Reviews Double Acting Cylinder Pneumatic

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

MAL Series Aluminum Alloy Mini Pneumaitc Air Cylinder 25mm Bore 200mm Stroke Single Rod Double Acting Air Cylinder with Y Connector and 2Pcs 6mm Pneumatic Quick Fitting

  • Bore: 1”(25mm) ； Stroke: 8”(200mm) ； Port Size: PT1/8.
  • Piston Rod Type: Single Rod ； OD: Φ10mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
  • Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
  • Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
  • What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y25 Connector, 2 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

MAL Series Aluminum Alloy Mini Pneumaitc Air Cylinder 32mm Bore 75mm Stroke Single Rod Double Acting Air Cylinder with Y Connector and 2Pcs 6mm Pneumatic Quick Fitting

  • Bore: 1 1/4”(32mm) ； Stroke: 3”(75mm) ； Port Size: PT1/8.
  • Piston Rod Type: Single Rod ； OD: Φ12mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
  • Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
  • Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
  • What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y32 Connector, 2 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

Aluminum Alloy Mini Pneumaitc Air Cylinder MAL20x300 (20mm/0.8” Bore 300mm/12” Stroke) Single Rod Double Acting Air Cylinder with Y Connector and 4Pcs 6mm Pneumatic Quick Fitting

  • Bore: 3/4”(20mm) ； Stroke: 12”(300mm) ； Port Size: PT1/8.
  • Piston Rod Type: Single Rod ； OD: Φ8mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
  • Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
  • Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
  • What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y Connector, 4 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

Sydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting

  • Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
  • Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
  • Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

  • SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
  • HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
  • EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
  • VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
  • LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

VEVOR Hydraulic Directional Control Valve, 1 Spool Hydraulic Spool Valve, 21 GPM Hydraulic Loader Valve, 3600 PSI Directional Control Valve, Hydraulic Valves And Controls For Tractors Loaders Tanks

  • [DOUBLE ACTING]- 1 Spools monoblock for double acting cylinders. Hydraulic control valve for operating double acting cylinders..
  • [Control method]- The valve has a variety of control methods, including manual control, pneumatic control, hydraulic and electric control options..
  • [DURABLE QUALITY]- Come with 1 spools with Joystick Control, 11 GPM Flow, 3600 Max PSI..
  • [SPRING RETURN]- All spools standard come with spring return, which can return to the neutral position..
  • [WIDELY USED]- This valve is widely used in hydraulic systems of construction machinery such as forklifts, sanitation vehicles, small loaders, etc..
Check Stock

TAILONZ PNEUMATIC 10mm Bore 75mm Stroke Double-Rod Double-Acting Aluminum Pneumatic Air Cylinder TN10-75

  • 【Product Name】Double-Rod Double-Acting Air Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

TAILONZ PNEUMATIC 32mm Bore 50mm Stroke Double-Rod Double-Acting Aluminum Pneumatic Air Cylinder TN32-50

  • 【Product Name】Double-Rod Double-Acting Air Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

8 Quart DC 12V Hydraulic Pump Power Supply Unit Pack Double Acting Dump Trailer Fit for Lift Unloading

  • Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
  • Double Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
  • Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Double-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
  • Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..
Check Stock