Reviews Drive Shaft Center Support Bearings

ECCPP Complete Rear Drive Shaft Prop Shaft Assembly Fit for Porsche Cayenne 2003-2010 for VW Touareg 2004-2008

  • ...le for Porsche Cayenne 2003 2004 2005 2006 2008 2009 2010, Compatible for Volkswagen Touareg 2004 2005 2006 2007 2008 2009 2010. Please enter your Year / Make / Model information in the query tool at the top left to confirm your fitment.
  • COMPREHENSIVE TEST - The drive shaft is a rotating body with high speed and few supports. So we have balanced and tested the drive shaft. In addition, we will carry out strict tests on the specification of the drive shaft and the power transfer efficiency of the universal joint, to ensure that the drive shaft meets optimum performance and specifications.
  • WHY REPLACe - When your drive shaft fails, the car would start with a clucking sound, and the chassis would always produce abnormal noise and the car body would produce obvious vibration during driving. This is usually due to wear and tear of the drive shaft and its parts, deformation and loss of dynamic balance. It will make your car less powerful and use more energy, and make your driving experience worse. So it is necessary to inspect and replace timely.
  • DIRECT REPLACEMENT - OE standard specification, lubricated has been carried out. You will get 1 drive shaft with center support bearing and 1 bearing support fR-ame with 2 bolts. Plug and play, perfectly fit for....
Check Stock

Fin Nor 105SZ Offshore SP Reel

  • Strong aluminum body, side plate and rotor.
  • Stainless steel drive gear, pinion gears, and center shaft.
  • 4 double-shielded stainless steel bearings.
  • 11-Disc stainless steel and carbon fiber drag System.
Check Stock

Boston Gear LHA2 Self-Aligning Ball Bearing, Spherical, Precision, 0.165\ Bore, Steel

  • Size - Model: 1029 (Inner Diameter=9mm, Outer Diameter=26mm, Thickness=8mm).
  • Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel..
  • Features - Double row, open type. ABEC1 accuracy, normal clearance..
  • Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection..
  • Package Content - 1 x Self-Aligning Ball Bearings.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

  • Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
  • Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
  • Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
  • Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
  • 100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

NTN Bearing 1202 Double Row Self-Aligning Radial Ball Bearing, Normal Clearance, Standard Cage, 15 mm Bore ID, 35 mm OD, 11 mm Width, Open

  • Size - Model: 1029 (Inner Diameter=9mm, Outer Diameter=26mm, Thickness=8mm).
  • Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of nylon..
  • Features - Double row, open type. ABEC1 accuracy, normal clearance..
  • Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection..
  • Package Content - 2 x Self-Aligning Ball Bearings.
Check Stock

uxcell 4mm Drive Shaft, L250mm Shaft, L200mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • The material OF SHAFT - stainless steel..
  • SIZE - suit for motor shaft diameter: 3.17 mm.
  • drive shaft size: 250 x 4 mm (length*diameter).
  • shaft sleeve size: 200 x 9.5 mm (length*outer diameter).
  • NOTE - there are bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in a whirl..
  • APPLICATION - compatible with DIY model..
  • PACKAGE CONTENT - 1 x Drive shaft assemble kit..
Check Stock

Drive Gear with Bushing P1012 for Wizard, Challenger, Amarr Openers

  • Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings, instructions.
  • Compatible with chain drive chamberlain sears craftsman manufactured operators 1984.
  • Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.
  • Verified 100% authentic OEM lift master product.
Check Stock

Direct Replacement for Liftmaster 41C4220A Gear and Sprocket Kit

  • Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings, instructions included.
  • fits chain drive chamberlain sears craftsman manufactured operators 1984-current.
  • fits chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.
Check Stock

Liftmaster Gear Kit 41C4220A Gear & Sprocket Assembly Direct Replacement

  • Includes: Gear and Sprocket, Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings,Instructions.
  • Compatible with CHAIN Drive Chamberlain Sears Craftsman Manufactured operators 1984-current.
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models.
  • Verified 100% Authentic OEM Liftmaster Product- New Production Dates..
Check Stock

Gear Sprocket Kit Door Opener Gear kit 1/3-1/2HP Liftmaster Sears Craftsman Garage Door Opener Part

  • Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings, instructions.
  • Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current.
  • Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.
  • Verified 100% authentic OEM lift master product- new production dates.
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock