bag is made from heavy-duty cloth that’s able to withstand everyday wear and tear applications. These Dust Right dust collector bags are made with heavy-duty cloth and attached easily..
  • Great For Planer: A great dust collector filter bag that works wonderfully on DeWalt planer. This portable dust collector bag captures the dust and chips and doesn't need any adapters or fancy collection containers or hoses..
  • Compatibility: This rockler dust collection bag is designed to work as a top dust filter bag for most popular power tool dust collection systems such as delta, grizzly, shop fox, and more..
Check Stock

4 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 4 inch Turnkey Stainless Steel Hose Clamps

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy ....
Check Stock