Reviews Disc Brake Caliper Alignment Tool

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity..
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...rake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers

  • DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
  • WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
  • QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
  • HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
  • CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the blue rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
  • 【Wide Range Of Applications】The caliper piston spreader press ....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the red rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..
  • 【Wide Range Of Applications】The caliper piston spreader press t....
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock

Lang Tools 277 Brake Caliper Press

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy tr....
Check Stock

HARDK Brake Caliper Press and Telescoping Magnetic Pick Up Tool 20 lb Set Car Brake Caliper Ratcheting Piston Spreader Press Tool Wrench Spreader Tools 360 Degree Ratchet Swing

  • 【 Versatile Tool 】 EWK brake caliper press tool is ideal for cars, trucks, and some commercial vehicles.
  • Suitable for disc brake system with twin....
  • 【 Time & Effort Saver 】 360-degree swing design makes the brake caliper compression tool easy to insert into the caliper and use from any....
  • 【Easy to Use】 Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your....
  • 【 Ratcheting Design 】 Because of the ratcheting mechanism, you will need to apply some pressure to squeeze the spreaders inward, then you are able....
  • 【 Excellent Support 】 Service and Quality guaranteed! EWK provides you premium quality tools with 12 months warranty. If there is any problem or....
Check Stock

FIVE BANANAS Brake Caliper Press Tool Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates Red

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

THOROAD Brake Caliper Press Tool, Brake Caliper Compression Tool,Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates (Red)

  • ... to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly..
  • 【 】THOROAD brake caliper compression tool ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Suits for disc brake, NOT for drum brake..
  • 【】The brake caliper press is equipped with two groups of push plates,the size is 7.04x2.36 inches and 4.57x2.2 inches. The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03” please allow slight size difference due to the difference of manual measurement..
  • % ❤ ：THOROAD is a professional brand with many years of experience in the development of automotive repair tools, and we provide....
Check Stock