Reviews Diy Power Filter

AFA Aquarium Filter Media Sponge Pad, Fish Tank Bio Open Cell Coarse Foam Block Foam Pre Filter Sponge Material (12" x 36" x 1" 25ppi)

  • The open cell sponge has a much larger inner surface area for filtration..
  • This filter pad can be cut to fit and used as a pre-filter for any aquarium or pond filter, sump, wet/dry, canister, power filter etc. or your HMF DIY project..
  • Traps large bits of waste and provides better water flow rate and less chance of clog..
  • This filter sponge pad can last a long time. The dense structure of our sponge filter foam pad media prevents tearing, making them easy to clean and reuse..
Check Stock

Taramp's Five-Way Electronic Car Audio Crossover System,Black,CRX5

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock

Dust Deputy 2.5 DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD 2.5 DIY)

  • ... INCREASED SUCTION POWER - The original and still the best! Now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy 2.5 cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!.
  • LONGER LIFESPAN - Prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy 2.5 will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand..
  • MADE IN AMERICA – Our Dust Deputy 2.5 DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains the cyclone separator, gasket, and mounting hardware. You supply the waste container, the hose, etc. With the Dust Deputy DIY cyclone, you're limited only by your imagination! US Pat. 7282074 and patent pending.
  • Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blast....
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

  • Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station..
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily..
  • Easy to replace filter, Includes one smoke trap replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

200W Pure Bass Subwoofer Crossover Second-Order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • 2-Way Crossover Filters Frequency Distributor.
Check Stock

APEC Tankless RO Water Filter System ROTL-AIO - Four-in-One Premium Reverse Osmosis Water Filtration, 2:1 Pure to Drain, Filters Fluoride, Heavy Metals, 1K+ Impurities, Easy DIY Install & Care

  • ALL-IN-ONE TANKLESS RO SYSTEM - The four-in-one premium APEC RO filter provides crisp purified water without the hassle of a multi-filter setup! The ROTL-AIO tankless RO System is ideal for those with limited under the counter space, allowing you to de-clutter and have an organized space! The footprint size is as small that of a letter sized paper (5.75" x 11.75" x 17.5"). Produce pure drinking water at a rate of 600 GPD (Gallons per Day)!.
  • SUPREME WATER FILTRATION - Proprietary water filter developed by APEC delivers superior water filtration. Removes impurities down to 0.0001 microns and 1,000+ impurities like Heavy Metals (Arsenic, Lead, Mercury, and MORE), Harmful Impurities (Fluoride, Chlorine, Nitrates, PFAS, and lowers TDS (total dissolved solids).
  • FOUR-IN-ONE FILTER - Proprietary APEC technology, the single stage RO system can achieve superior filtration for pure crisp water. Made of four distinct layers [1st - ACF] Captures sediment: Rust, and Residual Chlorine. [2nd - RO-600G] Intercepts dissolved solid ions: Heavy Metals and Harmful Agents. [3rd - CB] Removes unwanted colors and odors. [4th - PP] Conditions water by removing carbon particle....
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station with 5 Pack Carbon Filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Fein Turbo II X AC HEPA Professional Wet/Dry Dust Extractor Vacuum Cleaner - 1100 Watts, 153 CFM Suction Capacity, 98 PSI Static Water Lift, 31.9 Pound Weight - 92030060990

  • Outstanding Performance - It offers fully automatic filter cleaning for long service life of the specially designed HEPA filter. Good for use with power woodworking tools or for car vacuum detailing or even to keep your carpet or upholstery cleaner..
  • Further Reach - The Turbo II has a large range due to its 25 ft power cord and 13 ft long reach vacuum hose and offers ergonomic transport thanks to push handle, case and accessory fastening..
  • Industry Made - It has an autostart outlet with power-on delay to prevent current spikes, anti-static function against electrostatic charging, and tool coupling with suction control for easy control of suction power..
  • Convenience + Versatility - Our practical storage area with rim lets you leave your tool bag on top as you move around or have a DIY cyclone dust extractor addition. The accessory set offers the ideal equipment for many applications..
  • Specifications - 1100 Watts, 153 CFM Suction Capacity, 98 PSI Static Water Lift, 9.2 Gallon Capacity, 70 dB Sound Pressure Level and 31.9 lbs Weight..
Check Stock

XINGYHENG DC-DC High Power Adjustable Booster Regulator Module Input 3.0~35V to Output 3.5~35V 100W with Digital Display Voltmeter Voltage Power Supply Converter Module

  • Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use..
  • Package including: 1 Pack of module, which consist of high-precision USB port, high frequency filter capacitor and power indicator. A large area of copper and dense vias enhance heat dissipation. it has current limiting, short circuit and over temperature protection. Even if the output is short circuit, it will not burn out the module and it is safer..
  • High Performance : Input voltage is about 3V-35V. Output voltage is about adjust between 3.5-35V. Input current is 9A (Max), output current is 6A (Max). Self-calibration voltmeter is more convenient to monitor and adjust the output or input voltage to ensure more accurate and stable output voltage..
  • High Power High Efficiency: High conversion efficiency up to 96%. high power, high efficiency and low ripple with power indicator. The ripple and volume of are less, achieving good effect with a small capacity filter. With over - temperature protection and power indicator, it is safer to use..
  • A wide range of applications: This module can be useful for a wide range of applications, such as battery, power transformer, DIY adjustable powe....
Check Stock

150W Frequency Divider 4~8 Ohm Ajustable Treble/Bass 2-Way Speaker Audio Crossover Filter for Subwoofer HiFi Speaker Home Car Audio Set DIY (2700Hz)

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock

Bullard 20TICN Airline Tychem Hood with Inner Bib Capacity Volume Tychem Standard White

  • INCREASED SUCTION POWER - The original and still the best! Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust....
  • LONGER LIFESPAN - Prevents fine dust and large debris from reaching your wet/dry vacuum's filter, reducing the need for cleanings and prolonging the....
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0" ports....
  • MADE IN AMERICA – Our Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains....
Check Stock

ACBungji Misting Cooling System with Pump Filter Kit,20FT/6M Mist Line 6 Brass Mist Nozzle 116 PSI 5L/Min DIY for Outdooor Patio Porch Greenhouse Backyard

  • Including: 12V pump + AC adapte + converter + filter + 11.5feet/3.5M water hose + 20feet/6M mist line + 6 brass nozzle + 6 splitter + 20 saddle clamp+ 20 cable tie + sealing belt + manual. Kindly Reminder: Please install as the product manual to avoid leak. If it is leaked, please using sealing belt. And 2 connector of pump should add joint ring. Joint ring is not included in package..
  • Come with pump and filter. Apply to cister/pool/bucket with early rough water filtration, filter should fully sink into water with heavy load. Or directly connect to tap with another threaded adapter(3/4") and remove filter.
  • Easy for DIY. After buttoning mist nozzle, assembling pump and filter, holing mist line in position, charging with electricity, smooth cool mist will come in 1 minute, bring you joy and relaxed, lightly chill skin and ease heat of warm & humid days.
  • Great for front porch, garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, small fountain, etc.
  • Other. 12V 60W pump, flow rate 5L/min, working pressure 165 psi/0.8Mpa, size 16.5*10*6cm.
  • 12V 6A 60W AC to DC Adapter Power Supply.
Check Stock