Reviews Dust Collection System For Home 2

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
  • INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
  • APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
  • VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4....
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

DEWALT Miter Saw Dust Collection Adapter, DWE575/DWE575SB Compatible (DWE575DC)

  • Dust port attachment allows the connection to a dust collection system or vaccum.
  • Accepts common 1- 1/2" diameter hoses, allowing system flexibility.
  • Compatible with DEWALT's dust collection system adapters DWV9150 and DWV9100.
Check Stock

Heroines

  • ...059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely use....
Check Stock

POWERTEC OS1400 2.6 Amp Benchtop Oscillating Spindle Sander

  • INCLUDES: (1) oscillating spindle sander, (6) sander sleeves, (5) rubber sandpaper drums, (6) table inserts, (5) drum washers, and (1) spindle knob.
  • FEATURES: A lightweight portable design, sturdy and stable full coverage work table, easy to change sanding sleeves in assorted sizes for versatility, and onboard storage for all of your sander parts.
  • UNIQUE DESIGN: Our home improvement sander flaunts an 14” cast iron worktable with a true-round design, delivering full support for an assortment of different sized and shaped projects.
  • POWER: 2/5 Horsepower - 2. 6 Amp induction motor provides 1725 RPM.
  • DUST PICKUP: Possesses a highly functional built-in dust collection system with a 2 inch port that works with an assortment of dust collectors and shop vacs to keep your work space clean and clear of saw dust.
Check Stock

Makita Sheet Finishing Sander, 1/3 In, 1.7 A, Teal (BO3710)

  • Ergonomic rubberized grip and handle designed for better fit and added comfort.
  • 11,000 OPM for increased efficiency and smooth finish sanding.
  • Built-in counterbalance system engineered to reduce vibration.
  • Large 2-finger trigger switch with conveniently-located lock-on button for continuous use and increased operator comfort.
  • Efficient through-the-pad dust collection system for a cleaner work environment.
  • Large rubberized clamping lever for quick and easy paper installation.
  • Aluminum cast shoe base for increased durability.
  • High capacity dust bag with built-in vacuum adaptor for improved dust collection.
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

Great Working Tools Detail Sander Palm Sander with Dust Collection Bag 87 pcs Sandpaper, 1.1 Amp 14,000 OPM

  • POWER & PRECISION - The powerful 1.1 Amp motor generates 14,000 orbits per minute with a highly eccentric random orbit for a larger sanding area, less re-sanding, a smooth finish. It's sure to make quick work of even large projects while the lightweight design and comfort grip reduce fatigue and vibration..
  • DUST COLLECTION SYSTEM - Our integrated dust collection system uses suction to move sawdust and other fine particles into the reusable dust bag. It's easy to empty and a snap to clean. You'll be left with less dust in your workshop to sweep up and fewer irritants in the air..
  • INCLUDES SAND PAPER - Your Great Working Tools Orbital Detal Sander comes with 87 sanding pads in various grits, so you're ready to go right out of the box. A hook and loop system on the pads and sanding base provide quick and easy changing of pads..
  • MAKES A GREAT GIFT - The perfect addition to any DIY'er or handyman's tool kit. Details: 120V- 60Hz, 1.1 Amp motor with 14,000 OPM, double insulated with 6' power cord. Weighs 2.2 lbs..
Check Stock

POWERTEC 70276 4-Inch to 2-1/2-Inch Dust Collection Splitter Fitting

  • INCLUDES: (1) 4” to 2-1/2” Dust Collection Hose Splitter.
  • FUNCTION: Allows you to connect a 4” ID dust hose with two 2-1/2” ID dust hoses, while providing minimal suction loss from your assorted connections.
  • APPLICATIONS: These dust collection fittings are perfect for optimizing the effectiveness of your dust collector system when paired with standard shop vac or other 2.5” hoses.
  • BUILD: This y-adapter splitter is made with impact resistant ABS plastic for long-term durability and a heavy duty profile commonly needed for workshop and woodworking set-ups.
  • PORT DIMENSIONS: 4” Nominal OD – 3.902” or 3-29/32”, ID 3.733” or 3-47/64” 2-1/2” Nominal OD – 2.5” or 2-1/2”, ID – 2.32 “or 2-21/64”.
Check Stock

Great Working Tools Detail Sander Palm Sander with Dust Collection Bag & 27 pcs Sandpaper, 1.1 Amp 14,000 OPM

  • POWER & PRECISION - The powerful 1.1 Amp motor generates 14,000 orbits per minute with a highly eccentric random orbit for a larger sanding area, less re-sanding, a smooth finish. It's sure to make quick work of even large projects while the lightweight design and comfort grip reduce fatigue and vibration..
  • DUST COLLECTION SYSTEM - Our integrated dust collection system uses suction to move sawdust and other fine particles into the reusable dust bag. It's easy to empty and a snap to clean. You'll be left with less dust in your workshop to sweep up and fewer irritants in the air..
  • INCLUDES SAND PAPER - Your Great Working Tools Orbital Detail Sander comes with 27 sanding pads (9 x 80 grit, 9 x 120 grit, 9 x 180 grit), so you're ready to go right out of the box. A hook and loop system on the pads and sanding base provide quick and easy changing of pads..
  • MAKES A GREAT GIFT - The perfect addition to any DIY'er or handyman's tool kit. Details: 120V- 60Hz, 1.1 Amp motor with 14,000 OPM, double insulated with 6' power cord. Weighs 2.2 lbs..
Check Stock

Makita 565056-5 Power Supply Cord

  • 1-1/4" diameter x 10-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection.
  • The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
Check Stock

Rockler 5 Micron Dust Collector Bags - Replacement Dust Bag for Wall Mount Dust Collector – Heavy-Duty Cloth Replacement Bag – Easy to Attach Dust Collection Bag - Dust Collector Accessories

  • 5 Micron Bags For Wall Mount Dust Collector: This 5-micron replacement dust collection bag offers the same size and capacity as the Dust Right Wall Mount Dust Collector's original 30-micron bag, but with much finer particle retention..
  • Specs: Serves as a replacement bag for the Dust Right dust collector system. This dust collector filter bag only works with the Dust Right 650 CFM wall mount-dust collector (sold separately)..
  • High-Quality: This dust collection system replacement bag is made from heavy-duty cloth that’s able to withstand everyday wear and tear applications. These Dust Right dust collector bags are made with heavy-duty cloth and attached easily..
  • Great For Planer: A great dust collector filter bag that works wonderfully on DeWalt planer. This portable dust collector bag captures the dust and chips and doesn't need any adapters or fancy collection containers or hoses..
  • Compatibility: This rockler dust collection bag is designed to work as a top dust filter bag for most popular power tool dust collection systems such as delta, grizzly, shop fox, and more..
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock